Free convection heat transfer over a horizontal plate at low prandtl number

Boundary layer equations for free convection heat transfer along a semi-infinite horizontal plate are derived by giving more importance to the energy equation. The equations are obtained for low Prandtl number and two separate polynomials are used to approximate the temperature and velocity profiles in these regions. The rate of heat transfer is compared with the available analytical and numerical results based on conventional boundary layer equations.     

Thermal stability of PVC/chlororubber-20-graft polyblend–styrene–acrylonitrile blends. I

Thermal stability of PVC blends with chlororubber-20-graft polyblend-styrene-acrylonitrile [CR-20gp-SAN (2:1)] was studied by HCI evolution techniques and thermogravimetry under isothermal condition. The thermal stability of PVC/CR-20gp-SAN (2:1) blends has been compared with those of PVC/CR-20 and PVC/KM-365B blends. It has been observed that the thermal stability of modified PVC is less than that of unmodified PVC. The CR-20gp-SAN (2:1) modified PVC blends were found to be more stable than PVC/CR-20 blends but less stable than PVC/KM-365B blends. The rate of degradation in PVC blends were observed to be unaffected by the concentration of the modifiers, but the PVC/KM-365B blends were found to be degrading slower in comparison with PVC/CR-20 and PVC/CR-20gp-SAN (2:1) blends. The rate of degradation for PVC/CR-20 blends at lower concentrations (<10%) of modifiers is almost equal to that of PVC/CR-20-gp-SAN (2:1) blends, but more at higher concentrations of modifiers (>10%). The experimental results have been explained on the basis of the chemical nature of the modifiers and their miscibility with PVC.     

Note: The Use of Triallyl Cyanurate in Bonding PVC Plastisols to Steel

The use of diallyl phthalate as the basis for a non-extractable plasticizer for poly(vinylchloride) (PVC) is well-known. Used in conjunction with a primary plasticizer and a polymerization initiator, a plastisol coating for steel can be formulated which is oil or grease tolerant and can also be used for bonding some structural steel parts if the area is relatively large compared with the load to be applied. Defrayne and Twiss¹ describe the bonding of automobile hood assemblies by vinyl plastisol adhesives and Schneberger² emphasizes their use in the automobile industry though neither article gives the formulations employed. Commercial formulations giving pull-off strengths of the order of 1 to 4 MN. m^-2 always incorporate a proportion of a phenolformaldehyde resin or even an epoxy, but sound-deadening and other coatings of steel do not necessarily need this reinforcement. Phillips and Longworth³ particularly studied the use of diallylphthalate (DAP) as a polymerizable plasticizer and the consequent improvement in adhesion to mild steel. Sherlock⁴ used a simple formulation without additives when investigating the effect of surface cleaning and conversion coatings (oxides and phosphates). It was suggested that, as outlined below, improved adhesion would be expected if a small proportion of triallyl cyanurate (TAC) were added to the polymerizable plasticizer. This paper shows this expectation to be achieved although the proportion of the more expensive TAC needed for substantial increase in bond strength is greater than was hoped.     

Microstructure determination and thermal studies of n‐acryloylcarbazole/vinyl acetate copolymers

Copolymers of N‐acryloylcarbazole (A) and vinyl acetate (V) were synthesized by bulk polymerization using benzoyl peroxide (BPO) as free‐radical initiator at 65°C in different in‐feed ratios. The composition of the copolymer was determined by ¹H‐NMR spectrum. The comonomer reactivity ratios, determined by Kelen–Tudos (KT) and nonlinear error‐in‐variables (EVM) methods, were r_A= 16.75 ± 1.38, r_V = 0.015 ± 0.002, and r_A = 16.36, r_V = 0.015, respectively. Complete spectral assignments of the ¹H and ¹³C{¹H} NMR spectra of the copolymers were done by the help of distortionless enhancement by polarization transfer (DEPT) and two‐dimensional NMR techniques such as heteronuclear single quantum coherence (HSQC) and total correlation spectroscopy (TOCSY). The methine and methylene carbon resonances were found to be compositional as well as configurational sensitive. The signals obtained were broad pertaining to the restricted rotation of bulky carbazole group. The thermal stability and glass‐transition temperatures (T_g) of the copolymers were found to be dependant on polymer composition and characteristic of rotational rigidity of the polymer chain. Variation in the values of T_g with the copolymer composition was found to be in good agreement with theoretical values obtained from Johnston and Barton equations. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 2720–2733, 2007     

An electrochemical impedance spectroscopy and scanning electron microscopy study of the influence of positive plate compression on the electrochemical behaviour of lead-acid batteries

This study has developed an electrochemical impedance spectroscopy (EIS) method for the in situ investigation of the influence of positive plate compression on the electrochemical behaviour of lead-acid batteries during charge/discharge cycling. The EIS data for a fully charged and fully discharged battery are internally consistent with the expected kinetics of a battery in the opposite states of charge, and demonstrate that EIS measurements may be recorded with a high level of reproducibility. Furthermore, this study has necessitated the development of a special cell incorporating horizontally orientated battery plates that can be subjected to elevated pressure through the stacking of lead bricks on top of the cell, as well as a physically robust reference electrode system that can withstand the application of pressure. For this purpose, a platinum-wire pseudo-reference electrode has been developed, and has been shown to exhibit sufficient electrode stability over the period of an EIS recording, enabling the measurement of reproducible and meaningful EIS data. Additionally, the influence of positive plate compression on the behaviour of the lead-acid battery has been investigated by using scanning electron microscopy (SEM). Clearly, the experimental data show that plate compression enhances significantly the kinetics and concomitant performance of the lead-acid battery, and this is related to the enhanced reactivity of the active material, as rationalized by using the agglomeration-of-spheres (AOS) model.     

Antiandrogen and Antimicrobial Aspects of Coordination Compounds of Palladium(II), Platinum(II) and Lead(II)

Synthesis, characterization and antimicrobial activities of an interesting class of biologically potent macrocyclic complexes have been carried out. All the complexes have been evaluated for their antimicrobial effects on different species of pathogenic fungi and bacteria. The testicular sperm density, testicular sperm morphology, sperm motility, density of cauda epididymal spermatozoa and fertility in mating trails and biochemical parameters of reproductive organs have been examined and discussed. The resulting biologically active [M(MaL(n))(R(2))]Cl(2) and [Pb(MaL(n))(R(2))X(2)] (where, M = Pd(II) or Pt(II) and X = Cl or NO(3)) type of complexes have been synthesized by the reactions of macrocyclic ligands (MaL(n)) with metal salts and different diamines in 1:1:1 molar ratio in methanol. Initially the complexes were characterized by elemental analyses, molecular weight determinations and conductivity measurements. The mode of bonding was established on the basis of IR, (1)H NMR, (13)C NMR, (195)Pt NMR, (207)Pb NMR, XRD and electronic spectral studies. The macrocyclic ligand coordinates through the four azomethine nitrogen atoms which are bridged by benzil moieties. IR spectra suggest that the pyridine nitrogen is not coordinating. The palladium and platinum complexes exhibit tetracoordinated square-planar geometry, whereas a hexacoordinated octahedral geometry is suggested for lead complexes.     

Fertility Inhibitor Heterobimetallic Complexes of Platinum(II) and Palladium(II): Synthetic, Spectroscopic and Antimicrobial Aspects

Synthetic, spectroscopic and antimicrobial aspects of some fertility inhibitor heterobimetallic complexes have been carried out. These heterobimetallic chelates [M(C(5)H(5)N(3))(2)M(2)'(R)(4)]Cl(2) (M = Pd or Pt and M' = Si, Sn, Ti and Zr) have been successfully synthesinzed via the reaction of M(C(5)H(7)N(3))(2)Cl(2) with group four or fourteen dichlorides in 1:2 stoichiometric proportions. The products were characterized by elemental analyses, molecular weight determinations, magnetic susceptibility measurements, conductance, and IR multinuclear NMR and electronic spectral studies. A square planar geometry has been suggested for all the complexes with the help of spectral data. Conductivity data strongly suggest that chlorine atoms are ionic in nature due to which complexes behave as electrolytes. All the complexes have been evaluated for their antmicrobial effects on different species of pathogenic fungi and bacteria. The testicular sperm density, testicular sperm morphology, sperm motility, density of cauda epididymal spermatozoa and fertility in mating trails and biochemical parameters of reproductive organs have been examined and discussed.     

A discrete model for non-wetting liquid flow from a point source in a packed bed under the influence of gas flow

A study of non-wetting flow in a packed bed under the influence of gas flow has been carried out. Departing from the usual continuum models, a discrete and deterministic model for liquid flow has been presented to model the liquid flow from single and multiple point sources. Liquid flow is modelled based on force balance approach considering gas drag, bed resistance and gravity forces. Gas flow is modelled using k-ε model for turbulent flow. An X-ray flow visualization technique, developed by our group, is used to study the liquid flow paths in the packed bed. Liquid flow path and velocity has been obtained for various liquid and gas flow rate. Flow paths obtained from the simulation results are in good agreement to those obtained from flow visualization procedure under various conditions. Also, liquid distribution at the bed bottom is reported and compared with the experimental results.     

A class of discontinuous dynamical systems IV. A laboratory air-water system

An air-water experimental system consisting of two inlets and one outlet is constructed and characterised. It reaches the state of sliding mode, or equivalently, two phase slug flow. The linear hydraulic model proposed in the literature is adequate to describe it. Experimental data are used to tune this model. The resistance to the flow of air through the outlet valve during the two phase flow is much larger than that when air alone flows out. At the operating range, the resistance to water flow is not affected by the presence of air.     

Preparation of iodine containing quaternary amine methacrylate copolymers and their contact killing antimicrobial properties

A novel quaternary amine methacrylate monomer (QAMA) was synthesized by amination of dimethacrylate with piperazine followed by its quaternization using an alkyl iodide. Copolymerization of QAMA with 2‐hydroxyethyl methacrylate was carried out by free radical bulk polymerization technique at room temperature using ammonium persulfate and N,N,N′,N′‐tetramethyl ethylenediamine as a redox initiator. The monomer as well as copolymers was characterized by FTIR and ¹H NMR spectral studies. Thermal and physical characteristics of copolymers of varying compositions of QAMA were evaluated by thermogravimetric analysis, differential calorimetry, contact angle and scanning electron microscopy. The antibacterial activity of the synthesized quaternary amine dimethacrylate copolymers against Escherichia coli and Staphylococcus aureus was studied by zone of inhibition and colony count method. QAMA copolymers showed broad‐spectrum contact killing antibacterial properties without releasing any active agent as checked by iodide‐selective ion meter. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 1038–1044, 2006