Printing cotton fabrics with reactive dyes of high reactivity from an acidic printing paste

The behaviour of reactive dyes of high reactivity during the printing process of 100% cotton fabrics from an alkaline and acidic printing paste was studied in detail. The printing pastes were stored for different periods of time and then the fabrics were printed. The samples were subjected to two methods of fixation, the first by steaming and the second by thermofixation. The effects of different factors such as alkali and acid concentration, storage time of the printing pastes and method of fixation on the K/S values of the prints were investigated. The fastness properties of the printed areas were also measured to determine the improvement obtained by acidic printing with high-reactivity reactive dyes on cotton fabrics.     

Interaction of La3+ and Ce4+ with polyethylene and polypropylene polymeric matrices

The different modes of interaction of La³⁺ and Ce⁴⁺ as simulated radioactive lanthanides found in the backend of the nuclear fuel cycle with polyethylene and polypropylene macromolecules were considered. The various compositions were characterized before and after irradiation at different gamma ray doses. The mechanical properties including stress–strain parameters were also tested. The morphological and mechanical behaviors of the various composites were different from those of the corresponding pure polymers and affected by the chemistry of the interacting elements. Besides, the leaching characteristics were carried out using the short‐ and long‐term procedure; the leaching rates were evaluated as an index for immobilization of these lanthanides. Two semiempirical models were applied to find out the dominant leaching mechanism of La³⁺ and Ce⁴⁺. Dissolution associated with diffusion was the dominant leaching path and the elemental leaching characteristics depended upon its solubility in water. Diffusion coefficients and dissolution rate constants, the main parameters in the long‐term prediction model, were obtained using short‐ and long‐term experimental data. The model was found to be useful in predicting the long‐term behavior of such elements to assess the stability of the used waste forms. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 2141–2151, 2007     

Investigation of conductivity characteristics of nitrile butadiene rubber vulcanizates filled with semiconducting carbide ceramic

SiC‐ and B₄C‐filled NBR rubber composites were prepared with various volume fractions of filler by a conventional roll‐mill method. The morphological structures of the NBR–SiC and NBR–B₄C composites were analyzed by scanning electron microscopy. The dependence of room‐temperature volume resistivity (ρ_v) on the concentration of filler in the two systems was studied. In addition, variation in the number of current carriers (n), mobility carriers (μ), dielectric constant (ε), and dielectric loss factor (tan δ) on filler concentration in the two systems were investigated in detail. The applicability of composites as negative temperature coefficient (NTCR) linear thermistors was studied by the dependence of volume resistivity on temperature. The resistivity showed negative temperature dependence and changed linearly with temperature parallel. The conduction mechanism of the conductivity of the two composites was analyzed in terms of the computed activation energy and hopping energy. Change in volume resistivity as a function of frequency for the two systems was also investigated. Finally, the dependence of volume resistivity on applied pressure and possible real applications of these composites as transducers in pressure sensors were also studied. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 2158–2165, 2007     

Lignin‐based polycondensation resins for wood adhesives

Lignin‐based wood adhesives are obtained that satisfy the requirements of relevant international standards for the manufacture of exterior‐grade wood particleboard. Formulations based on low molecular mass lignin and presenting an increase in the relative proportion of reactive points yield better results than the higher molecular mass lignin used in the past. These lignins allow a higher proportion of hydroxymethylation during preparation of methylolated lignins. These lignin‐based adhesives also yield acceptable results at particleboard pressing times that are sufficiently low to be of industrial significance. Lignin‐based wood adhesives, in which a nonvolatile nontoxic aldehyde (glyoxal) is substituted for formaldehyde in their preparation, are prepared and tested for application to wood panels such as particleboard. The adhesives yield good internal bond strength results for the panels, which are good enough to comfortably pass relevant international standard specifications for exterior‐grade panels. The adhesives also show sufficient reactivity to yield panels in press times comparable to that of formaldehyde‐based commercial adhesives. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 1690–1699, 2007     

Chitosan phosphate induced better thermal characteristics to cotton fabric

Chitosan phosphate was prepared and applied at different concentrations with and without low formaldehyde N‐methylol finishing agent (resin) to cotton fabrics. Chitosan phosphate was characterized by FTIR, nitrogen content, and phosphorus content. The so‐treated fabrics were monitored for thermogravimetric analysis (maximum decomposition temperature and residue contents after decomposition), nitrogen content, phosphorus content, tensile strength, and elongation at break. Results indicate that extent of reaction of chitosan phosphate with the cotton fabric relies on concentration of the former; increasing the concentration of the resin has practically no effect on this reaction though the resin functions as a chemical bridge between the chitosan phosphate and the cotton fabric. On the other hand, the nitrogen of the resin and the phosphorus of chitosan undergo synergetic effect and enhance the thermal properties of the treated cotton. Strength properties display higher values in the presence than in the absence of chitosan phosphate when the latter was used along with the resin. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 2021–2026, 2007     

Amelioration of acrylonitrile–butadiene copolymer properties using natural rubber graft p‐aminophenol

A two‐roll mill machine was used for the grafting of p‐aminophenol (pAP) onto natural rubber (NR). The prepared NR graft p‐aminphenol (NR‐g‐pAP) was characterized by ¹H NMR and IR spectroscopy techniques. The goal of this article is to study the effect of commercial antioxidants, N‐phenyl‐N′‐(1,3‐dimethylbutyl)‐p‐phenylenediamine (6PPD) and N‐phenyl‐N′‐isopropyl‐p‐phenylenediamine (IPPD), and the prepared NR‐g‐pAP, on the mechanical properties of acrylonitrile–butadiene (NBR) vulcanizates, the fluid compatibility of NBR vulcanizates, the hydraulic brake and clutch fluid dot, the diffusion out for NBR vulcanizate components, and the compression recovery of NBR vulcanizates. This study indicates that the NBR copolymer vulcanizate which contains the prepared NR‐g‐pAP has good protection against mechanical stress and the diffusion out of NBR vulcanizate components. The 6PPD and the prepared NR‐g‐pAP ameliorates the fluid compatibility of the oil seals, which is based on NBR as elastomer, and the hydraulic brake and clutch fluid dot. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Grafting poly(t‐butyl acrylate) to poly(allylamine) by inverse microemulsion radical polymerization: From comb‐polymer to amphiphilic shell crosslinked polymer nanocapsule

An interfacial grafting radical polymerization method for amphiphilic comb copolymer and shell crosslinked polymer nanocapsules was reported. Macropolyradicals on a water soluble long chain polyamine were generated with hydrogen peroxide in the water phase and subsequent grafting radical polymerization of a vinylic monomer at the water/oil interface proceeded at 65°C. In the presence of a crosslinker, the resulting graft copolymer formed a defined core‐shell structure with hydrophilic aqueous core functionalized by the polyamine and a hydrophobic crosslinked polymer shell. The structure of the core‐shell material was characterized by NMR, FTIR, DSC, TGA, SEM, TEM, and the mechanism of the graft polymerization is proposed. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 1905–1911, 2007     

Biodegradation of low‐density polyethylene/thermoplastic starch foams before and after electron beam irradiation

Foamy low‐density polyethylene/plasticized starch (LDPE/PLST) blends at different compositions were produced in the presence of azodicarbonamide (ACA) compound as foaming agent. The LDPE/PLST blends before and after electron beam irradiation were investigated in terms of mechanical properties, bulk density, and structure morphology. Moreover, the biodegradability of these materials was evaluated by the soil burial test for 2 months, in which the buried sheets were also examined by scanning electron microscopy (SEM). The results showed that the increase of PLST content from 24 to 30% was accompanied by a decrease in the yield and break stresses of 10 and 20% for the unirradiated blends without the foaming agent, respectively. Further decrease in these mechanical parameters was observed after the foaming process. The bulk density, void fraction, cell size measurements as well as the examination by SEM illustrate clearly the cell growth of the foam structure. The soil burial test and SEM micrographs indicate the growth of microorganisms overall the blend sheets and that the blend was completely damaged after two months of burying. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Molecular weight studies of the γ‐irradiation degradation of poly(methyl methacrylate) doped with poly(p‐sulfanilamide)

The protection of some poly(methyl methacrylate) (PMMA) samples against γ rays was investigated in the absence and presence of poly(p‐sulfanilamide). Pure PMMA (without additives) and PMMA–poly(p‐sulfanilamide) blend samples were irradiated with γ rays for different exposure doses (5, 15, 25, 35, 50, 75, and 100 kGy). The viscosity‐average molecular weights were determined and thin‐layer chromatography measurements were carried out after each irradiation dose. The maximum protection against γ rays was found when 1% poly(p‐sulfanilamide) was used. The radiation chemical yield for main scission (G_s) was calculated and had lower values in the case of 1% poly(p‐sulfanilamide). The energy absorption per scission was maximum for 1% poly(p‐sulfanilamide), and this confirmed the obtained G_s data. From thin‐layer chromatography studies, it was observed that both the retention factor (R_f) values and polydispersity of the PMMA samples increased with an increasing exposure dose. The effect of γ irradiation on PMMA films doped with 1% poly(p‐sulfanilamide) was investigated with UV spectroscopy after the extraction of the additives. A change in the intensity of the absorption bands with an increasing irradiation dose was recorded. It is suggested that PMMA films doped with this type of polymer can be used as dosimeters. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Pre-treatment by dry ice blasting for adhesive bonding

In recent years, the constant development of adhesives and coatings has contributed to the establishment of the adhesive and coating technology in several fields. Based on findings in macro-molecular chemistry, the cohesive strength, e.g. the internal strength of adhesives, has been enhanced continuously. In contrast to the adhesive strength, the mechanical, chemical and physical adhesion, the cohesive strength is relatively strong. As a consequence, adhesion is usually the weakest link of an adhesive bond, thus, most often it is adhesive fracture that can be observed. Pre-treatment and the use of so-called coupling reagents represent an approach to improve the adhesive strength. The paper presents dry ice blasting as a pre-treatment process and a process model with which the reasons for the increased adhesive strength can be clarified. With respect to the relevant blasting parameters, the effects of a pre-treatment with dry ice blasting on roughness, surface topography, specific surface, mechanical activation, surface energy and chemical composition depending on relevant parameters have been determined.