Nanogoldpharmaceutics (i) The use of colloidal gold to treat experimentally-induced arthritis in rat models; (ii) Characterization of the gold in Swarna bhasma, a microparticulate used in traditional Indian medicine

Nanosized gold particles (27 +/− 3 nm) have been proven to be effective in ameliorating the symptoms of mycobacterial-, collagen- and pristane-induced arthritis in rat models. This contrasts with the drug sodium aurothiomalate that was only effective against mycobacterial-induced arthritis but not to the same extent as Au⁰. Gold in the traditional Indian Ayurvedic medicine,Swarna bhasma (gold ash), has been characterized as globular particles of gold with an average size of 56–57 nm.     

Niobium-Base Superalloys via Powder Metallurgy Technology

JOM - This paper provides some insight into an area that has been neglected, namely the possibility of developing high-strength, niobium-base alloys by improved oxidation resistance via the...     

The atomic age challenge to steel

Some months ago the submarine Nautilus was in dock for refueling. It had traveled 60,000 miles, but the total uranium used would make a lump smaller than a light bulb. This is only one example that the Atomic Age is here with us, now! How and where does this incredible Atomic Age challenge the first and greatest of America’s basic industries?     

Rotating Heat Exchangers and the Optimization of a Heat Pump

Flow and heat transfer conditions are investigated on rotating flat plates and on blades of tangential blowers. The solution of the three dimensional boundary layer equations for rotating flat plates show that 3-D effects are of influence only in the neighborhood of the axis of rotation. The conditions outside this region can be treated as flow in a 2-D system. The measurements indicate that turbulent flow exists already at Re-values much smaller than Reclit for stationary flat plates. As a result of this, high heat transfer rates can be achieved at lower average velocities. All data taken on rotating flat plates and on the blades of a tangential blower can be correlated by a single dimensionless relationship. The results obtained by theory and measurements are used to derive design curves for the construction of a heat pump. A device built in accordance to these curves performed as predicted. Discussed are also rotating furnaces, radiators and condensers for vapor driven engines.     

Mass-Balance Model of Pulmonary Oxygen Transport

A dynamic lumped-parameter model for pulmonary gas transport has been developed to characterize the lung and predict the effect of various parameter changes. The gas side of the lung is modeled as a series and parallel arrangement of five perfectly mixed, variable-volume compartments that correspond roughly to airway and alveolar regions. The blood side of the lung is modeled as a series of perfectly mixed, constant-volume compartments that represent the pulmonary capillary bed. From nonsteady mass balances, equations are derived which yield the time course of concentration for each compartment. Model simulations indicate that the oxygen-hemoglobin reaction does not reach equilibrium in the pulmonary capillaries, an assumption commonly made in analyses of pulmonary oxygen transport. Simulations also show the extent to which breathing amplitude and rate can affect the oxygen level in the blood leaving the lung. A comparison of simulations for a normal state and chronic obstructive lung disease (COLD) with identical input conditions demonstrates that the oxygen level in the blood leaving the lung is much lower in COLD. Also, the simulations are compared with experimental findings.     

Textile Applications of Adjustable-Frequency Drives with Digital Ratio Control

The application of digital techniques to program and to process the input signals to adjustable-frequency inverters for the control of rugged ac motors is becoming widespread. It was perhaps inevitable that digital signal control would eventually be combined with the inherently digital adjustable-frequency power inverter to produce systems having high overall line speed accuracy, adjustable ``digital gearing' between sections, locked-in-step acceleration from creep to run speed, and in-train digital jogging. A short introduction to adjustable-frequency motor control is given, and the use of digital techniques for controlling adjustable-frequency inverters to produce digital speed systems is described. Early applications of the first solid-state inverters to synthetic fiber spinning and their continued use is described. Specific current applications of digitally controlled adjustable-frequency speed systems are discussed, and potential applications that demonstrate how the capabilities of such systems can be used to provide economic solutions to many textile industry drive problems are reviewed.     

Association of seed size with genotypic variation in the chemical constituents of soybeans

Ten soybean genotypes grown in 1992 with seed size ranging from 7.6 to 30.3 g/100 seeds and maturity group V or VI were selected and tested for oil and protein content and for fatty acid composition. In these germplasm, protein varied from 39.5 to 50.2%, oil, 16.3 to 21.6%, and protein plus oil, 59.7 to 67.5%. Percentages of individual fatty acids relative to total fatty acids varied as follows: palmitic, 11.0 to 12.8; stearic, 3.2 to 4.7; oleic, 17.6 to 24.2; linoleic, 51.1 to 56.3 and linolenic, 6.9 to 10.0. Seed size showed no significant correlations with individual saturated fatty acids, protein or oil content. However, significant correlations were found between seed size and individual unsaturated fatty acids: positive with oleic, and negative with linoleic and linolenic. Oil and protein content were negatively correlated with each other. Among the major fatty acids, only the unsaturated were significantly correlated with each other: negative between oleic and linoleic or linolenic, and positive between linoleic and linolenic. A subsequent study with soybeans grown in 1993 generally confirmed these findings. Variation in relative percentages of unsaturated fatty acids andr values for most pairs of relationships were even higher than those obtained from the 1992 crop. Presented at the 85th AOCS Annual Meeting and Expo, Atlanta, Georgia, May 8–12, 1994.     

Effect of alkali and alkaline earth metals on nitrogen release during temperature programmed pyrolysis of coal

Formation of HCN, NH₃, and N₂ during fixed-bed pyrolysis at 10K min⁻¹ has been studied using coal samples after partial demineralization followed by addition of metal hydroxides from aqueous systems. Without additives, NH₃ is the predominant product at ≤ 700°C, showing the two peaks in the formation rate profile, whereas N₂ is the only product at ≥ 800°C. The presence of NaOH, KOH and Ca(OH)₂ promotes considerable NH₃ formation between 450 and 600°C, but in contrast suppresses HCN formation in this region. The Ca shows the largest effect on both the promotion and suppression. It is likely that the NH₃ increased by Ca addition arises partly from HCN, but mainly from secondary reactions of tar-N. These hydroxides affect N₂ formation in quite different manners: the Na decreases the rate between 700 and 950°C, and the K changes it less significantly than the Na, but the Ca remarkably increases the rate in a low temperature region of 550–700°C. These different features are discussed in terms of solid-phase reactions of alkali metal carbonates with char-N and secondary decomposition reactions of tar-N on CaO particles. As a result, total conversion of coal-N to HCN, NH₃ and N₂ up to 1000°C increases in the sequence of Na < none < K < Ca.