Fluoroscopy-based 3-D reconstruction of femoral bone cement: a new approach for revision total hip replacement

In revision total hip replacement the removal of the distal femoral bone cement can be a time consuming and risky operation due to the difficulty in determining the three-dimensional (3-D) boundary of the cement. We present a new approach to reconstruct the bone cement volume by using just a small number of calibrated multiplanar X-ray images. The modular system design allows the surgeon to react intraoperatively to problems arising during the individual situation. When encountering problems during conventional cement removal, the system can be used on demand to acquire a few calibrated X-ray images. After a semi-automatic segmentation and 3-D reconstruction of the cement with a deformable model, the system guides the surgeon through a free-hand navigated or robot-assisted cement removal. The experimental evaluation using plastic test implants cemented into anatomic specimen of human femoral bone has shown the potential of this method with a maximal error of 1.2 mm (0.5 mm RMS) for the distal cement based on just 4-5 multiplanar X-ray images. A first test of the complete system, comparing the 3-D-reconstruction with a computed tompgraphy data set, confirmed these results with a mean error about 1 mm.     

Flexible Digital Receiver Architecture with Optimized Components

Future wireless communication systems require increased flexibility, lower power consumption, smaller size and decreasing costs for the terminals and therewith for the components. By replacing analogue by digital signal processing the degree of integration and the flexibility of a terminal with respect to multi-mode capability can be improved.In a highly integrated implementation the most critical components are the A/D-converter and the digital filter stages due to high speed and low power requirements. In this contribution a novel concept for a flexible, digital receiver with highly optimized components will be presented. The concept is based on down-conversion of the broadband receive signal to a low intermediate frequency. The main modules of the receiver are a properly designed ΔΣ-modulator for A/D-conversion, and novel digital filtering stages. It will be demonstrated, that the use of cascaded low-order wave digital lattice filters results in a number of advantages and makes a very efficient realization in VLSI-technology feasible.     

Investigations on the curing of epoxides with phthalic anhydride

The anhydride curing of epoxides was studied by performing copolymerizations of epichlorohydrin, phenyl glycidyl ether (PGE), or bisphenol-A-diglycidyl ether (BADGE) with phthalic anhydride (PSA). As initiators, tertiary amines or ammonium salts were used. In the case of epichlorohydrin, linear polyesters were obtained at 100°C. At higher temperatures (140–160°C), a side reaction of the CH₂Cl group took place which caused branching and partial crosslinking of the polymer. The reaction of phenyl glycidyl ether with phthalic anhydride gave linear, strongly alternating copolymers at temperatures of 120–160°C. Molecular weights (M¯_n) were in the range of 4000–87,000, depending on the purity of the starting materials and the initiator used. The reaction of the diepoxide BADGE with phthalic anhydride yielded highly crosslinked products. Their crosslink densities (which correlate with the glass transition temperature T_g). however, did not show the same dependence on initiator and purity of the starting materials as the molecular weights of the linear polyesters obtained by the “model reaction” of PGE with PSA. Possible reasons for this effect are discussed.     

A queueing model of an energy harvesting sensor node with data buffering

Battery lifetime is a key impediment to long-lasting low power sensor nodes and networks thereof. Energy harvesting—conversion of ambient energy into electrical energy—has emerged as a viable alternative to battery power. Indeed, the harvested energy mitigates the dependency on battery power and can be used to transmit data. However, unfair data delivery delay and energy expenditure among sensors remain important issues for such networks. We study performance of sensor networks with mobile sinks: a mobile sink moves towards the transmission range of the different static sensor nodes to collect their data. We propose and analyse a Markovian queueing system to study the impact of uncertainty in energy harvesting, energy expenditure, data acquisition and data transmission. In particular, the energy harvesting sensor node is described by a system with two queues, one queue corresponding to the battery and the other to the data buffer. We illustrate our approach by numerical examples which show that energy harvesting correlation considerably affects performance measures like the mean data delay and the effective data collection rate.     

Sequential activation of a segmented ground pad reduces skin heating during radiofrequency tumor ablation: optimization via computational models

Radiofrequency (RF) ablation has become an accepted treatment modality for unresectable tumors. The need for larger ablation zones has resulted in increased RF generator power. Skin burns due to ground pad heating are increasingly limiting further increases in generator power, and thus, ablation zone size. We investigated a method for reducing ground pad heating in which a commercial ground pad is segmented into multiple ground electrodes, with sequential activation of ground electrode subsets. We created finite-element method computer models of a commercial ground pad (14 times 23 cm) and compared normal operation of a standard pad to sequential activation of a segmented pad (two to five separate ground electrode segments). A constant current of 1 A was applied for 12 min in all simulations. Time periods during sequential activation simulations were adjusted to keep the leading edge temperatures at each ground electrode equal. The maximum temperature using standard activation of the commercial pad was 41.7degC. For sequential activation of a segmented pad, the maximum temperature ranged from 39.3degC (five segments) to 40.9degC (two segments). Sequential activation of a segmented ground pad resulted in lower tissue temperatures. This method may reduce the incidence of ground pad burns and enable the use of higher power generators during RF tumor ablation.     

On the search for low correlated binary sequences

The construction of binary sequences with low aperiodic correlation is one of the most famous, but also one of the most challenging, problems in signal design theory. In recent decades, many approaches from different mathematical disciplines have been used to tackle the problem. This paper summarizes the known results and adds some new results on the peak correlation of extended Legendre sequences and on binary arrays.     

Gaschromatographische Bestimmung der h?heren Ester in Weindestillat, Weinbrand, Branntwein und Wein. II

Zusammenfassung Auf Grund der Beobachtung, daß freie Fettsäuren die Bestimmung höherer Äthylester \ bei gaschromatographischer Trennung an Carbowax 20 M stören können, wurden Reihenversuche zur Eliminierung dieser Störpartner durchgeführt. Dabei erwies sich Natriumhydrogencarbonat günstiger als Natriumcarbonat. Eine geeignete Methode zur Bestimmung der gradkettigen Äthylester der Capron- bis Stearinsäure, die auch für die Äthylester von ungesättigten C₁₆- und C₁₈-Säuren verwendet werden kann, wird angegeben.

---

Determination of the ethyl esters of long chain fatty acids in wine distillate, brandy, and wine. II

Summary Free fatty acids are able to interfere the determination of the ethyl esters by gas chromatography on Carbowax 20 M. Therefore series of tests were made to remove the fatty acids. Sodium hydrogen carbonate was found to be more suitable than sodium carbonate. A method is described to determine the ethyl esters of fatty acids of caproic to stearic acid and of the unsaturated fatty acids with 16 and 18 carbon atoms.

     

Nongeminate and Geminate Recombination in PTB7:PCBM Solar Cells

A combination of transient photovoltage (TPV), voltage dependent charge extraction (CE), and time delayed collection field (TDCF) measurements is applied to poly[[4,8‐bis[(2‐ethylhexyl)oxy]benzo[1,2‐b:4,5‐b']dithiophene‐2,6‐diyl] [3‐fluoro‐2‐[(2‐ethylhexyl)carbonyl] thieno[3,4‐b]thiophenediyl]] (PTB7):[6,6]‐phenyl‐C71‐butyric acid (PC₇₁BM) bulk heterojunction solar cells to analyze the limitations of photovoltaic performance. Devices are processed from pure chlorobenzene (CB) solution and a subset is optimized with 1,8‐diiodooctane (DIO) as co‐solvent. The dramatic changes in device performance are discussed with respect to the dominating loss processes. While in the devices processed from CB solution severe geminate and nongeminate recombination is observed, the use of DIO facilitates efficient polaron pair dissociation and minimizes geminate recombination. Thus, from the determined charge carrier decay rate under open circuit conditions and the voltage dependent charge carrier densities n(V), the nongeminate loss current J_loss of the samples with DIO alone enables the reconstruction of the current/voltage (j/V) characteristics across the whole operational voltage range. Geminate and nongeminate losses are considered to describe the j/V response of cells prepared without additive, but lead to a clearly overestimated device performance. The deviation between measured and reconstructed j/V characteristics is attributed to trapped charges in isolated domains of pure fullerene phases.     

4D Biofabrication: 3D Cell Patterning Using Shape‐Changing Films

A novel approach for fabrication of 3D cellular structures using new thermosensitive shape‐changing polymer films with photolithographically patterned surface—4D biofabrication is reported. The surface of shape‐changing polymer films is patterned to selectively adsorb cells in specific regions. The 2D cell pattern is converted to the 3D cell structure after temperature‐induced folding of the polymer films. This approach has a great potential in the field of tissue engineering and bioscaffolds fabrication.     

Inwards Interweaving of Polymeric Layers within Hydrogels: Assembly of Spherical Multi‐Shells with Discrete Porosity Differences

The unique inwards interweaving morphology of polyamines and polyacids within agarose hydrogels that leads to the formation of striated shells with different porosities within the spherical scaffold is reported. Microcompartments with sophisticated structures are commonly used in drug delivery, tissue engineering, and other biomedical applications. However, a method capable of producing well‐defined, multiporous shells within a single compartment is still lacking. By the alternating deposition of polyallylamine (PA) and polystyrenesulfonic acid (PSS) in 1‐butanol, at equal mass ratios, multiple levels of porosity are generated within an agarose microsphere. Each level of porosity is represented by a well‐defined, concentric shell of interweaving PA and PSS layers. The number, thickness, and porosity of the striated shells can be easily controlled by varying the number of PA/PSS bilayers and the polymer concentration, respectively. The feasibility of utilizing this morphology for the assembly of a multi‐shell porous spherical scaffold is validated by trapping different molecular weight dextrans within different regions of porosity. The unique interaction of polyacids and polyamines in hydrogels represents a facile and inexpensive approach to the development of intricate scaffold architectures.