Novel Tight Closed-Form Bounds for the Symbol Error Rate of EGC and MRC Diversity Receivers Employing Linear Modulations Over \alpha -\mu Fading

In this paper, we propose novel lower and upper bounds on the average symbol error rate (SER) of the dual-branch maximal-ratio combining and equal-gain combining diversity receivers assuming independent branches. \(M\) -ary pulse amplitude modulation and \(M\) -ary phase shift keying schemes are employed and operation over the \(\alpha -\mu \) fading channel is assumed. The proposed bounds are given in closed form and are very simple to calculate as they are composed of a double finite summation of basic functions that are readily available in the commercial software packages. Furthermore, the proposed bounds are valid for any combination of the parameters \(\alpha \) and \(\mu \) as well as \(M\) . Numerical results presented show that the proposed bounds are very tight when compared to the exact SER obtained via performing the exact integrations numerically making them an attractive much simpler alternative for SER evaluation studies.     

On the Performance of FFT/DWT/DCT-based OFDM Systems with Chaotic Interleaving and Channel Estimation Algorithms

The efficiency of data transmission over fading channels in orthogonal frequency division multiplexing (OFDM) systems depends on the employed interleaving method. In this study, we propose an improved chaotic interleaving scheme which aims to improve the performance of OFDM system under fading channel. In the proposed scheme, the binary data is interleaved with chaotic Baker map prior to the modulation process. In the sequel, significant degree of encryption is being added during data transmission. The performance of the proposed approach is tested on the conventional fast Fourier transform OFDM, discrete wavelet transform OFDM, and discrete cosine transform OFDM with and without chaotic interleaving. Furthermore, an expectation–maximization (EM) algorithm is proposed for improving channel impulse response (CIR) estimation based on a maximum likelihood principle. The proposed scheme makes use of EM algorithm to update the channel estimates until convergence is reached. The simulation results show the efficiency of the proposed algorithms under Rayleigh fading environments where the symbol error rate essentially coincides with that of the perfect channel case after the fifth EM iteration.     

Fiber optic applications of multiple quantum well electroabsorption modulators

Electroabsorption modulators (eam) have proved to be very attractive both as optical sources (monolithically integrated NRZ transmitters andrz pulse generators) as well as for very fast signal processing (demultiplexing, regeneration, wavelength conversion,...). Their design criteria, technology and implementation in future networks are reviewed, and the main issues are discussed.     

Java multimedia telecollaboration

Using Java-based tools in multimedia collaborative environments accessed over the Internet can increase an application's client base. Most operating systems support Java, and its "compile once-run everywhere" architecture is easy to maintain and update. The Java-based tools presented here let users share Internet resources, including resources originally designed for single use.     

Long Distance Enhancement of Nonlinear Optical Properties Using Low Concentration of Plasmonic Nanostructures in Dye Doped Monolithic Sol–Gel Materials

Monolithic sol–gel silica composites incorporating platinum‐based chromophores and various types of gold nanoparticles (AuNPs) are prepared and polished to high optical quality. Their photophysical properties are investigated. The glass materials show well‐defined localized surface plasmon resonance (SPR) absorbance from the visible to NIR. No redshifts of the AuNP plasmon absorption peaks due to the increase in nanoparticle doping concentration are observed in the glasses, proving that no or very small SPR coupling effects occur between the AuNPs. At 600 nm excitation, but not at 532 nm, the AuNPs improve the nonlinear absorption performance of glasses codoped with 50 × 10^?3 m of a Pt‐acetylide chromophore. The glasses doped with lower concentrations of AuNPs (2–5 μm average distance) and 50 × 10^?3 m in chromophore, show a marked improvement in nonlinear absorption, with no or only small improvement for the more highly AuNP doped glasses. This study shows the importance of excitation wavelength and nanoparticle concentration for composite systems employing AuNPs to improve two‐photon absorption of chromophores.     

Sprayed CeO2 thin films for electrochromic applications

Cerium dioxide (CeO₂) thin films were prepared by spray pyrolysis using hydrated cerium chloride (CeCl₃·7H₂O) as source compound. The films prepared at substrate temperatures below 300°C were amorphous, while those prepared at optimal conditions (T_s=500°C,s=5 ml/min) were polycrystalline, cubic in structure, preferentially oriented along the (2 0 0) direction and exhibited a transmittance value greater than 80% in the visible range. The cyclic voltammetry study showed that films of CeO₂ deposited on ITO pre-coated glass substrates were capable of charge insertion/extraction when immersed in an electrolyte of propylene carbonate with 1 M LiClO₄.These films also remained fully transparent after Li+ intercalation/deintercalation.     

Magnetically Guided Self‐Assembly and Coding of 3D Living Architectures

In nature, cells self‐assemble at the microscale into complex functional configurations. This mechanism is increasingly exploited to assemble biofidelic biological systems in vitro. However, precise coding of 3D multicellular living materials is challenging due to their architectural complexity and spatiotemporal heterogeneity. Therefore, there is an unmet need for an effective assembly method with deterministic control on the biomanufacturing of functional living systems, which can be used to model physiological and pathological behavior. Here, a universal system is presented for 3D assembly and coding of cells into complex living architectures. In this system, a gadolinium‐based nonionic paramagnetic agent is used in conjunction with magnetic fields to levitate and assemble cells. Thus, living materials are fabricated with controlled geometry and organization and imaged in situ in real time, preserving viability and functional properties. The developed method provides an innovative direction to monitor and guide the reconfigurability of living materials temporally and spatially in 3D, which can enable the study of transient biological mechanisms. This platform offers broad applications in numerous fields, such as 3D bioprinting and bottom‐up tissue engineering, as well as drug discovery, developmental biology, neuroscience, and cancer research.     

Study of woven fabric shear behaviour

The paper presents the shear frame test with a new method of gripping the fabric sample to describe the shear behaviour of fabrics used in the garment industry under high shear strain conditions (maximum shear angles of 20°). This shear frame test was also used to compare between hysteresis curves given by the Kawabata evaluation system (KES) test, the bias extension test and the shear frame test for 10 woven fabrics. The linear viscoelastic theory was used to analyse the shear relaxation behaviour of the woven fabrics. In addition, in this study, the kernel function of the generalised Maxwell model has been used to describe the viscoelastic properties of the fabrics.     

Short communication: Principal components and factor analytic models for test-day milk yield in Brazilian Holstein cattle

A total of 46,089 individual monthly test-day (TD) milk yields (10 test-days), from 7,331 complete first lactations of Holstein cattle were analyzed. A standard multivariate analysis (MV), reduced rank analyses fitting the first 2, 3, and 4 genetic principal components (PC2, PC3, PC4), and analyses that fitted a factor analytic structure considering 2, 3, and 4 factors (FAS2, FAS3, FAS4), were carried out. The models included the random animal genetic effect and fixed effects of the contemporary groups (herd-year-month of test-day), age of cow (linear and quadratic effects), and days in milk (linear effect). The residual covariance matrix was assumed to have full rank. Moreover, 2 random regression models were applied. Variance components were estimated by restricted maximum likelihood method. The heritability estimates ranged from 0.11 to 0.24. The genetic correlation estimates between TD obtained with the PC2 model were higher than those obtained with the MV model, especially on adjacent test-days at the end of lactation close to unity. The results indicate that for the data considered in this study, only 2 principal components are required to summarize the bulk of genetic variation among the 10 traits.