Monitoring the early-age hydration of self-compacting concrete using ultrasonic p-wave transmission and isothermal calorimetry

The early-age hydration (≤48 h) of a series of self-compacting concretes and corresponding mortars and one traditionally vibrated concrete and mortar is monitored in a continuous way using ultrasonic testing and isothermal calorimetry. The mixtures differ in type of mineral addition, superplasticizer, cement, cement-to-powder ratio and water-to-powder ratio. The influence of these different mixture compositions on the kinetics of the hydration during the first days of the hydration is characterized by the heat production rate q and the evolution of the p-wave velocity, which is a consequence of the microstructural changes. The variations in the acceleration caused by mineral additions and the deceleration caused by superplasticizers lead to a significantly different behavior. Separating the impact of each of the affecting factors is not always possible due to their combined actions. The nature of the acceleration due to limestone additions and the deceleration caused by polycarboxylate ether superplasticizers can be distinguished clearly, but cannot be quantified. The correlation between the ultrasonic and isothermal calorimetric results is investigated based on parameters related to the start and the end of the setting and reveals the meaningfulness of these parameters when assessing the hydration of self-compacting mixtures with continuous ultrasonic techniques.     

In situ fibrillation of polypropylene/polyamide 6 blends: Effect of organoclay addition

In situ fibrillation of PP/PA6 blends (85/15 wt %) is investigated in presence of two kinds of organically modified montmorillonite, differing by the polarity of their surfactant. The organoclay is primary dispersed either in the PP (for the low‐polarity Cloisite® 15A) or in the PA6 (for the high‐polarity Cloisite® 30B), according to its assumed affinity. In absence of organoclay, a fibrillar morphology is achieved after the melt‐blending and hot‐stretching step, as evidenced by SEM analysis. Upon clay addition, different morphological trends are evidenced. The C15A leads to a refinement of the fibrils whether the C30B induces a transition from fibrillar to nodular structure. These trends are ascribed to drastic changes in viscosity and elasticity ratios, due to the filler initial localization. Several techniques (DSC, STEM) point out a C15A migration from the PP to the PP/PA6 interface. Rheological measurements highlight the possibility of a double‐percolation phenomenon, linked to the fibrillar microstructure of the PP/PA6/C15A blend. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41680.     

Stimuli-accelerated polymeric drug delivery systems

The controlled delivery of active pharmaceutical ingredients to the site of disease represents a major challenge in drug therapy. Particularly when drugs have to be transported across biological barriers, suitable drug delivery systems are of importance. In recent years responsive delivery systems have been developed which enable a controlled drug release depending on internal or external stimuli such as changes in pH, redox environment or light and temperature. In some studies delivery systems with reactivity against two different stimuli were established either to enhance the response by synergies of the stimuli or to broaden the window of possible trigger events. In the present review numerous exciting developments of pH-, light- and redox-cleavable polymers suitable for the preparation of smart delivery systems are described. The review discusses the different stimuli that can be used for a controlled drug release of polymer-based delivery systems. It puts a focus on the different polymers described for the preparation of stimuli-sensitive systems, their preparation techniques as well as their stimuli-responsive degradation. © 2022 The Authors. Polymer International published by John Wiley & Sons Ltd on behalf of Society of Industrial Chemistry.     

Genesis of Microstructures in Friction Stir Welding of Ti-6Al-4V

This paper is focused on the genesis of microstructures in friction stir welding (FSW) of the Ti-6Al-4V alloy. Several titanium joints, initially prepared with four different preheat treatments, were processed by FSW. Detailed microstructural analyses were performed in order to investigate change in the microstructure during the process. In this work, the FSW processing allows a controlled and stable microstructure to be produced in the stirring zone, regardless of the initial heat treatment or the welding conditions. The welded material undergoes a severe thermomechanical treatment which can be divided into two steps. First, the friction in the shoulder and the plastic strain give rise to the necessary conditions to allow a continuous dynamic recrystallization of the β phase. This operation produces a fine and equiaxed β grain structure. Second, once the pin has moved away, the temperature decreases, and the material undergoes a heat treatment equivalent to air quenching. The material thus exhibits a β → β + α transformation with germination of a fine intergranular Widmanstätten phase within the ex-fully-recrystallized-β grains.     

Prediction of Response to Cisplatin-Based Neoadjuvant Chemotherapy of Muscle-Invasive Bladder Cancer Patients by Molecular Subtyping including KRT and FGFR Target Gene Assessment

Patients with muscle-invasive urothelial carcinoma achieving pathological complete response (pCR) upon neoadjuvant chemotherapy (NAC) have improved prognosis. Molecular subtypes of bladder cancer differ markedly regarding sensitivity to cisplatin-based chemotherapy and harbor FGFR treatment targets to various content. The objective of the present study was to evaluate whether preoperative assessment of molecular subtype as well as FGFR target gene expression is predictive for therapeutic outcome—rate of ypT0 status—to justify subsequent prospective validation within the “BladderBRIDGister”. Formalin-fixed paraffin-embedded (FFPE) tissue specimens from transurethral bladder tumor resections (TUR) prior to neoadjuvant chemotherapy and corresponding radical cystectomy samples after chemotherapy of 36 patients were retrospectively collected. RNA from FFPE tissues were extracted by commercial kits, Relative gene expression of subtyping markers (e.g., KRT5, KRT20) and target genes (FGFR1, FGFR3) was analyzed by standardized RT-qPCR systems (STRATIFYER Molecular Pathology GmbH, Cologne). Spearman correlation, Kruskal–Wallis, Mann–Whitney and sensitivity/specificity tests were performed by JMP 9.0.0 (SAS software). The neoadjuvant cohort consisted of 36 patients (median age: 69, male 83% vs. female 17%) with 92% of patients being node-negative during radical cystectomy after 1 to 4 cycles of NAC. When comparing pretreatment with post-treatment samples, the median expression of KRT20 dropped most significantly from DCT 37.38 to 30.65, which compares with a 128-fold decrease. The reduction in gene expression was modest for other luminal marker genes (GATA3 6.8-fold, ERBB2 6.3-fold). In contrast, FGFR1 mRNA expression increased from 33.28 to 35.88 (~6.8-fold increase). Spearman correlation revealed positive association of pretreatment KRT20 mRNA levels with achieving pCR (r = 0.3072: p = 0.0684), whereas pretreatment FGFR1 mRNA was associated with resistance to chemotherapy (r = −0.6418: p < 0.0001). Hierarchical clustering identified luminal tumors of high KRT20 mRNA expression being associated with high pCR rate (10/16; 63%), while the double-negative subgroup with high FGFR1 expression did not respond with pCR (0/9; 0%). Molecular subtyping distinguishes patients with high probability of response from tumors as resistant to neoadjuvant chemotherapy. Targeting FGFR1 in less-differentiated bladder cancer subgroups may sensitize tumors for adopted treatments or subsequent chemotherapy.     

Problematic internet use among older adolescents: A conceptual framework

Problematic internet use (PIU) is of growing significance to adolescent health, but lacks a strong conceptual framework to guide ongoing work. We used Concept Mapping methodology to construct a theoretical framework describing PIU. This validated approach includes five steps: preparation, generation (brainstorming), structuring (sort and rank), representation (statistical analysis) and interpretation (focus groups). Analysis included hierarchical cluster analysis over the overall square similarity matrix to determine a cluster map. A total of 193 college students participated in one or more phases of the study. Students were from 13 universities across 10 states, had an average age of 19.4 years (SD = 1.8), were 67% female and 77% Caucasian. A total of 20 health professionals participated. The seven clusters depicted on the PIU Concept Map include: psychosocial risk factors, physical impairment, emotional impairment, social/functional impairment, risky internet use, impulsive internet use and internet use dependence. The stress value for the fit of the multidimensional solution to the structuring data was 0.28, indicating adequate fit. The concept map may be used towards development of a future comprehensive model of PIU as well as scale development efforts.     

Large Photothermal Effect in Sub‐40 nm h‐BN Nanostructures Patterned Via High‐Resolution Ion Beam

The controlled nanoscale patterning of 2D materials is a promising approach for engineering the optoelectronic, thermal, and mechanical properties of these materials to achieve novel functionalities and devices. Herein, high‐resolution patterning of hexagonal boron nitride (h‐BN) is demonstrated via both helium and neon ion beams and an optimal dosage range for both ions that serve as a baseline for insulating 2D materials is identified. Through this nanofabrication approach, a grating with a 35 nm pitch, individual structure sizes down to 20 nm, and additional nanostructures created by patterning crystal step edges are demonstrated. Raman spectroscopy is used to study the defects induced by the ion beam patterning and is correlated to scanning probe microscopy. Photothermal and scanning near‐field optical microscopy measure the resulting near‐field absorption and scattering of the nanostructures. These measurements reveal a large photothermal expansion of nanostructured h‐BN that is dependent on the height to width aspect ratio of the nanostructures. This effect is attributed to the large anisotropy of the thermal expansion coefficients of h‐BN and the nanostructuring implemented. The photothermal expansion should be present in other van der Waals materials with large anisotropy and can lead to applications such as nanomechanical switches driven by light.     

Protective Effect of D-Panthenol in Rhabdomyolysis-Induced Acute Kidney Injury

We investigated the nephroprotective effect of D-panthenol in rhabdomyolysis-induced acute kidney injury (AKI). Adult male Wistar rats were injected with 50% glycerol solution to induce rhabdomyolysis. Animals with rhabdomyolysis were injected with D-panthenol (200 mg/kg) for 7 days. On day 8, we examined AKI markers, renal histology, antioxidant capacity, and protein glutathionylation in kidneys to uncover mechanisms of D-panthenol effects. Rhabdomyolysis kidneys were shown to have pathomorphological alterations (mononuclear infiltration, dilatation of tubules, and hyaline casts in Henle’s loops and collecting ducts). Activities of skeletal muscle damage markers (creatine kinase and lactate dehydrogenase) increased, myoglobinuria was observed, and creatinine, BUN, and pantetheinase activity in serum and urine rose. Signs of oxidative stress in the kidney tissue of rhabdomyolysis rats, increased levels of lipid peroxidation products, and activities of antioxidant enzymes (SOD, catalase, and glutathione peroxidase) were all alleviated by administration of D-panthenol. Its application improved kidney morphology and decreased AKI markers. Mechanisms of D-panthenol’s beneficial effects were associated with an increase in total coenzyme A levels, activity of Krebs cycle enzymes, and attenuation of protein glutathionylation. D-Panthenol protects kidneys from rhabdomyolysis-induced AKI through antioxidant effects, normalization of mitochondrial metabolism, and modulation of glutathione-dependent signaling.     

Psychedelic-Induced Serotonin 2A Receptor Downregulation Does Not Predict Swim Stress Coping in Mice

Serotoninergic psychedelics such as psilocybin have been reported to elicit a long-lasting reduction in depressive symptoms. Although the main target for serotoninergic psychedelics, serotonin type 2A receptor (5-HT_2A), has been established, the possible mechanism of the antidepressant action of psychedelics remains unknown. Using the mouse forced swim test model, we examined whether the administration of the synthetic serotoninergic psychedelic 2,5-dimethoxy-4-iodoamphetamine (DOI) would modulate 5-HT_2A receptor levels in the medial prefrontal cortex (mPFC) and revert stress-induced changes in behavior. Mice subjected to swim stress developed a passive stress-coping strategy when tested in the forced swim test 6 days later. This change in behavior was not associated with the hypothesized increase in 5-HT_2A receptor-dependent head twitch behaviors or consistent changes in 5-HT_2A receptor levels in the mPFC. When DOI was administered 1 day before the forced swim test, a low dose (0.2 mg/kg i.p.) unexpectedly increased immobility while a high dose (2 mg/kg i.p.) had no significant effect on immobility. Nevertheless, DOI evoked a dose-dependent decrease in 5-HT_2A levels in the mPFC of mice previously exposed to swim stress. Our findings do not support the hypothesis that the downregulation of 5-HT_2A receptors in the mPFC contributes to the antidepressant-like properties of serotoninergic psychedelics.     

Rather the Rule than the Exception: Non-Convex Pareto Sets and their Navigation in Distillation Processes

Novel algorithms for adaptive approximation and interactive navigation of Pareto sets are applied to various homogeneous distillation processes with recycle streams within an industrial flowsheet simulator. The adaptive approximation scheme shows that the Pareto set consists of both convex and non-convex regions when the product purities are maximised while minimising the total heat duties. It is illustrated how such Pareto sets can be navigated interactively using a ray tracing technique. Our results suggest that the occurrence of non-convex regions in the Pareto sets is due to recycle streams in the flowsheets and is therefore the rule rather than the exception in multi-objective optimisation of flowsheet simulations in chemical engineering.