侧吹气流方向对大功率CO2激光焊缝成形的影响

激光深熔焊过程中会在熔池上方产生等离子体云，若该等离子体云过密，将降低激光入射到工件表面能量密度。在工业应用中，常采用侧吹辅助气体来减弱等离子体云的影响。本文通过试验，研究了在不同气体流量下，侧吹气体方向不同对焊接过程稳定性和焊缝成形的影响。结果发现：使用大功率CO2激光焊接AH32时。侧吹气体方向对焊缝成形有着明显的影响。从熔池和等离子体两个方面，解释了侧吹气体方向的影响机制。     

The Course Thicknesses of the Great Pyramid

Eight sets of course thicknesses for the Great Pyramid are combined into one for an improved estimate of each course’s thickness and a smaller standard error than was possible before. It is found that the cubit, palm and finger were used in setting the thicknesses of the courses. Three simple patterns—slopes, ramps and flats—were used when setting the thicknesses along with some exceptions. We do not understand why this was done only that it was. This suggests a higher level of intention during the design process than was previously thought.     

A versatile facility for laboratory studies of viscoelastic and poroelastic behaviour of rocks

Novel laboratory equipment has been modified to allow both torsional and flexural oscillation measurements at sub-microstrain amplitudes, thereby providing seismic-frequency constraints on both the shear and compressional wave properties of cylindrical rock specimens within the linear regime. The new flexural mode capability has been tested on experimental assemblies containing fused silica control specimens. Close consistency between the experimental data and the results of numerical modelling with both finite-difference and finite-element methods demonstrates the viability of the new technique. The capability to perform such measurements under conditions of independently controlled confining and pore-fluid pressure, with emerging strategies for distinguishing between local (squirt) and global (specimen-wide) fluid flow, will have particular application to the study of frequency-dependent seismic properties expected of cracked and fluid-saturated rocks of the Earth's upper crust.     

Considerations for linking seatpan and backrest angles

Modern ergonomic chairs typically have several dimensions that can be adjusted independently of one another. Finding a desirable setting for any one dimension can depend on how other dimensions are set, thereby confronting users with a significant control problem. One design strategy for dealing with this problem has been to link changes in seatpan and backrest angles in some ratio, such that a one‐degree change in seatpan angle is associated with a two‐ or three‐degree change in backrest angle. However, there is no evidence to justify the choice of a particular ratio. This article presents data that addresses this issue. Subjects, performing either an entry or verification task, could adjust the chair to any position. Backrest and seatpan angles were plotted over time and analyzed using both graphical and statistical methods. The resulting scatter plots do not support the industry standard, 1:2 or 1:3 ratio, of changes in seatpan to backrest angles. The possibility of a variable linkage is discussed; however, problems associated with such a solution raise the possibility that control issues might be best addressed through training and exploration.     

Non-Pauli observables for CWS codes

It is known that nonadditive quantum codes can have higher code dimensions than stabilizer codes for the same length and minimum distance. The class of codeword stabilized codes (CWS) provides tools to obtain new nonadditive quantum codes by reducing the problem to finding nonlinear classical codes. In this work, we establish some results on the kind of non-Pauli operators that can be used as observables in the decoding scheme of CWS codes and propose a procedure to obtain those observables.     

Validation of GOES and MODIS active fire detection products using ASTER and ETM+ data

In this study we implemented a comprehensive analysis to validate the MODIS and GOES satellite active fire detection products (MOD14 and WFABBA, respectively) and characterize their major sources of omission and commission errors which have important implications for a large community of fire data users. Our analyses were primarily based on the use of 30 m resolution ASTER and ETM+ imagery as our validation data. We found that at the 50% true positive detection probability mark, WFABBA requires four times more active fire area than is necessary for MOD14 to achieve the same probability of detection, despite the 16× factor separating the nominal spatial resolutions of the two products. Approximately 75% and 95% of all fires sampled were omitted by the MOD14 and WFABBA instantaneous products, respectively; whereas an omission error of 38% was obtained for WFABBA when considering the 30-minute interval of the GOES data. Commission errors for MOD14 and WFABBA were found to be similar and highly dependent on the vegetation conditions of the areas imaged, with the larger commission errors (approximately 35%) estimated over regions of active deforestation. Nonetheless, the vast majority (> 80%) of the commission errors were indeed associated with recent burning activity where scars could be visually confirmed in the higher resolution data. Differences in thermal dynamics of vegetated and non-vegetated areas were found to produce a reduction of approximately 50% in the commission errors estimated towards the hours of maximum fire activity (i.e., early-afternoon hours) which coincided with the MODIS/Aqua overpass. Lastly, we demonstrate the potential use of temporal metrics applied to the mid-infrared bands of MODIS and GOES data to reduce the commission errors found with the validation analyses.     

Model driven middleware: A new paradigm for developing distributed real-time and embedded systems

Distributed real-time and embedded (DRE) systems have become critical in domains such as avionics (e.g., flight mission computers), telecommunications (e.g., wireless phone services), tele-medicine (e.g., robotic surgery), and defense applications (e.g., total ship computing environments). These types of system are increasingly interconnected via wireless and wireline networks to form systems of systems. A challenging requirement for these DRE systems involves supporting a diverse set of quality of service (QoS) properties, such as predictable latency/jitter, throughput guarantees, scalability, 24x7 availability, dependability, and security that must be satisfied simultaneously in real-time. Although increasing portions of DRE systems are based on QoS-enabled commercial-off-the-shelf (COTS) hardware and software components, the complexity of managing long lifecycles (often ∼15-30 years) remains a key challenge for DRE developers and system integrators. For example, substantial time and effort is spent retrofitting DRE applications when the underlying COTS technology infrastructure changes.This paper provides two contributions that help improve the development, validation, and integration of DRE systems throughout their lifecycles. First, we illustrate the challenges in creating and deploying QoS-enabled component middleware-based DRE applications and describe our approach to resolving these challenges based on a new software paradigm called Model Driven Middleware (MDM), which combines model-based software development techniques with QoS-enabled component middleware to address key challenges faced by developers of DRE systems — particularly composition, integration, and assured QoS for end-to-end operations. Second, we describe the structure and functionality of CoSMIC (Component Synthesis using Model Integrated Computing), which is an MDM toolsuite that addresses key DRE application and middleware lifecycle challenges, including partitioning the components to use distributed resources effectively, validating software configurations, assuring multiple simultaneous QoS properties in real-time, and safeguarding against rapidly changing technology.     

Internet addiction: Meta-synthesis of qualitative research for the decade 1996–2006

Internet addiction is “an individual’s inability to control their Internet use, which in turn leads to feelings of distress and functional impairment of daily activities” [Shapira, N., Lessig, M., Goldsmith, T., Szabo, S., Lazoritz, M., Gold, M. et al. (2003). Problematic Internet use: Proposed classification and diagnostic criteria. Depression and Anxiety, 17(4), 207–216]. Previous research in this field has offered inconclusive data on whether Internet addiction can be classified as a disorder. This study provides an in-depth and comprehensive analysis of internet addiction through a meta-synthesis of qualitative studies on excessive Internet use published during the period of 1996–2006. Several constructs pertaining to the domain of Internet addiction have been identified and a theoretical model of Internet addiction has been proposed.     

Hierarchical control of multiple resources in distributed real-time and embedded systems

Real-time and embedded systems have traditionally been designed for closed environments where operating conditions, input workloads, and resource availability are known a priori, and are subject to little or no change at runtime. There is increasing demand, however, for adaptive capabilities in distributed real-time and embedded (DRE) systems that execute in open environments where system operational conditions, input workload, and resource availability cannot be characterized accurately a priori. A challenging problem faced by researchers and developers of such systems is devising effective adaptive resource management strategies that can meet end-to-end quality of service (QoS) requirements of applications. To address key resource management challenges of open DRE systems, this paper presents the Hierarchical Distributed Resource-management Architecture (HiDRA), which provides adaptive resource management using control techniques that adapt to workload fluctuations and resource availability for both bandwidth and processor utilization simultaneously. This paper presents three contributions to research in adaptive resource management for DRE systems. First, we describe the structure and functionality of HiDRA. Second, we present an analytical model of HiDRA that formalizes its control-theoretic behavior and presents analytical assurance of system performance. Third, we evaluate the performance of HiDRA via experiments on a representative DRE system that performs real-time distributed target tracking. Our analytical and empirical results indicate that HiDRA yields predictable, stable, and efficient system performance, even in the face of changing workload and resource availability.