A high accuracy reactive power and reactive energy meter

Contents A high accuracy instrument for reactive power and reactive energy measurements in a single phase power network is described in the paper. The measurement principle is in accordance with IEC recommendation. Test results show that in the range of 1 to 100% of the input current the accuracy of the meter is better than 100 ppm for frequency variations of ±5% around the nominal frequency. The instrument could be used as a single-phase reactive power and reactive energy standard. A three phase version of the instrument could be used as a standard or as a revenue meter because of its high accuracy, simple design and anticipated low cost.

---

Ein Meßgerät höher Präzision zur Blindleistungs- und Blindverbrauchsmessung

Übersicht In diesem Artikel wird ein Meßgerätu zur Blindleistungs- und Blindenergiemessung in Einphasen-Wechselstromnetzen beschrieben. Das Meßprinzip stimmt mit der Vorschrift der IEC überein. Die Meßergebnisse zeigen, daß im Bereich von 1 bis 100% des Eingangsstroms bei Frequenzvariationen von ±5% von der Nennfrequenz die Meßfehler des Gerätes kleiner als 0.01% sind. Das Meßgerät könnte als ein Normal für Blindleistungs- und Blindenergievergleichsmessungen in Einphasensystemen verwendet werden. Eine Dreiphasenversion dieses Meßgerätes könnte wegen seiner hohen Genauigkeit und des einfachen und preiswerten Aufbaus als ein Normal oder als Verbrauchsmeßgerät für die Kostenberechnung benutzt werden.

---

---

Institute for National Measurement Standards, National Research Council     

Dynamic programming based multi-stage optimization of shunt capacitors in radial distribution systems

Contents In this paper, a new optimal procedure of the general compensation problem is proposed, by minimizing the performance criterion depending on both active power and energy losses, and by taking into account cost of shunt capacitor banks and system voltage constraints. The new solution method represents a combinatorial searching procedure, with non-differentiable optimization criterion, by using the multi-stage optimization based on dynamic programming. The applications of the method to three different test system have shown important improvements in the sense of speed and effectiveness of calculations, when compared to previously advertised solution methods.

---

Mehrstufige Optimierung der Parallelkondensatoren in radialen Verteilungsnetzen mittels dynamisch Programmierung

Übersicht In diesem Artikel wird ein neues Verfahren für die allgemeine Blindleistungkompensation vrgestellt. Das Verfahren basiert auf der Minimierung der Optimalitätsbedingung, die Funktion der Wirkleistung und der Energieverluste ist. Die Kosten der Kondensatorbänke und die Betriebsgrenzen der Netzspannungen werden auch berücksichtigt. Die neue Methode stellt ein kombinatorisches Suchverfahren mit nicht-diffenzierbarer Optimalitätsbedingung dar. Dabei wird die mehrstufige Optimierung verwendet die auf der dynamischen Programmierung basiert. Die Bewertung der Methode mittels dreier Testnetze zeigt wichtige Verbesserungen bezüglich Schnelligkeit und Güte der Berechnung, im Vergleich zur früher veröffentlichten Methoden.

     

Improvements in data reduction in direct pulse heating calorimetry

This paper describes improvements introduced in data reduction in direct heating pulse specific heat experiments. In calculations of specific heat, it is necessary to calculate the first derivative of the recorded temperature data as a function of time. The error induced by different numerical differentiation techniques can represent a significant part of the overall measurement error. Thus, different digital filtering techniques, differentiation, and smoothing algorithms were applied and tested to examine their influence on the minimization of errors induced by noise, which is unavoidable in measured signals. A minimum square error criterion was applied in designing digital filters, with arbitrary prescribed magnitude characteristics. Attention was paid to applications when one or more structural phase transitions in the specimen material occur within the temperature range covered by the experiment. The cases where the frequency spectrum of induced noise overlaps with the spectrum of temperature transient signals originating from phase transitions were analyzed in detail. The effectiveness of the methods of extracting the final specific heat data from a noisy signal using different digital filtering techniques is demonstrated.Paper presented at the Fourth International Workshop on Subsecond Thermophysics, June 27–29, 1995, Köln, Germany.     

Nodes on ropes: a comprehensive data and control flow for steering ensemble simulations

Flood disasters are the most common natural risk and tremendous efforts are spent to improve their simulation and management. However, simulation-based investigation of actions that can be taken in case of flood emergencies is rarely done. This is in part due to the lack of a comprehensive framework which integrates and facilitates these efforts. In this paper, we tackle several problems which are related to steering a flood simulation. One issue is related to uncertainty. We need to account for uncertain knowledge about the environment, such as levee-breach locations. Furthermore, the steering process has to reveal how these uncertainties in the boundary conditions affect the confidence in the simulation outcome. Another important problem is that the simulation setup is often hidden in a black-box. We expose system internals and show that simulation steering can be comprehensible at the same time. This is important because the domain expert needs to be able to modify the simulation setup in order to include local knowledge and experience. In the proposed solution, users steer parameter studies through the World Lines interface to account for input uncertainties. The transport of steering information to the underlying data-flow components is handled by a novel meta-flow. The meta-flow is an extension to a standard data-flow network, comprising additional nodes and ropes to abstract parameter control. The meta-flow has a visual representation to inform the user about which control operations happen. Finally, we present the idea to use the data-flow diagram itself for visualizing steering information and simulation results. We discuss a case-study in collaboration with a domain expert who proposes different actions to protect a virtual city from imminent flooding. The key to choosing the best response strategy is the ability to compare different regions of the parameter space while retaining an understanding of what is happening inside the data-flow system.     

Extending applications using an advanced approach to DLL injection and API hooking

When programmers need to modify third‐party applications, they frequently do not have access to their source code. In such cases, DLL injection and API hooking are techniques that can be used to modify applications without intervening into their source code. The commonly used varieties of injection and hooking approaches have many practical limitations: they are inconvenient for a programmer to implement, do not work reliably in conjunction with all applications and with certain low‐level machine instructions. In this paper we present two novel approaches to DLL injection and API hooking, which we call Debugger‐aided DLL injection and Single Instruction Hooking. Our approaches overcome the limitations of the state‐of‐the art approaches. Despite incurring greater execution times, our approach allows extending of the applications in situations where the comparable approaches fail. As such, it has a notable practical value for beneficial practical applications of injection and hooking approaches, which are present in malware detection programs and computer security tools. Copyright © 2010 John Wiley & Sons, Ltd.     

An intelligent hybrid system for surface coal mine safety analysis

Analysis of safety in surface coal mines represents a very complex process. Published studies on mine safety analysis are usually based on research related to accidents statistics and hazard identification with risk assessment within the mining industry. Discussion in this paper is focused on the application of AI methods in the analysis of safety in mining environment. Complexity of the subject matter requires a high level of expert knowledge and great experience. The solution was found in the creation of a hybrid system PROTECTOR, whose knowledge base represents a formalization of the expert knowledge in the mine safety field. The main goal of the system is the estimation of mining environment as one of the significant components of general safety state in a mine. This global goal is subdivided into a hierarchical structure of subgoals where each subgoal can be viewed as the estimation of a set of parameters (gas, dust, climate, noise, vibration, illumination, geotechnical hazard) which determine the general mine safety state and category of hazard in mining environment. Both the hybrid nature of the system and the possibilities it offers are illustrated through a case study using field data related to an existing Serbian surface coal mine.     

Adsorption–desorption noise in plasmonic chemical/biological sensors for multiple analyte environment

We investigated intrinsic noise in plasmonic sensors caused by adsorption and desorption of gaseous analytes on the sensor surface. We analyzed a general situation when there is a larger number of different analyte species. We applied our model to calculate various analyte mixtures, including some environmental pollutants, toxic and dangerous substances. The spectral density of mean square refractive index fluctuations follows a dependence similar to that of generation-recombination noise in photodetectors, flat at lower frequencies and sharply decreasing at higher. Some of the calculated noise levels are well within the detection range of conventional surface plasmon resonance sensors. An AD noise peak is observed in temperature dependence of mean square refractive index fluctuations, thus sensor operating temperature may be optimized to obtain larger signal to noise ratio. A significant property of AD noise is its rise with the decreasing plasmon sensor area, which means that it will be even more pronounced in modern nanoplasmonic devices. Our consideration is valid both for conventional surface plasmon resonance devices and for general nanoplasmonic devices.