Effect of channel fade rate on throughput of three GHARQ-II schemesover Rayleigh fading channel

The performance of three GHARQ-II schemes, based on punctured convolutional codes, used over a simulated Rayleigh fading channel subject to additive white Gaussian noise are compared. Various fade rates and signal to noise ratios are considered     

Ion implantation doping of OMCVD grown GaN

Doping by ion implantation using Si, O, Mg, and Ca has been studied in single crystal semi-insulating and n-type GaN grown on a-sapphire substrates. The n-and p-type dopants used in this study are Si and O; Mg and Ca, respectively. Room temperature activation of Si and O donors has been achieved after 1150°C annealing for 120 s. The activation of Mg and Ca acceptors is too low to measure at both room temperature and 300°C. Using higher doses to achieve a measurable p-type conduction increases the amount of damage created by the implantation. Rutherford back scattering measurements on this material indicate that the damage is still present even after the maximum possible heat treatment. Secondary ion mass spectrometry measurements have indicated a redistribution in the measured profiles of Mg due to annealing.     

Design and analysis of a bandwidth management framework forATM-based broadband ISDN

When designing and configuring an ATM-based B-ISDN, it remains difficult to guarantee the quality of service (QoS) for different service classes, while still allowing enough statistical sharing of bandwidth so that the network is efficiently utilized. These two goals are often conflicting. Guaranteeing QoS requires traffic isolation, as well as allocation of enough network resources (e.g., buffer space and bandwidth) to each call. However, statistical bandwidth sharing means the network resources should be occupied on demand, leading to less traffic isolation and minimal resource allocation. The authors address this problem by proposing and evaluating a network-wide bandwidth management framework in which an appropriate compromise between the two conflicting goals is achieved. Specifically, the bandwidth management framework consists of a network model and a network-wide bandwidth allocation and sharing strategy. Implementation issues related to the framework are discussed. For real-time applications the authors obtain maximum queuing delay and queue length, which are important in buffer design and VP (virtual path) routing     

Bandwidth requirements for accurate detection of direct path in multipath environment

The accurate detection of the direct path in a dense multipath environment is critical in time-based and angle-of-arrival-based location estimation techniques. It is generally assumed that an infinitely large bandwidth is helpful in the accurate detection of the direct path and high-range resolution. It is experimentally demonstrated that, for a wideband system, a bandwidth of up to 4 GHz, centred on 12.5 GHz, is sufficient for accurate detection of direct path in a typical indoor scattering environment. Additionally, the bandwidth gain, incremental range accuracy with bandwidth, is an effective indicator of the bandwidth requirements for accurate detection of the direct path.     

High-speed integrated transceivers for optical wireless

Optical wireless LANs have the potential to provide bandwidths far in excess of those available with current or planned RF networks. There are several approaches to implementing optical wireless systems, but these usually involve the integration of optical, optoelectronic, and electrical components in order to create transceivers. Such systems are necessarily complex, and the widespread use of optical wireless is likely to be dependent on the ability to fabricate the required transceiver components at low cost. A number of UK universities are currently involved in a project to demonstrate integrated optical wireless subsystems that can provide line-of-sight in-building communications at 155 Mb/s and above. The system uses two-dimensional arrays of novel microcavity LED emitters and arrays of detectors integrated with custom CMOS integrated circuits to implement tracking transceiver components. In this article we set out the basic approaches that can be used for in-building optical wireless communication and argue the need for an integrated and scalable approach to the fabrication of transceivers. Our work aimed at implementing these components, including experimental results and potential future directions, is then discussed.     

A new criterion for linear 2-port stability using a singlegeometrically derived parameter

A stability parameter, μ(S), is defined for linear two-port circuits using a geometrical approach. It is shown that μ>1 alone is necessary and sufficient for a circuit to be unconditionally stable. This single parameter can replace the dual Rollet (K>1) and auxiliary conditions for determining unconditional stability. The parameters K and μ are compared by discussing their implications in terms of mapping circles     

Restrictions on the three-class ideal observer's decision boundary lines

We are attempting to develop expressions for the coordinates of points on the three-class ideal observer's receiver operating characteristic (ROC) hypersurface as functions of the set of decision criteria used by the ideal observer. This is considerably more difficult than in the two-class classification task, because the conditional probabilities in question are not simply related to the cumulative distribution functions of the decision variables, and because the slopes and intercepts of the decision boundary lines are not independent; given the locations of two of the lines, the location of the third will be constrained depending on the other two. In this paper, we attempt to characterize those constraining relationships among the three-class ideal observer's decision boundary lines. As a result, we show that the relationship between the decision criteria and the misclassification probabilities is not one-to-one, as it is for the two-class ideal observer.     

高分辨率S／TEM提升中国先进制造能力

二月初《上海证券报》上报导了美国某家主要半导体制造商将在大连投资建设一条65nm工艺线,在最近的一些新闻中经常可以见到此     

Research on encoding and decoding of non-binary polar codes over GF(2m)

Binary Polar Codes (BPCs) have advantages of high-efficiency and capacity-achieving but suffer from large latency due to the Successive-Cancellation List (SCL) decoding. Non-Binary Polar Codes (NBPCs) have been investigated to obtain the performance gains and reduce latency under the implementation of parallel architectures for multi-bit decoding. However, most of the existing works only focus on the Reed-Solomon matrix-based NBPCs and the probability domain-based non-binary polar decoding, which lack flexible structure and have a large computation amount in the decoding process, while little attention has been paid to general non-binary kernel-based NBPCs and Log-Likelihood Ratio (LLR) based decoding methods. In this paper, we consider a scheme of NBPCs with a general structure over GF(2^m). Specifically, we pursue a detailed Monte-Carlo simulation implementation to determine the construction for proposed NBPCs. For non-binary polar decoding, an SCL decoding based on LLRs is proposed for NBPCs, which can be implemented with non-binary kernels of arbitrary size. Moreover, we propose a Perfect Polarization-Based SCL (PPB-SCL) algorithm based on LLRs to reduce decoding complexity by deriving a new update function of path metric for NBPCs and eliminating the path splitting process at perfect polarized (i.e., highly reliable) positions. Simulation results show that the bit error rate of the proposed NBPCs significantly outperforms that of BPCs. In addition, the proposed PPB-SCL decoding obtains about a 40% complexity reduction of SCL decoding for NBPCs.     

The hypervolume under the ROC hypersurface of "near-guessing" and "near-perfect" observers in N-class classification tasks

We express the performance of the N-class "guessing" observer in terms of the N2-N conditional probabilities which make up an N-class receiver operating characteristic (ROC) space, in a formulation in which sensitivities are eliminated in constructing the ROC space (equivalent to using false-negative fraction and false-positive fraction in a two-class task). We then show that the "guessing" observer's performance in terms of these conditional probabilities is completely described by a degenerate hypersurface with only N-1 degrees of freedom (as opposed to the N2-N-1 required, in general, to achieve a true hypersurface in such a ROC space). It readily follows that the hypervolume under such a degenerate hypersurface must be zero when N > 2. We then consider a "near-guessing" task; that is, a task in which the N underlying data probability density functions (pdfs) are nearly identical, controlled by N-1 parameters which may vary continuously to zero (at which point the pdfs become identical). With this approach, we show that the hypervolume under the ROC hypersurface of an observer in an N-class classification task tends continuously to zero as the underlying data pdfs converge continuously to identity (a "guessing" task). The hypervolume under the ROC hypersurface of a "perfect" ideal observer (in a task in which the N data pdfs never overlap) is also found to be zero in the ROC space formulation under consideration. This suggests that hypervolume may not be a useful performance metric in N-class classification tasks for N > 2, despite the utility of the area under the ROC curve for two-class tasks.