Influence of deposition parameters on hole mobility in polymorphous silicon

Time-of-flight transient photoconductivity measurements reveal a monotonic increase with the deposition pressure in the hole mobility in polymorphous silicon for samples deposited under hydrogen dilution. With helium dilution, a maximum mobility that matches the highest value from H-dilution samples is measured at the intermediate pressure of 1.4 Torr. The deposition rate of those samples is twice the rate for the H-dilution ones. For the samples with the best hole mobilities, the valence-band tail is comparable to the one of standard hydrogenated amorphous silicon.     

Phase method for monitoring the permittivity of different media

A nondestructive method was developed for rapidly monitoring the permittivities of solid, liquid, and gaseous materials, based on measuring the phase difference of signals passing along two transmission lines and comparing the parameters of the “standard” and “investigated” media. The design of a volume-integral microwave transducer is considered together with its operating principle and its range of application. Translated from Izmeritel'naya Tekhnika, No. 4, pp. 53–55, April, 1996.     

Subsecond thermophysics research at the Boris Kidrich Institute Vincha

In the early eighties, at the Boris Kidrich Institute Vincha, a method for measuring specific heat and electrical resistivity of electrical conductors in the millisecond resolution range was developed for measurements from room temperature to 1900 K. Over a period of nearly 10 years, the method was applied to different materials, including pure metals, ferrous, and nickel/ chromium alloys, and to the characterization of candidate materials for thermophysical property reference standards. This paper describes the method and reviews the results obtained in specific heat and electrical resistivity studies of ferromagnetic and other materials. The paper also demonstrates capabilities of the method for describing phase transitions or anomalies in pure metals (Fe, Co, Ni) or alloys (Nichrome, austenitic stainless steel).Paper presented at the Second Workshop on Subsecond Thermophysics, September 20–21, 1990, Torino, Italy.     

Application of substituted N-arylpyrroles in the corrosion protection of aluminium in hydrochloric acid

The inhibiting action of N-arylpyrroles on aluminium in 0.17 mol dm^–3 hydrochloric acid solution, in the temperature range 20–60 °C, was studied using potentiodynamic and electrochemical impedence spectroscopy techniques. The inhibiting efficiency of both investigated compounds 1-(2-fluorophenyl)-2,5-dimethylpyrrole (compound A) and 1-(2-fluorophenyl)-2,5-dimethylpyrrole-3-carbaldehyde (compound B) slightly increases with increasing temperature of the corrosive solution. Inhibitor adsorption on the elecrode surface decreases the apparent activation energy of the hydrogen evolution reaction. Compound A follows the Temkin adsorption isotherm, while its carbaldehyde derivative follows the Langmuir isotherm. The results of the apparent energy of activation and the standard free energy of adsorption point to stronger chemisorption of the compound A. However, due to additional condensation of molecules with carbaldehyde groups on the electrode surface, the carbaldehyde derivative exhibits even better inhibiting efficiency than compound A. The kinetic corrosion parameters, analysed in terms of the impedance data, show a satisfactory agreement with those obtained by the potentiodynamic method.     

On some interval methods for algebraic,exponential and trigonometric polynomials

New inclusion methods for the simultaneous determination of the zeros of algebraic, exponential and trigonometric polynomials are presented. These methods are realized in real interval arithmetic and do not use any derivatives. Using Weierstrass' correction some modified methods with the increased convergence rate are constructed. Convergence analysis and numerical example are included.     

Josephson junction with an amorphous silicon barrier

A Josephson junction Nb/Si/Nb with a 10 nm thick amorphous silicon barrier is studied. The upper electrode contains a 2 nm thick sublayer of amorphous phase adjacent to the barrier, as revealed by cross-sectional TEM. Thus, the junction can be considered as a S-I-N-S system with the N layer represented by amorphous niobium. Peculiarities in the I–V and Δ(T) dependencies are observed and explained as a consequence of a proximity effect present in the upper electrode.     

An approach to emulating separable graphs

A technique foremulating multicomputer interconnection networks that are based onseparable graphs (graphs having bounded degree and sublinear multicolor recursive bisectors) is presented. Efficient emulations among interconnection networks are necessary for porting programs designed for one network to another.Emulations are formalized asgraph embeddings, where the nodes (processors) of theguest graph (emulated network) are assigned to nodes of thehost graph (emulator), while the edges (communication links) of the guest are routed via paths in the host. The communication slowdown in an emulation depens on thedilation (length of the longest routing path) and thecongestion (number of paths that contend for a host edge) of the embedding. Theexpansion of the embedding (the ratio of the sizes of the host to guest) determines the inefficiency of processor utilization. Cell trees are introduced as interconnection networks whose special communication properties enable them to serve as intermediate devices in these emulations. Nodes in cell trees are organized into equinumerous parts calledcells; the cells are labeled by nodes of a complete binary tree. Communication in cell trees is restricted to two specific and distinct primitives:cell communication is confined within cells, whiletransfer communication occurs between adjacent cells. Rather than solved directly, the emulation problem for the original guest-host pair is decomposed into two independent parts: emulating the guest by the cell tree, and emulating the cell tree by the host.In emulations of separable graphs by cell trees, the node assignment that ensures small dilation is derived from the separator-based decomposition of guest graphs. The congestion-free edge routing is achieved by coordinatingglobal andlocal phases, which are based on two characteristic cell-tree communication primitives.The technique is instantiated by emulating cell trees on specific host graphs. Withshuffle-like hypercube-derivative networks as hosts new constant-expansion emulations are obtained that have both dilation and congestion logarithmic in the size of the multicolor bisector of guest graphs. These emulations are the first such to have optimal (up to constants)congestion; they provide the firstoptimal algorithm for emulating arbitrary separable graphs on shuffle-like networks. The application of the technique tohypercubes as hosts also produces optimal emulations that differ from those previously known by having smaller expansion constants.This research was supported in part by NSF Grants CCR-88-12567 and CCR-90-13184, and by the University of Massachusetts Graduate School Fellowship for the academic year 1991-92. A preliminary version of this paper was presented at the 3rd ACM Symposium on Parallel Algorithms and Architectures, July 22–24, 1991, in Hilton Head, South Carolina, USA.     

Reactive energy measurement using frequency controlled analog-to-pulse-rate converter

Contents This paper analyzes a problem of phase shifting and deseribes a novel method for electronic reactive energy measurement. The proposed measurement structure, composed of an integrator as a phase shifting circuit and a frequency controlled analog-to-pulse-rate converter, provides for the measurement completely in accordance with IEC definition of reactive energy, which is performed with simple but high performance metering device.

---

Die Blindverbrauchsmessung anhand eines netzsynchronisierten Analog-Frequenz-Wandlers

Übersicht In diesem Artikel wird das Problem der Phasenverschiebung analysiert und eine neue Meßmethode für elektronische Blindverbrauschsmessung aufgezeigt. Die vorgeschlagene Strucktur, bestehend aus einem Integrator als Phasenschieber und netzkontrolliertem Analog-Frequenz-Wandler, ermöglicht die Verwirklichung eines einfachen aber präzisen Elektrizitätszählers zur Messung der Blindenergie, dessen Arbeitsprinzip mit den IEC Empfehlungen vollkommen übereinstimmt.

     

Computer program for the construction of the level scheme on the basis of energy balance of gamma transitions

A computerised method is presented for the construction of the level scheme on the basis of measured energies of the gamma transitions without any previous knowledge of the observed isotope. The method and the steps of the algorithm are discussed. The calculated results are compared with the published schemes for the given isotopes.