Application-Layer Traffic Analysis of a Peer-to-Peer System

Characterizing traffic behavior helps to optimize the network architecture for improved performance. Using a modified LimeWire servent (for both the server and client) and a variance-time plot for traffic characterization, the authors analyze the Gnutella protocol's traffic shape and find that the messages exhibit a self-similar shape. This result shows network designers that they need to consider the self-similar traffic shape in their set-up — for instance, by introducing appropriate buffer sizes.     

Phase Transformation Modelling and Parameter Identification from Dilatometric Investigations

The goal of this paper is to propose a new approach towards the evaluation of dilatometric results, which are often employed to analyse the phase transformation kinetics in steel, especially in terms of continuous cooling transformation (CCT) diagram. A simple task of dilatometry is deriving the start and end temperatures of the phase transformation. It can yield phase transformation kinetics provided that plenty metallographic investigations are performed, whose analysis is complicated especially in case of several coexisting product phases. The new method is based on the numerical solution of a thermomechanical identification problem. It is expected that the phase transformation kinetics can be derived by this approach with less metallographic tasks. The first results are remarkably promising although further investigations are required for the numerical simulations.     

Durability of Brick Lined Steel Ladles from a Mechanical Point of View

The refractory lining in steel ladles is exposed to chemical and mechanical loads during the heats. Mechanical loads develop from the thermal expansion of the refractories which is confined either by the steel construction or by regions of different temperature within the refractory material. The aim of this work was the investigation of factors influencing the mechanical durability of refractory steel ladle linings and the clarification of failure mechanisms. Especially irreversible strains at the hot face of the working lining caused by compressive stresses induce an opening of joints at the hot face. The irreversible strains reduce the compressive stresses in circumferential direction and increase the probability of tensile failure. A further effect of the irreversible strains is a reduced stability of the working lining. Of special interest in this context is a possible controlled expansion of bricks to counterbalance the irreversible compressive strains.     

The effect of phosphorus on creep in copper

Pure copper with an addition of about 50 ppm phosphorus is the planned material for the outer part of the waste package for spent nuclear fuel in Sweden. Phosphorus is added to improve the creep ductility but it also strongly increases the creep strength. In the present paper the influence of phosphorus on the strength properties of copper is analysed. Using the Labusch-Nabarro model it is demonstrated that 50 ppm has a negligible influence on the yield strength in accordance with observations. For slow moving dislocations, the interaction energy between the P-atoms and the dislocations gives rise to an agglomeration and a locking. The computed break away stresses are in agreement with the difference in creep stress of copper with and without P-additions.     

Creep in phosphorus alloyed copper during power-law breakdown

During the first phase of storage, creep will take place in the copper canisters in the KBS-3 package for nuclear waste. The temperatures are below 100 °C, and the creep is well inside the power-law breakdown regime. Creep models for this situation have been developed. The analysed material is pure copper with about 50 ppm phosphorus. Constitutive equations for creep and other plastic deformation have been set up based on a generalised Norton expression and Kocks-Mecking’s model for the back stress. A model for the minimum creep rate based on fundamental principles for climb and glide has been derived. This model gives the correct order of magnitude for the creep rate in the temperature range from 400 to 20 °C without the use of fitted parameters. The creep exponent varies from 5 to 105 in this interval. The constitutive equations have also been formulated for multiaxial stress states.     

A Multicriteria Decision Support Methodology for Annual Rehabilitation Programs of Water Networks

Abstract:   This article provides an overview of a multicriteria decision support methodology for annual rehabilitation programs of water networks. A first set of criteria is formulated for the purpose of comparing and ranking rehabilitation projects. Each proposed criterion is a measure of a particular impact of the condition of a pipe. The ELECTRE TRI method is implemented for defining rehabilitation priorities . Two reference profiles are used to define the limits of three categories associated with three increasing priority levels. With these two reference profiles, applying the ELECTRE TRI method to an asset stock ( a set of pipes that are candidates for rehabilitation ) means assigning each pipe to one of six possible priority groups. A second set of criteria, based on the concept of efficiency, is proposed for comparing alternative rehabilitation programs ( subsets of the asset stock ).     

The influence of raw material characteristics on the industrial pelletizing process and pellet quality

Industrial pelletizing of sawdust was carried out as a designed experiment in the factors: sawdust moisture content, fractions of fresh pine, stored pine and spruce. The process parameters and response variables were energy consumption, pellet flow rate, pellet bulk density, durability and moisture content. The final data consisted of twelve industrial scale runs. Because of the many response variables, data evaluation was by principal component analysis of a 12 × 9 data matrix. The two principal component model showed a clustering of samples, with a good reproducibility of the center points. It also showed a positive correlation of energy consumption, bulk density and durability all negatively correlated to flow rate and moisture content. The stored pine was more related to high durability and bulk density. The role of the spruce fraction was unclear. The design matrix, augmented with the process parameters was a 12 × 6 matrix. Partial least squares regression showed excellent results for pellet moisture content and bulk density. The model for durability was promising. A 12 × 21 data matrix of fatty- and resin acid concentrations measured by GC–MS showed the differences between fresh and stored pine very clearly. The influence of the spruce fraction was less clear. However, the influence of the fatty- and resin acids on the pelletizing process could not be confirmed, indicating that other differences between fresh and stored pine sawdust have to be investigated. This work shows that it is possible to design the pelletizing process for moderate energy consumption and high pellet quality.     

Forgotten pioneers of color order. Part I: Gaspard Grégoire (1751–1846)

Some 100 years before Albert Munsell developed his color order system, French silk merchant and inventor of a technology for producing works of art in silk velours, Gaspard Grégoire, introduced a color order system based on the color attributes hue, (relative) chroma, and lightness. Conceived in the mid‐1780s, an atlas with 1350 samples was produced before 1813 and found use in French Royal manufacturing operations and educational institutions. It was followed a few years later by one with 343 samples. Grégoire's work was subsequently overshadowed by Michel‐Eugene Chevreul's more complicated and less intuitive hemispherical system of 1839. © 2007 Wiley Periodicals, Inc. Col Res Appl, 33, 5–9, 2008