Effects of Sodium Hydroxide and Selected Inorganic Phosphates on the Characteristics of Reduced Sodium Meat Emulsions

The effects of adding sodium hydroxide (NaOH), separately or in combinastion with various inorganic phosphates, on meat emulsion characteristics were studied. In comparing the addition of either NaPP or NaOH, 0.075% NaOH resulted in a higher raw emulsion pH and greater solubilized protein than 0.30% NaPP, but NaPP resulted in a more stable emulsion. The combination of 0.075% NaOH and 0.30% NaPP resulted in a soluble protein level less than when the ingredients were added individually and only slightly higher than if neither were present. The addition of NaOH (at 1 part NaOH to 4 parts phosphate) decreased cooked yields. With NaAPP and NaPP, NaOH reduced yields below that of the control.     

Controlled undercooling of liquid iron in contact with ZrO2 and MgO substrates under varying oxygen partial pressures

The objective of this study is to determine the conditions under which the inclusions present in liquid steel can act as heterogeneous nucleants for solidification. In order to study the factors that define the undercooling of a given metal/oxide couple, the undercooling of a pure iron sessile droplet in contact with Al₂O₃, ZrO₂, and MgO substrates was measured under controlled oxygen partial pressures by observing droplet recalescence. The results showed that the undercooling of iron, in contact with a particular substrate, did not have a unique value, but was significantly affected by the oxygen content on the gas phase. For oxygen partial pressures between 10⁻²¹ and 10⁻¹⁹, the undercooling of iron on ZrO₂ substrates was stable and around 290 °C. In the same range of oxygen partial pressure, the undercooling of iron on MgO substrates remained below 100 °C due to the low stability of this oxide. At lower oxygen contents, substrate decomposition might be the cause for the observed drop in the undercooling of iron on ZrO₂ substrates to below 100 °C. The undercooling also decreased for increasing oxygen content as verified when the gas was changed from gettered Ar/Ar-H₂ to CO/CO₂ mixtures. The variation in undercooling was related to the wetting of the substrate by the liquid metal, where the deep undercooling observed in the ZrO₂ experiments occurred when the highest contact angle between the liquid metal and the substrate was achieved.     

Textural states of a hot-worked MA2-1 magnesium alloy

Quantitative texture analysis is used to study texture formation in an MA2-1 magnesium alloy subjected to axisymmetric upsetting at temperatures of 250–450°C and strain rates of 10^?4–10^{0 ?1}. The deformed structure is examined by optical microscopy, and the results obtained are used to plot the structural-state diagram of the alloy after 50% upsetting. The experimental textures are compared with the textures calculated in terms of a thermoactivation model.     

B-cell and T-cell immunoblastic lymphomas of baboons

The results of morphological study of B- and T-cellular immunoblast baboon lymphomas are presented. Differences are found both in the structure of tumour cells and in the histostructure of tumours as a whole. The tumor cells of B-immunoblastic lymphomas expressed mainly IgM. The tumour cells of certain T-immunoblastic lymphomas being investigated by means of monoclonal OKT4 antibodies had a surface phenotype peculiar to T-helper cells.     

Fast location of high-order modes for boxed microstrip with finite strip thickness

Many analyses of boxed microstrip discontinuities require the location of large numbers of high-order modes. Using Sturm-Liouville theory, this letter derives a relationship between microstrip modes and slab-loaded guide modes, leading to an efficient mode location algorithm for microstrip, including microstrip with finite strip thickness.<>     

Bestimmung von natriumhaltigen Zusatzstoffen in Holzwerkstoffen

Methods for the determination of sodium or sodium-containing components in wood and wood-based products are described. Sodium contents are shown for wood, urea formaldehyde (UF) resins, resol-type phenol formaldehyde (PF) resins, and particleboards produced with these resins.     

Progress toward roll-to-roll processing of inorganic monolithic electrochromic devices on polymeric substrates

As electrochromic device (ECD) emerges into the market, the necessity of cost reduction via high-throughput manufacturing is unavoidable. Inorganic monolithic ECD has compatibility in its manufacturing steps, allows continuous processing and hence low-cost ECD. A roll-to-roll (R2R) production is the industrial standard for high-throughput processing and was chosen to synthesize ECD on polymeric substrates. Preliminary success by implementing methods compatible to the aforementioned R2R processing has been achieved; however, continuous test-runs on an R2R machine are still limited.     

Audio Denoising by Time-Frequency Block Thresholding

Removing noise from audio signals requires a nondiagonal processing of time-frequency coefficients to avoid producing ldquomusical noise.rdquo State of the art algorithms perform a parameterized filtering of spectrogram coefficients with empirically fixed parameters. A block thresholding estimation procedure is introduced, which adjusts all parameters adaptively to signal property by minimizing a Stein estimation of the risk. Numerical experiments demonstrate the performance and robustness of this procedure through objective and subjective evaluations.