Biomic river restoration: A new focus for river management

River management based solely on physical science has proven to be unsustainable and unsuccessful, evidenced by the fact that the problems this approach intended to solve (e.g., flood hazards, water scarcity, and channel instability) have not been solved and long‐term deterioration in river environments has reduced the capacity of rivers to continue meeting the needs of society. In response, there has been a paradigm shift in management over the past few decades, towards river restoration. But the ecological, morphological, and societal benefits of river restoration have, on the whole, been disappointing. We believe that this stems from the fact that restoration overrelies on the same physical analyses and approaches, with flowing water still regarded as the universally predominant driver of channel form and structural intervention seen as essential to influencing fluvial processes. We argue that if river restoration is to reverse long‐standing declines in river functions, it is necessary to recognize the influence of biology on river forms and processes and re‐envisage what it means to restore a river. This entails shifting the focus of river restoration from designing and constructing stable channels that mimic natural forms to reconnecting streams within balanced and healthy biomes, and so levering the power of biology to influence river processes. We define this new approach as biomic river restoration.     

Influence of different reactor types on Nannochloropsis oculata microalgae culture for lipids and fatty acid production

Greenhouse gases emitted into the atmosphere by burning of fossil fuels cause global warming. One option is obtaining biodiesel. Nannochloropsis oculata was cultured under different light intensities and reactors at 25°C for 21 days with f/2 medium to assess their effects on cell density, lipid, and fatty acids (FAs). N. oculata improved cell density on fed-batch glass tubular reactor (7 L) at 200 μmol E m⁻² s⁻¹, yielding 3.5 × 10⁸ cells ml⁻¹, followed by fed-batch Erlenmeyer flask (1 L) at 650 μmol E m⁻² s⁻¹ with 1.7 × 10⁸ cells ml⁻¹. The highest total lipid contents (% g lipid × g dry biomass⁻¹) were 44.4 ± 0.8% for the reactor (1 L) at 650 μmol E m⁻² s⁻¹ and 35.2 ± 0.2% for the tubular reactor (7 L) at 200 μmol E m⁻² s⁻¹, until twice as high compared with the control culture (Erlenmeyer flask 1 L, 80 μmol E m⁻² s⁻¹) with 21.2 ± 1%. Comparing the total lipid content at 200 μmol E m⁻² s⁻¹, tubular reactor (7 L) and reactor 1 L achieved 35.2 ± 0.2% and 28.3 ± 1%, respectively, indicating the effect of shape reactor. The FAs were affected by high light intensity, decreasing SFAs to 2.5%, and increased monounsaturated fatty acids + polyunsaturated fatty acids to 2.5%. PUFAs (20:5n-3) and (20:4n-3) were affected by reactor shape, decreasing by half in the tubular reactor. In the best culture, fed-batch tubular reactor (7 L) at 200 μmol E m⁻² s⁻¹ contains major FAs (16:0; 38.06 ± 0.16%), (16:1n-7; 30.74 ± 0.58%), and (18:1n-9; 17.15 ± 0.91%).     

Aramid pulp treated with imidazolium ionic liquids as a filler in rigid polyurethane bio-foams

This article reports an aramid pulp (AP) treated with two ionic liquids (IL), namely 1-n-butyl-3-methylimidazolium chloride (C₄.Cl) and 1-carboxymethyl-3-methylimidazolium chloride (HO₂C), and its use as a filler in reinforced rigid polyurethane foams (RPUF). The RPUF were incorporated with the treated AP at three weight fractions (c.a. 0.1, 0.5, and 1.0 wt%) and were produced by the free rising method. The results showed that the studied IL promoted a better interaction between the AP and the RPUF system, which increased the overall reactivity, imparting a higher cell anisotropy. This also yielded a positive effect in mechanical properties and thermal stability of the RPUF. Compared to the neat RPUF, outstanding increases of approximately 50 and 20% were achieved in compressive modulus and strength, respectively. In all, the use of IL promoted increased compatibility between matrix and reinforcement, especially that HO₂C IL.     

Analysis of surface integrity for minimum quantity lubricant—MQL in grinding

The quality of machined components is currently of high interest, for the market demands mechanical components of increasingly high performance, not only from the standpoint of functionality but also from that of safety. Components produced through operations involving the removal of material display surface irregularities resulting not only from the action of the tool itself, but also from other factors that contribute to their superficial texture. This texture can exert a decisive influence on the application and performance of the machined component. This article analyzes the behavior of the minimum quantity lubricant (MQL) technique and compares it with the conventional cooling method. To this end, an optimized fluid application method was devised using a specially designed nozzle, by the authors, through which a minimum amount of oil is sprayed in a compressed air flow, thus meeting environmental requirements. This paper, therefore, explores and discusses the concept of the MQL in the grinding process. The performance of the MQL technique in the grinding process was evaluated based on an analysis of the surface integrity (roughness, residual stress, microstructure and microhardness). The results presented here are expected to lead to technological and ecological gains in the grinding process using MQL.     

The oxidation of two Fe−Nb alloys under low oxygen pressures at 600–800°C

The oxidation of two Fe–Nb alloys containing 15 and 30 wt.% Nb has been studied at 600–800°C under low oxygen pressures, similar to those prevailing in environments of the coal-gasification type. The reaction produced only an internal oxidation of niobium to form two niobium oxides (NbO₂ and Nb₂O₅) and in some cases a double Fe–Nb oxide. The kinetics of this reaction were very slow at 600°C but rather fast at 700 and 800°C. A peculiar feature of the internal oxidation of these alloys is that the distribution of the internal oxides follows closely that of the Nb-rich phase in the original two-phase alloys. This behavior, as well as the lack of formation of external scales of niobium oxides, is mainly a result of the limited solubility of niobium in iron and of the consequent presence of two metal phases in the alloys.     

Optimizing the use of dry cutting in rough turning steel operations

The main objective of using cutting fluids in machining operations is the reduction of temperature in the cutting region to increase tool life. However, the advantages offered by cutting fluids have been strongly debated because of their negative effects on the economic aspect, the environment and the health of workers using them. A trend to solve these problems is cutting without fluid, a method named dry cutting, which has been made possible due to technological innovations. This work aims to seek conditions in which dry cutting is satisfactory compared with the flood of fluid (called here wet cutting) usually used. Aiming at this goal, several experiments were carried out varying parameters such as cutting speed, feed, depth of cut and tool material in rough turning of ABNT 1045 steel in dry and wet cutting. The analysis of the results showed that wet turning is, as expected, better for tool life. The second conclusion is that dry cutting cannot be used with large depth of cut. But the main conclusion is that, if the tool material is changed to a more wear resistant one, dry cutting can be used with results very similar to those obtained with a flood of fluid.     

Calibration system based on a laser interferometer for kinematic accuracy assessment on machine tools

This paper deals with a method for the dynamic calibration of the kinematic accuracy of lathes and thread grinding machines in screw-cutting mode but free of load. It utilizes a precision polygon mounted on the spindle, in conjunction with a trigger device to generate angular pulses. A laser interferometer system assesses the longitudinal position of the saddle with respect to a cube-corner affixed on the chuck. As the spindle rotates, a string of pulses is generated by the angular trigger device. These pulses are used for triggering the laser interferometer. A software package has been elaborated to enable on-the-fly data acquisition and to display the kinematic errors in graphical form. The components of the kinematic error considered are the progressive pitch error, the cyclic error and spindle-free float. Application of this kinematic error calibrator on a universal and a CNC lathe has been carried out. Test results are presented and commented.     

Output feedback of Markov jump linear systems with no mode observation: An automotive throttle application

The note presents an output feedback control strategy for Markov jump linear systems with no mode observation. Based on minimizing a finite‐time quadratic cost, we derive an algorithm that generates output feedback gains that satisfy a necessary optimality condition. These gains can be computed off‐line relying only on the initial condition of the system. This result expands a previous one from the literature that considered state‐feedback only. To illustrate the usefulness of the approach, real‐time laboratory experiments were performed to control an automotive electronic throttle valve subject to Markov‐driven voltage fluctuations. Copyright © 2015 John Wiley & Sons, Ltd.