Effects of Regioselectivity and Lipid Class Specificity of Lipases on Transesterification,Exemplified by Biodiesel Production

Lipase-catalyzed ethanolysis of triolein was studied as a model for biodiesel production. Four lipases were immobilized on porous polypropylene, and ethanolysis reactions were carried out in methyl t-butyl ether. The reaction products were analyzed using gas chromatography. Three of the four lipases studied were efficient in the conversion of triolein to 2-monoolein, but slow in the final step of producing glycerol. However, Candida antarctica lipase B was slow in the conversion of triolein, but more efficient in the subsequent two steps than the other lipases. The 1,3-selectivity of the lipases was less pronounced for the monooleins than for triolein. Silica gel was investigated as a catalyst for acyl migration, showing an increase in biodiesel yield with three of the lipases, but a reduction in yield when C. antarctica lipase B was used. The highest biodiesel yield (96 %) was obtained with a combination of Rhizopus arrhizus lipase and C. antarctica lipase B.     

Effects of HSPA8, an evolutionarily conserved oviductal protein, on boar and bull spermatozoa

Previous studies have shown that a soluble protein fraction derived from preparations of apical plasma membrane (APM) of the oviductal epithelium enhances the in vitro survival of mammalian spermatozoa. Here, we show that the survival enhancing property of the soluble protein fraction seems to depend significantly upon heat shock 70 kDa protein 8 (HSPA8 previously known as HSPA10). The following findings in the present study enabled us to draw this conclusion: first, using proteomic analysis, we identified a subset of 70 kDa oviductal surface proteins that bound to spermatozoa, one of which was HSPA8. Second, pre-treatment of the soluble protein fraction with anti-HSPA8 antibody reduced the 24 h (at 39 degrees C) sperm survival enhancement effect normally induced by the presence of 200 microg/ml soluble APM proteins. Third, complementary experiments showed that substituting the soluble protein fraction with bovine recombinant HSPA8 (0.5-2 microg/ml) also elicited the sperm survival effect. Finally, we also tested the effect of bovine recombinant HSPA8 on bull spermatozoa and found similar, dose-responsive, sperm survival promoting effects. The conserved nature of HSPA8 between mammalian species suggests that this protein may represent a common biological mechanism for the maintenance of sperm survival in the oviduct.     

Trends and sustainability criteria of the production and use of liquid biofuels

Environmental impacts associated with the use of fossil fuels, rising prices, potential limitations in supply and concerns about regional and national security are driving the development and use of biomass for bioenergy, biofuels and bioproducts. However, the use of biomass does not automatically imply that its production, conversion and use are sustainable. Conflicts between various ecosystem services (economic production of food, fodder and fuels, biodiversity, social and cultural values, etc.) that are provided by fertile land are increasing as well. Hence, a developed thinking on how to balance between these services is desirable.There is a significant amount of information available on biofuels and their sustainability. In this paper, different initiatives and sustainability criteria for biofuels are presented and assessed.35 criteria were found in emerging sustainability assessment frameworks. The majority of 12 criteria were focused on environmental issues, 4 were social and only 1 was economic. Energy balance and greenhouse gas balance were perceived as especially critical, social criteria ranked generally low. Although being perceived as important, food security ranked very low.     

Exposure of consumers to deoxynivalenol from consumption of white bread in Hungary

In view of the frequent occurrence of mycotoxins in cereals, a study was initiated to assess the exposure of the Hungarian adult population. Consumption data for 1360 individuals, based on a 3-day questionnaire, indicated that white bread accounted for the major intake of cereal-based products. Various cereal products were analysed for 16 mycotoxins by a LC/MS/MS multi-toxin method with LOD of 16 μg kg?1 and LOQ of 50 μg kg?1. Deoxynivalenol (DON) was most frequently detected, but no acetyl-deoxynivalenol was present in detectable concentrations. Consumer exposure was calculated with standard Monte Carlo probabilistic modelling and point estimates, taking into account bread consumption and DON contamination in independently taken wheat flour and wheat grain samples. Over 55% of cases the DON intake were below 15% of the provisional maximum tolerable daily intake (PMTDI) of 1 μg/(kg bw)/day. However, in 5-15% of cases, the intake from bread consumption alone exceeded the PMTDI. Wheat grain data led to the higher percentage. Intakes estimated from both data sets were at or below the acute reference dose (ARfD) of 8 μg/(kg bw)/day in 99.94-99.97% of cases.     

The effect of conditions of mixing of polypropylene/ethylene-propylene elastomer blends on their morphological structure and impact strength

The dependence of morphological structure and notch impact strength of polypropylene/ethylene-propylene elastomer blends on conditions of mixing was investigated. Two types of polypropylene and two types of ethylene-propylene elastomer having different viscosities were used. At low rates and short times of mixing the samples contain both regions showing fine dispersion and regions showing large elastomeric inclusions surrounded with pure polypropylene. With increasing rate and time of mixing the large inclusions gradually disappear. The conditions of mixing which are necessary for reaching a homogeneous structure of the blends depend on viscosities of the components. The independence of particle size of the rate of mixing in homogeneous samples is discussed on the basis of a dynamic equilibrium between the break up and coalescence of droplets. The notch impact strength of the individual samples of the same blend is determined by the size and number of inhomogeneities (large inclusions) in the given sample.     

Fine structure and related properties of the assembleable carbon nanotubes based electrode for new family of biosensors with chooseable selectivity

Surfaces of constituent parts of biosensors based on single wall carbon nanotube layer were investigated and compare for properly functioning and faulty biosensors. Though the original technology is acceptable for changing of the selectivity, only glucose sensitive biosensors are investigated. Based on the results of the study, a correlation between the features of the nanoscale structures and parameters of amperiometric biosensors for assemblage of which an innovative approach is described. Original template of the electrodes has been prepared on a base of single wall carbon nanotube layer deposited on the supporting polycarbonate membrane. Original immobilisation of enzymes within special membrane allows functional modification of biosensors being accomplished by simple replacement of the enzymatic membrane. The original technology leads to a novel family of biosensors acceptable for detection of wide range of carbohydrates. The morphology and the local electric properties of the constituent parts of the biosensors are characterized by scanning probe microscopy. The sensitivity, selectivity and stability are described for typical types of the biosensors.     

SMS for decision making of SMEs

To pursue the high environmental performance, economic and social effectiveness of the companies, including small and medium enterprises (SMEs), is the key goal of the sustainable development concept. Sustainable development is based on preventive management principles, and their application in SMEs has become an important issue for enhancing competitiveness. Unfortunately, most of the sustainable development-related research is focused on large companies rather than SMEs, especially in the industrial sector. The importance of SMEs often remains unnoticed. Besides, SMEs themselves often have inadequate knowledge about their environmental and social impacts and management, and apply voluntary preventive measures less frequently than large companies. To make sustainable decisions and to improve the environmental performance, economic and social effectiveness of SMEs, an integrated sustainable management system (SMS) based on financial analysis is necessary, oriented to strategic sustainability goals, not requiring significant financial and human resources. Integration of sustainability management accounting and composite sustainable development index methodologies forms the basis of SMS for SMEs decision making. SMS was applied in three pilot SMEs (small-scale wood parquet, medium-scale wood pallets, medium-scale beverage producing companies). In this article, an extensive analysis of a small-scale wood parquet manufacturing company’s case is presented. The application of SMS enabled to identify key sustainability problems and to find solutions to improve the companies’ sustainability performance. SMS application resulted in reduced input materials consumption and the reduction of sustainability costs.     

Characterization of zirconia- and niobia-silica mixture coatings produced by ion-beam sputtering

ZrO2-SiO2 and Nb2O5-SiO2 mixture coatings as well as those of pure zirconia (ZrO2), niobia (Nb2O5), and silica (SiO2) deposited by ion-beam sputtering were investigated. Refractive-index dispersions, bandgaps, and volumetric fractions of materials in mixed coatings were analyzed from spectrophotometric data. Optical scattering, surface roughness, nanostructure, and optical resistance were also studied. Zirconia-silica mixtures experience the transition from crystalline to amorphous phase by increasing the content of SiO2. This also results in reduced surface roughness. All niobia and silica coatings and their mixtures were amorphous. The obtained laser-induced damage thresholds in the subpicosecond range also correlates with respect to the silica content in both zirconia- and niobia-silica mixtures.