光源与物体色显现关系的仿真技术探讨

本文提出一种“利用原色漂移量调整法”确定当物体光谱反射率未知时光源与物体色显色关系。 利用该关系，通过微机真彩色数字图象技术对光环境进行仿真模拟。     

双噁唑啉化合物对PBT的增粘作用

以２．２＇－双（２－唑啉）和双（２－唑啉基）苯作扩链剂，用焙融挤出的方法，对聚对苯二甲酸丁二酯（ＰＢＴ）进行扩链，考察扩链剂的用量、反应时间和反应温度对ＰＢＴ的特性粘度及端羧基含量（ＣＶ）的影响。结果表明，当用２，２＇－双（２－唑啉）作扩链剂时，ＰＢＴ的特性粘度［η］从０．７９９提高到０．９２６ｄＬ／ｇ，ＣＶ降至５ｅｑ／１０￣６ｇ以下；当用双（２－　唑啉基）苯作扩链剂，［η］从０．７６３增至０．９２５ｄＬ／ｇ，ＣＶ降至１０ｅｑ／１０￣６ｇ以下，达到了较满意的扩链效果。     

Influence of Intraperitoneal Injection of Rare Earth Compounds on the Activities of Antioxidant Enzymes and the Level of Lipid Peroxidation in Mice Livers

ＩｎｆｌｕｅｎｃｅｏｆＩｎｔｒａｐｅｒｉｔｏｎｅａｌＩｎｊｅｃｔｉｏｎｏｆＲａｒｅＥａｒｔｈＣｏｍｐｏｕｎｄｓｏｎｔｈｅＡｃｔｉｖｉｔｉｅｓｏｆＡｎｔｉｏｘｉｄａｎｔＥｎｚｙｍｅｓａｎｄｔｈｅＬｅｖｅｌｏｆＬｉｐｉｄＰｅｒｏｘｉｄａｔｉｏｎｉｎＭｉｃ...     

TTP/C协议的关键特性研究

数据总线是构建分布式实时容错系统的关键技术之一,而基于TTA架构定义的TTP/C协议是面向安全关键领域的最新总线规范;首先介绍了TTP/C协议的基本架构和运行机制,然后深入研究了基于Welch-Lynch算法的分布式容错同步时钟、基于GMP的容错一致性策略和上电启动过程等TTP/C协议的关键特性;研究结果表明TTP/C协议具有严格的时间确定性和完备的容错策略,十分适合作为航空、汽车、铁路等安全关键领域的通用底层解决方案。     

浅析高职院校智能排课系统的设计

高校教学管理信息化是高校教育信息管理现代化的基础及关键,而其中排课工作是教学管理信息化过程中的一项重要且繁杂的基础性工作,其实质是具体的落实教学活动。本文介绍了高职院校教学管理系统的排课功能模块设计,重点论述了智能排课子系统的分析和设计,目的是为了开发出一套适合高职院校实际情况的网络教学管理系统。     

项目部合作开发报表系统

结合项目部合作开发报表生成及查询的实际需要,按照公司报表系统通用要求,全力开发易操作且高效率的报表系统。详细阐述报表系统所应用的软硬件环境、系统特点、系统操作说明及在实际工作中应用的优点综述。     

Parallel Algorithms for Image Template Matching on Hypercube SIMD Computers

This correspondence presents several parallel algorithms for image template matching on an SIMD array processor with a hypercube interconnection network. For an N by N image and an M by M window, the time complexity is reduced from O(N2M2) for the serial algorithm to O(M2/K2 + M * log2 N/K + log2 N * log2 K) for the N2K2-PE system (1 ? K ? M), or to O(N2M2/L2) for the L2-PE system (L ? N). With efficient use of the inter-PE communication network, each PE requires only a small local memory, many unnecessary data transmissions are eliminated, and the time complexity is greatly reduced.     

惩罚函数结合遗传算法的PID参数优化

针对传统优化算法对PID参数优化时,由于目标函数选择不当出现的超调量过大,从而引起系统的反应速度变慢和稳定性变差的问题,提出以传统遗传算法为基础,引入惩罚函数的方法,根据系统中出现的超调量来构造新的目标函数实现对PID的参数优化。实验表明,该方法可以有效减少系统中的超调量,加快优化以及运行速度的同时保证系统的稳定性,实现对PID参数的优化。     

Improved electric insulation ability and ferromagnetic property in Nb2O5 doped BiFeO3-based multiferroic ceramics

Journal of Electroceramics - 0.675BiFeO3-0.3BaTiO3-0.025LaFeO3-x mol% Nb2O5 (x?=?0–1.25) multiferroic lead- free ceramics, fabricated by conventional solid-state reaction, were...     

PAN/FPU Composite Nanofiber Membrane with Superhydrophobic and Superoleophobic Surface as a Filter Element for High-Efficiency Protective Masks

Recently, because of the outbreak of COVID-19, the demand for various types of filter elements in protective materials has increased globally. Furthermore, new requirements for the filtration performance of PM2.5 liquid (oil) particles have been put forward. In this work, Superhydrophobic and superoleophobic composite nanofibers with excellent filtration capacity for oil and salt particles are developed through the modification of polyacrylonitrile (PAN) by fluoro-polyurethane (FPU) doping. The results show that the PAN/FPU composite nanofibers doped with 9 wt% FPU has a uniform fiber morphology with a diameter of 240 ± 30 nm. Compared to the pure PAN nanofibers, the water-based contact angle of PAN/FPU increases from 90 ± 5° to 151 ± 5°, and the oil-based contact angle increases from 58 ± 2° to 152 ± 3°. Importantly, at a high flow rate of 95 L min⁻¹, the filtration efficiency of the PAN/FPU nanofiber membrane for 0.3 µm oil particles increases from 92 ± 1% to 99.2 ± 0.1%. After cyclic loading, the filtration efficiency of 0.3 µm oil particles remains above 98%. Meanwhile, the filtration efficiency for 0.3 µm salt particles remains at 98.23 ± 0.1%. The PAN/FPU nanofiber membrane developed in this work is effective in applications and has good market prospects as a protective filtration material.