Binding of mutated Ras- and p53-derived peptides to HLA-DR molecules

We investigated retrospectively 132 cases of open wedge high tibial osteotomy using an external fixation device, concentrating on the rate of neurological complications. One group of patients underwent surgery according to the conventional technique (n = 89). The rate of transient neurological complications was 15.7%; 7 months after surgery the rate of persistent deficits was 12.4%. For the second group (n = 43) a modified surgical technique was used that lowered the complication rate significantly (transient deficits 14%, persistent deficits 4.7%). In the modified technique the osteotomy is not performed in the conventional way using an oscillating saw but through consecutive drill holes of increasing diameter followed by osteoclasis. The lower complication rate in the second group is mainly due to the less extensive approach that leads to a smaller number of postoperative tibialis anterior syndromes (type B lesion). No differences were found with type C lesions (extension deficit of D1). No complete peroneal nerve palsy (type A) occurred in either group. We conclude that the reduction of neurological complications in group 2 is related to the less extensive approach of the proposed technique.     

Far-infrared pump-probe measurement of the lifetime of the 2p−1 shallow donor level in n-GaAs

The low temperature lifetime of electrons excited in the 2p^?1 donor level of n-GaAs has been studied in a far-infrared pump-probe experiment. The measurement has been carried out using a pulsed far-infrared molecular gas laser working at a wavelength of 292µm, with the sample in a magnetic field of 5.1 T, resonant with the 1s_o?2p^?1 transition. Two FIR pulses are sliced from one FIR-laser pulse by means of optical switching techniques using two Q-switched Nd:YAG lasers. The first pulse is used to saturate the transition, while the second pulse probes the return of the population in the excited state towards thermal equilibrium as a function of the time delay after the excitation pulse. The value of 350±50 ns found for the lifetime falls in line with CW saturation results on materials with other doping concentrations.     

Neurocontrol for lateral vehicle guidance

A solution to autonomous lateral vehicle guidance using a neurocontroller that can learn from measured human-driving data without knowledge of the physical car parameters is discussed. Simulations and practical tests confirm that a small-size feedforward autonomous neural network (21 neurons) can learn to steer a vehicle at high speeds only from looking at human-driving examples. In this way, the network learns the total closed-loop behavior, including the nonlinear dynamics of the vehicle and the driver's individual driving style. The main result of practical investigations is that the neutral controller trained on human-driving examples exhibits an aperiodic behavior that does not vanish at higher speeds (tests performed up to 130 km/h) and produces fewer lateral deviations than the linear state controller     

Effects of forced power transfer on high speed generator-loadsystems

A computer-aided method for investigating disturbances due to the forced paralleling of out of phase high speed salient pole AC generator systems feeding isolated loads is presented. The method is used to predict the system performance including the reverse voltage across the rotating bridge rectifier of the field exciter. This paper presents the fundamentals and the modeling approach used in the development of this method. In addition, the results of using this approach to compute the machine parameters under different load conditions including saturation effects due to magnetic material nonlinearities and space harmonics effects due to machine geometry and winding layouts are presented. The computed parameters are validated by comparison to test data. These parameters form the main data for simulating the forced paralleling of out of phase high speed salient pole AC generator systems feeding isolated loads. Further, the results of using this modeling approach in a case study to predict the system performance due to forced power transfer are summarized and are shown to be in good agreement with test data     

Vessel wall detection and blood noise reduction in intravascularultrasound imaging

Scattering from blood limits the contrast between the vessel wall and the lumen in intravascular ultrasound imaging. This makes it difficult to localize the vessel wall, especially on still images. This paper presents a method for automatic detection of vessel walls and reduction of blood noise based on correlation of the RF-signal between adjacent frames. The ultrasound RF-signal is quadrature demodulated, digitized, stored in memory, and transferred to a computer for processing and analysis. The absolute value of the cross-correlation coefficient between two adjacent frames is used to differentiate between stationary and fluctuating signals. Models and numerical calculations presented in this work indicate that the cross-correlation coefficient obtained from a radially dilating vessel wall will be larger than 0.8 under standard 20 MHz imaging conditions. The corresponding value from blood is less than 0.2 for blood velocities exceeding 0.5 cm s^-1 . The blood-noise filter is based on detecting this difference in correlation and displays vessel wall regions with no modifications, while regions detected as blood are rejected. A simplified vessel-wall detector that is suitable for real-time implementation is proposed. The performance of this detector and the blood noise filter are demonstrated by in vitro experiments     

A dislocation shielding prediction of the toughness transition during cleavage of semibrittle crystals

An interconnected set of observations assesses current equilibrium models of the ductile-brittle-transition temperature (DBTT). This involvesin situ transmission electron microscopy (TEM) studies of crack-tip dislocations in single and polycrystals and bulk fracture toughness tests at various temperatures. Beyond K_I values of 8 MPa · m^1/2 in both iron-base single and polycrystals, large numbers of redundant dislocations are created, as postulated recently by Weertman. [38] Still, the necessary shielding dislocations, as required by equilibrium, can be detected at values as high as 20 and 40 MPa · m^1/2 byex situ TEM and electron channeling, respectively. In addition, the close approach of dislocations to the crack tip in some of the studies, as opposed to others, suggests that large dislocation free zones (DFZ) are a thin-film artifact. However, a failure criterion based partly on the Rice-Thomson model’21 is both consistent with the absence of a large DFZ and observed fracture toughness variations with test temperature. It is emphasized that this toughness transition is entirely in the semibrittle regime where cleavage is the failure mode. Nevertheless,K _lc values increase from 3 to 60 MPa·m^1/2 with an increase in test temperature. This article is based on a presentation made in the symposium “Quasi-Brittle Fracture” presented during the TMS fall meeting, Cincinnati, OH, October 21–24, 1991, under the auspices of the TMS Mechanical Metallurgy Committee and the ASM/MSD Flow and Fracture Committee.     

Superconductivity and magnetism in niobium doped YBa2Cu3O7 Related high Tc ceramics

Magnetic characterization has been performed on the members of the cuprateniobate RBa₂Cu₂NbO₈ (R = Pr, Nd, and La) series and R_1.5Ce_0.5Sr₂Cu₂NbO₁₀ (R = Pr, Eu, Nd, and Sm) series. The PrBCNO samples show a signature in the magnetization of a magnetic ordering at 12K. The PrCSCNO sample is nonsuperconducting and shows two distinct orderings at 17K and 53K. No such magnetic phase transition is observed down to 2K in the Nd and La based RBCNO materials or the Nd, Sm, and Eu based RCSCNO materials. Measurements of the lower critical field curve, dc irreversibility line, and critical curent densities are reported for each of the superconducting NdCSCNO, SmCSCNO, and EuCSCNO compounds.     

Transport properties of oxygen-deficient YBa2Cu3O7−x thin films

We report on measurements of the in-plane resistivityρ and Hall coefficientR _H (B∥c) of various oxygen-deficient epitaxial films of YBa₂Cu₃O_7?x in the normal state. The superconducting transition temperaturesT _c of the samples vary from 14 to 90 K. Both the resistivity and the Hall coefficient exhibit a strong dependence on the oxygen content and the temperature. Asx increases,T _c decreases continuously, whileρ andR _H gradually increase in magnitude. Furthermore, also the characteristic linear dependences ofραT andR _Hα T ^?1 of the highly doped compounds changes to a nonlinear behavior for the samples withT _c lower than 60 K. The unusual doping and temperature dependence ofR _H will be compared to the predictions of our calculations, based on a two-dimensional tight-binding model using the relaxation-time approximation. The model considers also the next-nearest-neighbor hopping, which strongly influences the predicted Hall coefficient. Additionally, the cotangent of the Hall angle cot(Θ _H ) is discussed in the framework of the two-dimensional Luttinger liquid theory.     

Structural determination of N-2''-hydroxyoctadecenoyl-1-O-beta-D-glucopyranosyl-9-methyl-4, 8-sphingadienine from species of Aspergillus

The barrier function, surface biochemistry, and morphology of confluent monolayers of endothelial cells isolated from different segments of the bovine lung vasculature [microvessels (BLMVEC), vein (BPVEC) and artery (BPAEC)] were grown in culture and compared. A number of common cell surface proteins were identified along with two proteins of 46 and 48 kDa found exclusively on BPVEC. Lectin affinity chromatography revealed multiple glycosylation differences. The lectins, Arachis hypogaea (AHA) and Lycopersicum esculentum (LEA) agglutinins, interacted with several glycoproteins of BLMVEC but not of BPAEC. Bandeiraea simplicifolia (BS-1) and Caragana arborescens (CAA) agglutinins recognized several glycoproteins of BPVEC and BPAEC but not BLMVEC. Permeabilities were much lower for BLMVEC than BPAEC or BPVEC monolayers, with a range of about 16-fold less for sucrose to 2-fold less for albumin. Electron microscopy revealed that BLMVEC have a greater surface density of plasmalemmal vesicles (approximately 4-fold) and more extensively developed intercellular junctions with more focal membrane adhesion sites per junction (approximately 9-fold) than the other cells. We conclude that: i) BLMVEC monolayers form a much more restrictive barrier to molecular transport as a result of the tighter junctional formation; and ii) endothelial surface glycoproteins may be differentially glycosylated depending on their segmental location within the vasculature.