ANN–supported control strategy for a solid oxide fuel cell working on demand for a public utility building

The idea of control strategy of SOFC operating to meet demand of a public utility building was presented. The strategy was formulated with the support of Artificial Neural Network. The network was used to predict the demand for electricity. The calculations were carried out on the example of a building of the Institute of Heat Engineering Warsaw University of Technology. The control strategy is influenced by various factors depending on changes in market conditions and operating characteristics of the cell. We can define different objective functions eg: working for own needs, for maximum profit and maximum service life. The article presents a simulation of SOFC operation for demand profile of the IHE building from the selected time period.     

Magnetron-sputtered cobalt-based protective coatings on ferritic steels for solid oxide fuel cell interconnect applications

Co, Co–Mn (67:33 at.%) and Co–Cu (67:33 at.%) coatings were fabricated using magnetron sputtering on two kinds of ferritic stainless steels (Crofer22APU and F17TNb) in order to form spinel protective coatings on metallic interconnects for solid oxide fuel cells. Despite the thickness unevenness at different regions, dense metallic coatings were successfully applied onto all necessary surfaces of the channelled interconnect substrates. Upon oxidation, spinel oxide coatings with very low Cr content were formed, reducing effectively the Cr release. Among the three protective coatings, Co–Cu coating showed the lowest area specific resistance (<15 mΩ cm² at 800 °C).     

Preparation of scratch resistant superhydrophobic hybrid coatings by sol–gel process

Organic–inorganic hybrid coatings on glass substrates with superhydrophobic properties and with improved scratch resistance were obtained by means of applying a multilayer approach including multiple sol–gel processes. The coatings exhibited a water contact angle (WCA) higher than 150°. Ultraviolet (UV)-curable vinyl ester resins and vinyltriethoxysilane (VTEOS) as coupling agent were employed to increase the adhesion between substrate and the inorganic layers. The surfaces were characterized by means of dynamic contact angle and roughness measurements. Indeed, the occurrence of superhydrophobic behavior was observed. The scratch resistance of the hybrid coatings was tested to evaluate the adhesion of the coatings to the glass substrate. The proposed preparation method for scratch resistant, mechanically stable, superhydrophobic coatings is simple and can be applied on large areas of different kinds of substrates.     

Impact of neurite alignment on organelle motion

Intracellular transport is pivotal for cell growth and survival. Malfunctions in this process have been associated with devastating neurodegenerative diseases, highlighting the need for a deeper understanding of the mechanisms involved. Here, we use an experimental methodology that leads neurites of differentiated PC12 cells into either one of two configurations: a one-dimensional configuration, where the neurites align along lines, or a two-dimensional configuration, where the neurites adopt a random orientation and shape on a flat substrate. We subsequently monitored the motion of functional organelles, the lysosomes, inside the neurites. Implementing a time-resolved analysis of the mean-squared displacement, we quantitatively characterized distinct motion modes of the lysosomes. Our results indicate that neurite alignment gives rise to faster diffusive and super-diffusive lysosomal motion than the situation in which the neurites are randomly oriented. After inducing lysosome swelling through an osmotic challenge by sucrose, we confirmed the predicted slowdown in diffusive mobility. Surprisingly, we found that the swelling-induced mobility change affected each of the (sub-/super-)diffusive motion modes differently and depended on the alignment configuration of the neurites. Our findings imply that intracellular transport is significantly and robustly dependent on cell morphology, which might in part be controlled by the extracellular matrix.     

Mining the Wheat Grain Proteome

Bread wheat is the most widely cultivated crop worldwide, used in the production of food products and a feed source for animals. Selection tools that can be applied early in the breeding cycle are needed to accelerate genetic gain for increased wheat production while maintaining or improving grain quality if demand from human population growth is to be fulfilled. Proteomics screening assays of wheat flour can assist breeders to select the best performing breeding lines and discard the worst lines. In this study, we optimised a robust LC–MS shotgun quantitative proteomics method to screen thousands of wheat genotypes. Using 6 cultivars and 4 replicates, we tested 3 resuspension ratios (50, 25, and 17 µL/mg), 2 extraction buffers (with urea or guanidine-hydrochloride), 3 sets of proteases (chymotrypsin, Glu-C, and trypsin/Lys-C), and multiple LC settings. Protein identifications by LC–MS/MS were used to select the best parameters. A total 8738 wheat proteins were identified. The best method was validated on an independent set of 96 cultivars and peptides quantities were normalised using sample weights, an internal standard, and quality controls. Data mining tools found particularly useful to explore the flour proteome are presented (UniProt Retrieve/ID mapping tool, KEGG, AgriGO, REVIGO, and Pathway Tools).     

Growth and exopolysaccharide yield of Lactobacillus delbrueckii ssp. bulgaricus DSM 20081 in batch and continuous bioreactor experiments at constant pH

Some Lactobacillus delbrueckii ssp. bulgaricus strains are able to synthesize exopolysaccharides (EPS) and are therefore highly important for the dairy industry as starter cultures. The aim of this study was to investigate the nutritional requirements for growth and EPS production of Lactobacillus delbrueckii ssp. bulgaricus DSM 20081. A medium was developed from a semi-defined medium (SDM) in which glucose was replaced by lactose and different combinations of supplements (nucleobases, vitamins, salts, sodium formate and orotic acid) were added. Constant pH batch fermentation with the modified medium resulted in an EPS yield of approximately 210 mg glucose equivalents per liter medium. This was a 10-fold increase over flask cultivation of this strain in SDM. Although not affecting cell growth, the mixture of salts enhanced the EPS synthesis. Whereas EPS production was approximately 12 mg/g dry biomass without salt supplementation, a significantly higher yield (approximately 20 mg/g dry biomass) was observed after adding the salt mixture. In continuous fermentation, a maximal EPS concentration was obtained at a dilution rate of 0.31/h (80 mg EPS/L), which corresponded to a specific EPS production of 49 mg/g dry biomass.     

The influence of protein–flavonoid interactions on protein digestibility in vitro and the antioxidant quality of breads enriched with onion skin

Different types of breads enriched with onion skin were studied. The objectives were twofold: to show and examine protein–phenolic interactions and to discuss results concerning phenolic content, antioxidant activity and protein digestibility in the light of in vitro bioaccessibility. Phenolic contents and antiradical abilities were linked with the level of onion skin supplement however, the amounts determined were significantly lower than expected. Fortification influenced protein digestibility (a reduction from 78.4% for control breads to 55% for breads with a 4% supplement). Electrophoretic and chromatographic studies showed the presence of indigestible protein–flavonoid complexes – with molecular weights about 25 kDa and 14.5 kDa; however, the reduction of free amino group levels and the increase in chromatogram areas suggest that flavonoids also bind to other bread proteins. The interaction of phenolics with proteins affects antioxidant efficacy and protein digestibility; thus, they have multiple effects on food quality and pro-health properties.     

Higher order vibrations of thin periodic plates

A problem of higher order vibrations of thin periodic plates related to a plate periodicity is discussed. The applied model, based on the Kirchhoff plate theory assumptions and additional hypothesis of tolerance averaging [Wo?niak Cz, Wierzbicki E. Averaging techniques in thermomechanics of composite solids. Tolerance averaging versus homogenization. Poland, Cz?stochowa: Cz?stochowa University of Technology; 2000], makes it possible to take into account the effect of the periodicity cell size on the overall plate behaviour. Assuming more functions describing oscillations of the periodicity cell, we can investigate within the model not only fundamental vibrations but also higher order vibrations related to a periodic plate structure. These functions have to be properly chosen approximations of solutions to eigenvalue problem for natural vibrations of separated cell with periodic boundary conditions, [J?drysiak J. On vibrations of thin plates with one-dimensional periodic structure. Int J Eng Sci 2000;38:2023-2043]. Using the known two-dimensional plate models—the orthotropic plate model and finite element method as well as the discrete model, certain justifications of the proposed model are made.