基于安全隔离的边界防护体系的设计与实现

本文针对电子政务信息系统的特点,设计了基于安全隔离的边界防护体系。将安全隔离技术应用到电子政务中,实现了数据的安全高效实时传输,形成了多方位的安全边界防护体系架构。     

考虑冷变形加工硬化的翻边力理论计算

在分析现有计算公式存在不足的基础上,根据翻边变形区材料的应力应变特点,考虑了冷变形加工硬化(取幂函数硬化规律)和变形区材料厚度变化(翻边为变薄)两个因素的影响,利用金属塑性成形问题求解理论中的主应力法,推导和提出了圆孔翻边力计算的一个新公式.通过用钢板(SPCC)和铜板(T1)进行了翻边工艺试验的验证,并与经验公式和现有理论公式的计算结果进行了比较,表明新公式计算结果能接近于实际,且原理上更为科学合理.     

均苯四酸二酐凝华结晶精制的最佳条件研究

研究了均苯四酸二酐（简称均酐或PMDA）凝华结晶精制的最佳条件,并以均酐在定温下的平衡蒸汽压为基础,推导出凝华结晶条件数学关系式．该式把氧化反应的空速,气相组成及捕集温度等工艺参数与捕集率关联起来,并制作出捕集温度对均酐凝华结晶效率和均酐纯度关系曲线图．同时讨论了拉乌尔数学关系式在处理本体系的适应范围．指出在低捕集率情况下,引入修正项后的拉乌尔数学关系式才能与实验值吻合．     

Unified analytical solution for deep circular tunnel with consideration of seepage pressure,grouting and lining

Journal of Central South University - A new unified analytical solution is presented for predicting the range of plastic zone and stress distributions around a deep circular tunnel in a homogeneous...     

Improved Computational Model of Grid Cells Based on Column Structure

To simulate the firing pattern of biological grid cells, this paper presents an improved computational model of grid cells based on column structure. In this model, the displacement along different directions is processed by modulus operation, and the obtained remainder is associated with firing rate of grid cell. Compared with the original model, the improved parts include that: the base of modulus operation is changed, and the firing rate in firing field is encoded by Gaussian-like function. Simulation validates that the firing pattern generated by the improved computational model is more consistent with biological characteristic than original model. Besides, the firing pattern is badly influenced by the cumulative positioning error, but the computational model can also generate the regularly hexagonal firing pattern when the real-time positioning results are modified.     

用双层辉光等离子法在钛表面制备的Ti-Pd合金层性能研究

采用双层辉光等离子冶金技术在纯钛表面制备了Ti—Pd合金层。其深度大约为90μm，Pd含量呈梯度变化，并出现了TiPd3，TiPd2，Ti2Pd3，Ti3Pd5，TiPd，Ti4Pd等6种化合物相和Pd相。合金层在100℃的NaCl饱和溶液＋HCl溶液以及40℃的8．6％H2SO4溶液中的耐缝隙腐蚀性能优于Ti0．2Pd合金；在室温80％H2SO4的溶液中，腐蚀速率仅为0．682mm／a，是Ti0．2Pd合金的18．2％：在室温30％HCl的溶液中，表面Ti—Pd的腐蚀速率仅为0．004mm／a，是Ti0．2Pd合金的12．5％。     

THERMODYNAMICS AND PHASE EQUILIBRIUM OF Cu－Y－O，Cu－Y－S，Cu－Y－O－S LIQUID SOLUTIONS

ＴＨＥＲＭＯＤＹＮＡＭＩＣＳＡＮＤＰＨＡＳＥＥＱＵＩＬＩＢＲＩＵＭＯＦＣｕ－Ｙ－Ｏ，Ｃｕ－Ｙ－Ｓ，Ｃｕ－Ｙ－Ｏ－ＳＬＩＱＵＩＤＳＯＬＵＴＩＯＮＳ￥Ｄｕ，Ｔｉｎｇ；Ｌｉ，Ｇｕｏｄｏｎｇ（ＣｅｎｔｒａｌＩｒｏｎａｎｄＳｔｅｅｌＲｅｓｅａｒｃｈｉｎｓｔｉｔ...     

隔直电容在弧焊逆变器中抗偏磁能力的分析

本文采用状态平均法建立了隔直电容在知式焊接逆变器中抗偏磁的动态模型，并进行了动态分析，为焊接逆变器的设计提供了理论依据。     

Generalized incremental frequency method for topological designof continuum structures for minimum dynamic compliance subject to forced vibration at a prescribed low or high value of the excitation frequency

The application of multidisciplinary design optimisation is mostly confined to bi-disciplinary systems such as fluid-structure interaction problems. High fidelity models of three disciplines involving electromagnetic-thermal-structural designs are rare. Here, the multidisciplinary optimisation of such a design is presented. The device comprises a C-shaped iron core and a single coil. The problem is decomposed using a monolithic multidisciplinary feasible architecture. The multidisciplinary analyses involve a single three-dimensional finite element mesh for transient non-linear electromagnetic, non-linear-static thermal, and linear-static structural models. During each multidisciplinary iteration the mesh is linearly morphed. A gradient based optimisation algorithm in combination with a multi-start routine is applied to the constrained mass minimisation problem. Multidisciplinary feasibility is ensured by convergence of a single coupling parameter i.e. air-gap deformation. In conclusion, some multidisciplinary optimisation, analyses, and decomposition considerations are discussed.     

信息安全策略实施困难的原因与对策分析

随着企业生产规模的扩大,其所掌控的资产也越来越多。信息作为企业重要的资产,其安全性正得到越来越多的企业的关注,很多企业为了保证自身信息的安全与保密性,也制订了自身的信息安全策略。然而,很多企业的信息安全策略常常形同虚设,没有发挥其应有的作用,甚至存在着严重的漏洞,为企业的健康发展埋下了不小的隐患。笔者结合自身多年的工作经验,就企业信息安全策略实施过程中存在的问题进行分析,并针对性的提出几点对策,希望对相关人士能有所帮助。