对大学信息技术课程建设思路的探讨

随着社会产业结构的调整，信息技术教育的内容和要求发生了巨大变化，开创新的教育理念和教育方法要从课程建设和师资培养两个方面入手。课程建设是高等学校教学管理工作建设及专业建设的重要内容，师资培养是提高整体教育水平的关键。     

Oxidative Dehydrogenation of Ethylbenzene with Carbon Dioxide over Metal-Doped Titanium Oxides

Various metal-doped (Fe, V, Zr, Mg) titanium oxides were prepared by an acid-catalyzed sol–gel method and their properties as catalysts were investigated for oxidative dehydrogenation of ethylbenzene in the presence of carbon dioxide. The characterization techniques, XRD, BET, TGA were employed to analyze the features of catalyst. Fe₃Ti catalyst was found to be quite effective among the catalysts tested at 823 K, 39.8% ethylbenzene conversion and 98% styrene selectivity were acquired.     

前大油田注水系统防腐防垢技术的研究

前大油田注水系统腐蚀、结垢问题十分突出,开发了适用于前大油田注水水质的JYSJ-Q型杀菌剂、JYHZJ-Q型缓蚀阻垢剂,并通过试验确定了配套加药工艺.经现场应用,有效缓解了注水系统的腐蚀结垢问题,获得了显著的社会效益及经济效益.     

含氮氧化物(NOx)废气的处理方法

介绍了氮氧化物废气的产生原理、处理方法,并结合某厂硝化废气处理装置改造过程的实例,对加压水吸收处理氮氧化物废气的方法做了详细介绍,同时将该法与其他处理方法进行了比较.     

非水电解质浓溶液的热力学研究(Ⅰ)——用缔合模型关联、推算298.15K时HCL甲醇浓溶液的活度系数

利用HCl在甲醇中稀溶液的活度系数,通过Pitzer的缔合模型,关联出298.15K HCl在甲醇中的缔合常数Kx=1.7×10~2,然后利用HCl在甲醇中浓溶液的活度系数关联出近程作用单参数,进而推算溶剂甲醇的活度系数及溶液总压,均得到满意的结果,说明HCl甲醇浓溶液的热力学关联必须考虑HCl的部分离解效应。     

Synthesis, characterization of bimetallic Sn-Zn-MCM41 and its catalytic performance in the hydroxylation of phenol

A series of Sn-Zn modified-MCM41 has been synthesized by direct hydrothermal method and characterized using ICP, XRD, TG/DTA, FT-IR, HRTEM and N_2-adsorption techniques. Catalytic performances of the obtained materials were evaluated in the hydroxylation of phenol with H₂O₂. Results indicated that all the samples exhibited typical hexagonal arrangement of mesoporous structure with high surface area and the heteroatoms were probably incorporated into the framework of MCM41. Catalytic tests revealed that the bimetallic incorporated materials were effective catalysts in the hydroxylation of phenol. The conversion of phenol could be reach to 56.8% for the catalysts with Sn: Zn: Si = 2.69: 4.57: 100 (molar ratio) under the optimized reaction conditions. Moreover, the materials containing Sn and Zn exhibited higher catalytic activity than monometallic Sn and Zn modified MCM41.     

Shear creep resistance of styrene–isoprene–styrene (SIS)‐based hot‐melt pressure‐sensitive adhesives

The effects of the properties of substrates and tackifier on the shear creep of SIS‐based HMPSAs were investigated. The holding power (t_b) and shear adhesion failure temperature (SAFT) were measured. The relationship between the complex viscosity and the holding power was examined. The holding power and SAFT values of the triblock SIS blends were higher than those of the diblock‐containing SIS blends, perhaps because blends using triblock SIS have higher crossover temperature and complex viscosity than those using diblock‐containing SIS. Higher levels of aromatic resin‐modified aliphatic tackifier and rosin ester were found to decrease the holding power of the HMPSAs. This maybe due to the fact that rosin ester and aromatic‐modified aliphatic resin are compatible with both the ends and midblocks of SIS. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 825–831, 2006     

超滤-反渗透集成工艺处理玉米酒糟废水

研究了玉米酒精生产过程中产生的玉米酒糟废水的膜分离过程,开发了处理玉米酒糟废水的超滤-反渗透集成工艺。超滤选用截留相对分子质量为6 000的GR81PP膜平板分离器,入口压力控制为0.6 MPa,操作温度为50℃;反渗透选用标准脱盐率为90%的ESNAI-4040卷式膜分离器,入口压力控制为2.2 MPa,操作温度为40℃。反渗透透过液中蛋白质的平均截留率为94.70%,甘油的平均截留率为65.15%,COD值降到1 000 mg/L左右,可作为工艺回用水,而且反渗透浓缩液中可回收甘油等有用物质,超滤浓缩液可浓缩成饲料,节能效果显著。     

多模式无线传感机器人的研究与设计

所设计机器人主要具有无线测温、测距、自动避障以及远距离遥控4种工作模式。设计分为两个分系统:遥控端分系统和驱动控制端分系统,两个分系统采用半双工通信方式。主要阐述驱动控制端的硬件和软件设计。其硬件平台采用MSP430F5438A作为MCU,CC1100作为无线传输模块。在设计中还增加了三轴位移模块,保证了机器人运动的稳定性。通过将机器人的灵活运动性与无线传感的实时可控性相结合,大大增加了产品的实用性和使用范围。     

基于CDT2000 I/O口的A/D转换系统设计

为实现传感器数据快速、高精度地转换,提出了一种采用AD7891芯片的A/D转换系统的设计方法。数据读、写和并行工作时序通过CDT2000 I/O口控制,CDT2000 I/O口的电位变化由PC/104通过总线操作。在AD7891与CDT2000之间添加JK触发器实现对A/D转换完成的识别。试验结果表明,这种方法能够满足数据采集系统的设计要求,并且在硬件上较容易实现。