Hydrogen photocatalytic production from the self-assembled films of PAH/PAA/TiO2 supported on bacterial cellulose membranes

The issues related to renewable energy sources is a matter of great worldwide appeal due to the increasing energy demand, instability in oil prices and environmental problems. In this context, the purpose of this study was to prepare self-assembled films of polyallylamine hydrochloride and poly (acrylic acid) supported onto bacterial cellulose membranes by a layer-by-layer approach with titanium dioxide (TiO₂) nanoparticles and different concentrations of gold for application in hydrogen gas (H₂) production by photocatalysis. The influence of the gold concentration and the presence and size of the gold nanoparticles (Au NPs), as well as the surface and thickness of the films on H₂ production was investigated. The results showed that the film, prepared with a lower concentration of gold, presented the smallest Au NPs and, therefore, greater contact with the TiO₂ nanoparticle surfaces, producing more H₂. By analyzing the variation in all the experimental parameters used in the preparation of the films, it can be concluded that the best H₂ production achieved was 29.12 μmol h^?1 cm².     

Hydrogen production from oil sludge gasification/biomass mixtures and potential use in hydrotreatment processes

Gasification of oil sludge (OS) from crude oil refinery and biomass was investigated to evaluate hydrogen production and its potential use in diesel oil hydrodesulphurization process. Gasification process was studied by Aspen Hysys^® tools, considering different kinetic model for main OS compounds. Air and superheated steam mixtures as gasifying agents were simulated. Gasification parameters like: temperature, syngas chemical composition and gas yield were evaluated. Results showed OS thermal conversion needs a working temperature above 1300 °C to ensure a high conversion (>90%) of OS compounds. Thermal energy requirement for gasification was estimated between 0.80 and 1.25 kWh/kg OS, considering equivalence air (ER) and steam/oil sludge (SOS) ratio between 0.25-0.37 and 0.2–1.5 kg steam/kg OS, respectively. The gas yield was 2.28 Nm³/kg OS, with a H₂ content close to 25 mol%, for a H₂ potential production about 1.84 Nm³ H₂/kg OS; nevertheless, when OS and biomass mixtures are used, hydrogen production increases to 3.51 Nm³ H₂/kg OS, meaning 37% of H₂ (from natural gas) required for diesel oil hydrodesulphurization could be replaced, becoming an added value technological alternative for OS waste conversion as a source of H₂, inducing a considerable reduction of greenhouse gases and non-renewables resources.     

Effects of replacing soybean meal with canola meal differing in rumen-undegradable protein content on ruminal fermentation and gas production kinetics using 2 in vitro systems

Previous research indicated that there were significant differences in rumen-undegradable protein (RUP) among canola meals (CM), which could influence the nutritional value of CM. The objectives of this study were to (1) evaluate the effects of feeding CM with different RUP contents on ruminal fermentation, nutrient digestion, and microbial growth using a dual-flow continuous culture system (experiment 1) and (2) evaluate ruminal gas production kinetics, in vitro organic matter (OM) digestibility, and methane (CH₄) production of soybean meal (SBM) and CM with low or high RUP in the diet or as a sole ingredient using a gas production system (experiments 2 and 3). In experiment 1, diets were randomly assigned to 6 fermentors in a replicated 3 × 3 Latin square. The only ingredient that differed among diets was the protein supplement. The treatments were (1) solvent-extracted SBM, (2) low-RUP solvent-extracted CM (38% RUP as a percentage of crude protein), and (3) high-RUP solvent-extracted CM (50% RUP). Diets were prepared as 3 concentrate mixtures that were combined with 25% orchardgrass hay and 15% wheat straw (dry matter basis). Experiments 2 and 3 had the same design with 24 bottles incubated 3 times for 48 h each. During the 48-h incubation, the cumulative pressure was recorded to determine gas production kinetics, in vitro OM digestibility, and CH₄ production. In experiment 1, N flow (g/d), efficiency of N use, efficiency of bacterial N synthesis, total volatile fatty acids (mM), and molar proportion of acetate, propionate, and isobutyrate were not affected by treatments. There were tendencies for a decrease in ruminal NH₃-N and an increase in molar proportion of butyrate for the SBM diet compared with both CM diets. The molar proportion of valerate was greater in both CM diets, whereas the molar proportion of isovalerate and total branched-chain volatile fatty acids was lower for the CM diets compared with the SBM diet. In experiments 2 and 3, the SBM diet had a greater gas pool size than both CM diets. The SBM diet increased in vitro OM digestibility; however, it also tended to increase CH₄ production (mM and g/kg of DM) compared with both CM diets. Based on the results of this study, CM with RUP varying from 38 to 50% of crude protein does not affect ruminal fermentation, nutrient digestion, and microbial growth when CM is included at up to 34% of the diet.     

Sheep Milk: Physicochemical Characteristics and Relevance for Functional Food Development

Sheep milk has a high nutritional value and high concentrations of proteins, fats, minerals, and vitamins, as compared to the milks of other domestic species. The physicochemical and nutritional characteristics of sheep milk can be advantageous for the manufacture of products containing prebiotic ingredients and/or probiotic bacteria, which are major categories in the functional food market. Following this technological trend, this review will address the characteristics and advantages of sheep milk as a potentially functional food, as well as the development of sheep milk dairy products containing prebiotics and/or probiotics.     

Influence of phosphorylated rice flour on the quality of gluten‐free bread

The chemical modification of rice flour by phosphorylation is an alternative to improve the technological quality of bakery products. The aim of this study was to investigate the effect of phosphorylation process of rice flour on technological properties (specific volume, crumb and crust colour) of gluten‐free breads and the hardening of these breads during two storage temperatures (21 °C and ?24 °C). Breads were made with native rice flour, with phosphorylated rice flour and with wheat flour, used as control. The phosphorylation causes significant reduction in the synaeresis of pastes and in retrogradation tendency of rice flours, varying from 258.7 cP (native rice flour) to 122 cP (phosphorylated rice flour). The breads prepared with phosphorylated rice flour showed reduction in the hardness in both storage temperatures studied and effect on rice bread volume, crumb appearance and colour, demonstrating the possibility of use of the phosphorylated rice flour in gluten‐free breads.     

Biofilm-producing ability of Staphylococcus aureus isolates from Brazilian dairy farms

This study aimed to investigate the in silico biofilm production ability of Staphylococcus aureus strains isolated from milking parlor environments on dairy farms from São Paulo, Brazil. The Staph. aureus isolates were obtained from 849 samples collected on dairy farms, as follows: milk from individual cows with subclinical mastitis or history of the disease (n = 220); milk from bulk tank (n = 120); surfaces of milking machines and utensils (n = 389); and milk handlers (n = 120). Thirty-one Staph. aureus isolates were obtained and categorized as pulsotypes by pulsed-field gel electrophoresis and submitted to assays for biofilm formation on polystyrene, stainless steel, rubber, and silicone surfaces. Fourteen (45.2%) pulsotypes were considered producers of biofilm on the polystyrene microplate assay, whereas 13 (41.9%) and 12 (38.7%) pulsotypes were biofilm producers on stainless steel and rubber, respectively. None of the pulsotypes evaluated produced biofilms on silicone. Approximately 45% of Staph. aureus pulsotypes isolated from different sources on dairy farms showed the ability to produce biofilms in at least one assay, indicating possible persistence of this pathogen in the milking environment. The potential involvement of Staph. aureus in subclinical mastitis cases and its occurrence in milk for human consumption emphasize the need to improve hygiene practices to prevent biofilm formation on the farms studied.     

Use of the jabuticaba (Myrciaria cauliflora) depulping residue to produce a natural pigment powder with functional properties

The aim of this study was to produce a natural pigment powder with functional properties. To optimise the spray-drying process, a central composite design with 17 treatments was used, in which the independent variables were the inlet drying air temperature (138–202 °C), the feed flow rate (20–67 mL/min), and the concentration of the carrier (maltodextrin, 100–300 g/kg of extract). The dependent variables were the moisture content, hygroscopicity, and anthocyanin retention. The samples were analysed by: anthocyanin and phenolic content; antioxidant properties based on the ORAC and DPPH assays; antimicrobial activity against Staphylococcus aureus, Listeria monocytogenes, Salmonella enteritidis, and Escherichia coli; and inhibitory activity against arginase, an enzyme produced by Leishmania amazonensis. The experimental design was not significant or predictive in the ranges studied. The selected samples contained high concentrations of anthocyanins and phenolics, and high antioxidant capacities. In addition, they exhibited antimicrobial activity against three of the four microorganisms tested, and some of the samples also exhibited a bactericidal effect. Moreover, the powders exerted inhibitory activity (64–69%) against arginase. The results obtained in this study suggest that the jabuticaba depulping residue could be used to produce a natural pigment with functional properties.     

An evaluation of the effectiveness of a chemical additive based on sodium benzoate,potassium sorbate,and sodium nitrite on the fermentation and aerobic stability of corn silage

We evaluated the effectiveness of an additive comprising sodium benzoate, potassium sorbate, and sodium nitrite (SSL) as active ingredients for its ability to improve the aerobic stability of corn silages made in North America. In experiment 1, treatment with SSL (1.5 and 2.0 L/t) on whole-plant corn (WPC) was compared with treatment with an additive containing buffered propionic acid and citric acid (BPA; 2 L/t) on corn harvested at 32 and 38% dry matter and ensiled for 120 d. Silage treated with BPA was higher in ammonia-N and propionic acid relative to other treatments. Treatments with all of the additives had numerically, but not statistically, fewer yeasts compared with untreated silage. Both application rates of SSL resulted in lower concentrations of ethanol compared with untreated and BPA silages. Treatment with BPA improved the aerobic stability of silages compared with untreated silage, but the effect from SSL was markedly greater. In experiment 2, WPC was untreated or treated with 2 or 3 L of SSL/t or a microbial inoculant containing Enterococcus faecium M74, Lactobacillus plantarum CH6072, and Lactobacillus buchneri LN1819 (final total lactic acid bacteria application rate of 150,000 cfu/g of fresh forage). Silages were air stressed for 24 h at 28 and 42 d of storage and ensiled for 49 d before opening. Inoculation had no effect on acid end products, ethanol, number of yeasts, or aerobic stability compared with other treatments. Treatment with SSL decreased the amount of ethanol, had no effect on number of yeasts, and improved aerobic stability in a dose-dependent manner compared with other treatments. In experiment 3, WPC was untreated or treated with 2 L of SSL/t and ensiled for 5, 15, and 30 d. Treatment with SSL resulted in silage with fewer yeasts and lower concentrations of ethanol after all times of ensiling compared with untreated silage. In addition, SSL improved aerobic stability after each period of ensiling, but the effect was more at 15 and 30 d compared with 5 d of storage. Treating WPC with SSL can improve the aerobic stability of corn silage made in North America, and the effect can be observed as soon as 5 d after ensiling.     

Diet effects in the asthma treatment: A systematic review

Introduction: Obesity in asthmatic patients has important relationships with asthma control, pulmonary function, and quality of life. The objective of this study was to conduct a systematic review of the literature on the effect of diet on asthma management in adults. Methods: We searched PubMed, Embase, and Scopus (January 1948–October 2014) for randomized clinical trials that evaluated the effects of diet in adults with asthma. Results: Of 12,215 studies identified, 21 were included. A reduction in weight of at least 7.5% from baseline as a result of caloric restriction can be beneficial for improving disease control, quality of life, and pulmonary function in obese patients with asthma. A dietary pattern rich in foods with potential antioxidant effect had an impact in improving asthma control, but with little clinical significance. Studies involving antioxidant supplementation showed improvements in asthma control with magnesium supplementation and less decline in lung function with vitamin C supplementation. Studies of fatty acid supplementation demonstrated effects on weight loss and improvement of asthma control and lung function. Studies of supplementation with propolis and caffeine reported significant increases in FEV1. Conversely, studies of high dietary salt intake reported greater declines in lung function. Conclusions: The evidence shows that, for obese adults with asthma, the best dietary intervention seems to be caloric restriction, regardless of specific dietary components.