On the generation of test patterns for multiple faults

This article presents a new method to generate test patterns for multiple stuck-at faults in combinational circuits. We assume the presence of all multiple faults of all multiplicities and we do not resort to their explicit enumeration: the target fault is a single component of possibly several multiple faults. New line and gate models are introduced to handle multiple fault effect propagation through the circuits. The method tries to generate test conditions that propagate the effect of the target fault to primary outputs. When these conditions are fulfilled, the input vector is a test for the target fault and it is guaranteed that all multiple faults of all multiplicities containing the target fault as component are also detected. The method uses similar techniques to those in FAN and SOCRATES algorithms to guide the search part of the algorithm, and includes several new heuristics to enhance the performance and fault detection capability. Experiments performed on the ISCAS'85 benchmark circuits show that test sets for multiple faults can be generated with high fault coverage and a reasonable increase in cost over test generation for single stuck-at faults.     

Modified tracking loop for DS spread spectrum systems

A nonconventional pseudo-noise (PN) code tracking loop for direct sequence (DS) spread spectrum systems is presented. It solves problems of component imbalance while maintaining hardware simplicity.<>     

Characterization and correlation of crude oils from some wells in the North Western Desert,Egypt

Characterization and correlation of crude oils from some wells in the North Western Desert, based on six crude oil samples, were studied by different analytical techniques, including API gravity, sulfur content, nickel and vanadium, bulk compositions and saturated fraction obtained from gas chromatography have been studied. The results show that the crude oils are normal to medium aromatic oils, with high API gravity and high sulfur content. V, Ni, V/Ni and V/(V + Ni) reflecting oils might be sourced from non-clastic source rocks, possibly carbonates, deposited under anoxic-suboxic conditions. Bulk compositions revealing that the crude oils were derived from marine organic sources. While, the paraffins and naphthenes percent indicates that the oils belong to paraffinic to naphthenic oil types, deposited in slightly anoxic to suboxic conditions and contained marine organic matter. Thermal maturity data showed that the oil samples were generated from mature source rocks. This indicates the studied oil samples are well correlated with each other, where they are similar in their oil type maturation and source depositional environments.     

Petrographic and petrophysical characterization of some Paleozoic rocks,Um Bogma area,Southwest Sinai,Egypt

Sixty-two samples were collected from the five formations at Um Bogma area, (Southwest Sinai, Egypt). Nine samples were collected from Sarabit El Khedim Formation, ten samples were collected from Abu Hamata Formation, eighteen samples were collected from Adedia Formation, eight samples were collected from Um Bogma Formation and eighteen samples were collected from Abu Thora Formation.The Paleozoic rocks at Um Bogma area, consist mainly of sandstones, siltstones, shales, limestone and dolostones, which are unconformably overlie igneous and metamorphic rocks (granite, diorite and gneiss) of Precambrian age.The petrographic studies were applied to identify different rock units, different facies and its diagenetic history and to reveal its effect on the storage capacity properties. Different types of porosity (oversized, intergranular, fracture and vuggy porosities) have been identified based on the petrographic investigation of the studied thin sections.The Paleozoic sandstone rock samples are characterized by porosity average about 19% for Facies 1 (quartz wack) and about 18%for Facies 2 (quartz arenite) and permeability average 420?mD for Facies 1 (quartz wack) and 690?mD for Facies 2 (quartz arenite), so these rocks can be considered as good reservoir rocks. The Paleozoic carbonate rock samples (Facies 3) are characterized by poor porosity (less than 7%) and very low permeability (less than 0.5?mD), which caused by matrix and diagenetic processes and refer to bad reservoir rocks.Porosity can be linked to the two derived electrical properties (formation resistivity factor and electrical tortuosity) of the studied Paleozoic rocks at Um Bogma area. The electrical tortuosity has significant effects on both permeability and formation resistivity factor. The permeability decreases with increasing electrical tortuosity and the relation between both of them is inverse relationship with good coefficient of correlation. The permeability decreases with increasing electrical tortuosity and the relations between both of them are inverse relationships with high coefficient of correlation. The formation resistivity factor increases with increasing electrical tortuosity and the relations between both of them are positive relationships with a fair to very high coefficient of correlation.     

A Survey on IP Watermarking Techniques

Intellectual property (IP) block reuse is essential for facilitating the design process of system-on-a-chip. Sharing IP designs poses significant high security risks. Recently, digital watermarking emerged as a candidate solution for copyright protection of IP blocks. In this paper, we survey and classify different techniques used for watermarking IP designs. To this end, we defined several evaluation criteria, which can also be used as a benchmark for new IP watermarking developments. Furthermore, we established a comprehensive set of requirements for future IP watermarking techniques.     

The impact of metal-1 plasma processing-induced hot carrierinjection on the characteristics and reliability of n-MOSFETs

We report on plasma processing-induced damage to sub-half-micron n-MOSFETs that is invoked by potential differences between device terminals during metal-1 plasma processing. The damage mechanism is identified as hot carrier (HC) injection promoted by the layout of metal-1 interconnect. Using conventional and modified charge pumping techniques as well as transistor parameter measurements, we also investigate the impact of the damage on device reliability by applying Fowler-Nordheim (FN) and hot carrier stresses. The results show the severe impact of this damage on device reliability, which is attributed to trapping of positive charge at the drain edge that is enough to shorten the device channel     

Rapid thermal annealing applied to the optimization of titanium oxide arc

In this work, rapid thermal annealing (RTA) in the 400–700°C range is used to adjust simultaneously the index and thickness of titanium oxide layers in order to achieve an antireflection coating (ARC) in industrial conditions (large solar cells with a high throughput capability). The technique used for high production rate and low cost coating process is the atmospheric pressure chemical vapor deposition (APCVD) at low temperature.Titanium oxide layers are obtained from the hydrolysis of two precursors, namely the tetraisopropoxide titanate (TPT) and the titanium tetrachloride. In the first case, on silicon substrates at 150°C, we have obtained refractive indices of 1.8–1.9 with layer thicknesses in the range 70–100 nm. In the second case, at 100°C, the refractive index is 2.1–2.2 as deposited and the thickness in the same range. After RTA lasting 120 s at 700°C, the refractive index is 2.25 and the thickness is decreased by 40% with the first precursor, while with chloride, the index increases until 2.4 and the thickness is decreased by 30%. These results are discussed by means of X-ray diffraction and SIMS analysis.     

Channel access and interference issues in multi-code DS-CDMA wireless packet (ATM) networks

Multi-Code Direct-Sequence Code-Division-Multiple-Access (MC-CDMA) has been proposed as a flexible multiple access scheme for wireless packet networks that support a large variety of mobiles with different and even time-varying rates. Using MC-CDMA, traffic streams with significantly different transmission rates can be easily integrated into a unified architecture, with all the transmissions occupying the same bandwidth and having the same spread spectrum processing gain. In this paper, we address medium-access and interference issues in MC-CDMA wireless packet networks. For medium access, we propose and study Multi-Code CDMA (MC-CDMA) with Distributed-Queueing Request Update Multiple Access (DQRUMA) to form a unified bandwidth-on-demand fair-sharing platform for multi-rate wireless services. DQRUMA is an efficient demand-assignment multiple access protocol for wireless access and scheduling. Pseudo-Noise (PN) codes (primary codes) and optimal power levels are allocated to the mobiles on a slot-by-slot basis, and a Maximum Capacity Power Allocation (MCPA) criterion exploits the sub-code concatenation property of the MC-CDMA transmission. Simulation results show that the system provides close to ideal-access performance for multi-rate mobiles, both with homogeneous traffic characteristics and with a mix of heterogeneous traffic characteristics. Finally, we analyze the effects of MC-CDMA intercell interference on the reverse link (i.e., mobile to cell site) and investigate interference reduction by using the Maximum Capacity Power Allocation (MCPA) criterion. Our results show significant reduction in reverse-link MC-CDMA intercell interference is possible using the MCPA criterion.     

Free convection performance of circular cavities having two active curved vertical sides and two inactive curved horizontal sides

A detailed review of the archival reveals that the heat transfer and fluid flow characteristics of circular cavities have not been investigated so far and of course their physical features are not understood. A prominent application of these cavities arises in the miniaturized packaging of electronic components that are subject to strict constraints. This paper addresses primarily steady-state laminar natural convection of air in a circular cavity of diameter H inscribed in a square cavity of side H where the corresponding sides are in contact at four points. A third cavity, an arc–square cavity whose shape lies between the square and circular cavity shapes is included in the analysis. The finite volume method is used to perform the numerical simulations. The methodology takes into account the second-order-accurate QUICK scheme for the discretization of the convective term, whereas the pressure–velocity coupling is handled with the SIMPLE scheme. Since the air is not assumed a Boussinesq gas, it was decided to take all thermophysical properties as temperature-dependent. In the end, it has been demonstrated that the circular cavity possesses a superior balance between heat transfer enhancement and size in cross-section area in comparison with the standard square cavity. The side of the square cavity is similar to the diameter of the circular cavity.