SCRATCH RESISTANT POLYIMIDE COATINGS FOR ALUMINOSILICATE GLASS SURFACES

Several polyimide resins were tested as possible scratch resistant coatings for aluminosilicate glass centrifuge tubes. Tubes with siloxane pretreatments provided the best adhesion between the polyimide and glass surface. Resins synthesized with an alkoxysilane group incorporated into the polyimide chain also showed improved adhesion, but the results were not as significant as when the pretreatment was used. Elastic recovery and effective Young's modulus of the polyimide coatings were calculated from nano-scratching. The results indicate that polyimides with a lower modulus, and higher elastic recovery, protected the glass surface best, exhibiting compression of the coating layer. An example was poly-4-4'-oxydiphenylene pyromellitimide (PMDA-ODA), whereas the coatings with a high effective Young's modulus and low elastic recovery ruptured. An example of a failed coating was poly-4,4'-carbonyldiphenylene 3,3',4,4'-biphenylenetetracarboximide (BPDA-DABP) which had low amount of elastic recovery, high effective Young's modulus and a large amount of flaking during macroscratch testing.     

Yeast exo-β-glucanases can be used as efficient and readily detectable reporter genes in Saccharomyces cerevisiae

Yeast exo-1,3-β-glucanases are secretable proteins whose function is basically trophic and may also be involved in cell wall glucan hydrolytic processes. Since fluorescein di(β-D -glucopyranoside) is a fluorogenic substrate detectable and quantifiable by flow cytometry, it was used for testing the ability of the EXG1 gene product of Saccharomyces cerevisiae and its homologous gene in Candida albicans to function as reporter genes. These open reading frames were coupled to different promoters in multicopy plasmids, and exoglucanase activity quantified at flow cytometry. Exoglucanases were found to be useful tools for the study of promoter regions in S. cerevisiae. This technique has the advantage over other reporter gene systems—such as β-galactosidase fusions—that it does not require permeabilization of yeast cells and therefore it allows the recovery of viable cells—by sorting—after flow cytometry analysis.     

A typology of propagation of changes on the structure of a multiregional economic system: the case of the European Union, 1975–1985

The effects of structural change in all sectors of some regions in multiregional input-output systems are explored in this paper. For each region, the changes in direct inputs are decomposed into a matrix of intraregional changes and a matrix of interregional backward linkage changes. This distinction provides for a decomposition of changes in the Leontief inverse into a sum of matrices representing the matrices of intraregional and interregional fields of influence of changes. In turn, this process facilitates the identification of changes in gross outputs that may be traced to changes in intra- and interregional structural changes. The analysis is applied to the European input-output tables for 1975 and 1985.This paper was presented at the 1996 annual meeting of the Western Regional Science Association     

Stress Concentration Factors for a Circular Hole in Curved Beams Under Bending Loads

Abstract: As a contribution to the field of stress concentration studies, the case of circular hole in curved bar elements under bending is hereby studied. Trend values of stress concentration factors (SCF) are presented based on selected variables of the problem for two critical hole locations. The results will help to identify an SCF law for practical use by applying the statistical method of regression analysis. Two approximations obtained by means of computational methods are compared with those obtained by photoelastic experimental method.     

Friction Stir Welding of Ceramic Particle Reinforced Aluminium Based Metal Matrix Composites

The mechanical and microstructural properties of 6061+20% Al₂O_3p and 7005+10% Al₂O_3p aluminium based metal matrix composites joined by friction stir welding were analyzed in the present study. The two materials were welded into the form of sheets of 7 mm thickness after T6 treatment and were tested in tension at room temperature. The microstructure of the joints was observed by optical microscopy and the fracture surfaces were analyzed by employing a scanning electron microscope equipped with field emission gun in order to study the micromechanisms involved during the deformation.     

The feasibility of smoking bans on psychiatric units

Cryptococcal meningitis has a high mortality rate of central nervous infection. The patients usually die of the disease itself, or complications from increased intracranial pressure. Early diagnosis and treatment, including surgical drainage, will improve the results. In this series, twenty-one patients with high intracranial pressure (ICP > 300 mmH2 O) are presented. Fourteen received implantation of Ommaya reservoir to aspirate cerebrospinal fluid (CSF) for relief of symptoms of ICP. Meanwhile 4 of these 14 patients also received intraventricular injection of amphotericin B because of poor response to systemic drugs. Another seven patient received systemic drug therapy only. Survival during therapy occurred in 11 of 14 patients in the surgical group, compared with only 1 of 7 patients treated by drug therapy alone (P = 0.019). In the 14 patients who received implantation of an Ommaya reservoir, there was one complication of CSF leakage when the reservoir ruptured because of repeated aspiration. For patients with cryptococcal meningitis with high ICP, early implantation of an Ommaya reservoir will improve the survival rate.     

Properties of paper coated with kaolin: The influence of the rheological modifier

The first part of this paper analyses the influence of the molecular weight and concentration of carboxymethyl cellulose (CMC) and of kaolin concentration on rheology of the coating colours and on paper properties coated with ultra lightweight coatings (ULWC). In the second part, relationships between the rheological characteristics of the coating colour formulations and coated paper surface quality was also studied.New indexes on paper roughness at micro-scale are presented (RZI and SRI). In general, they show good correlation with sheet gloss. A new gloss index (SGI) is presented, accounting for the contribution of gloss from machine direction (MD) and cross direction (CD). Porosimetry was used to access microstructural characteristics in order to correlate them with light scattering and gloss properties. The former property is closely related to Hg intrusion volume of the coated layer while gloss is related to surface porosity with pore diameters in the range of 7–15 μm as measured by Hg intrusion volume.     

Assessment of Bonelike® graft with a resorbable matrix using an animal model

Synthetic bone grafts have been developed to provide an alternative to autografts and allografts. Bonelike® is a patented synthetic osteoconductive bone graft that mimics the mineral composition of natural bone. In the present preliminary animal studies a user-friendly version of synthetic bone graft Bonelike® have been developed by using a resorbable matrix, Floseal®, as a vehicle and raloxifene hydrochloride as a therapeutic molecule, that is known to decrease osteoclast activity and therefore enhanced bone formation. From histological and scanning electron microscopy evaluations, the use of Bonelike® associated with Floseal® and raloxifene hydrochloride showed that new bone was rapidly apposed on implanted granules and also that the presence of the matrix and therapeutic molecule does not alter the proven highly osteoconductivity properties of Bonelike®. Therefore, this association may be one step-forward for the clinical applications of Bonelike® scaffolds since it is much more easy-to-handle when compared to granular materials.     

Mycological survey for potential aflatoxin and ochratoxin producers and their toxicological properties in harvested Brazilian black pepper.

A mycological survey was carried out on 115 samples of whole dried black pepper seeds, from two main production regions of Brazil (Pará and Espírito Santo). A high incidence of contamination was verified in both regions when 99.1% of the samples showed filamentous fungi contamination. A total of 497 species of nine different genera were isolated (Aspergillus, Eurotium, Rhizopus, Penicillium, Curvularia, Cladosporium, Absidia, Emericella and Paecilomyces). The genus Aspergillus was the predominant (53.5%) followed by species from the Eurotium genus (24.5%). Eurotium chevalieri (16.4%) was the most predominant species followed by A. flavus (14.6%) present on 55 samples of black pepper (47.8%) analysed. Twenty-five samples (21.7%) were contaminated with aflatoxigenic strains of A. flavus and A. parasiticus. In relation to the types of aflatoxins produced by mycotoxigenic strains, it was observed that 25 strains (44.6%) of 56 isolated of A. flavus produced aflatoxins. From 12 samples, A. ochraceus species were isolated in low frequency (3.5%). Two strains of A. ochraceus from 16 isolated were producers of ochratoxin A. With respect to the aflatoxins and ochratoxin A natural contamination, none of the samples presented detectable levels of these mycotoxins using thin-layer chromatographic analysis.