Optimal policies for integrating heterogeneous services on isdn channels

A technique for the classification and evaluation of hierarchical access integration policies of ISDN channels is proposed. The essence of the basic control decisions based on several parameters of the servers and channel is captured in a single priority-based-layered model of multiple queues. We solve for the resulting delay of different policies and investigate the performance in one tractable limit of this model. Using our understanding of the problem parameters and their interaction, we propose a number of heuristic policies for the general model. The results of the general problem complexity investigations suggest the use of simulation models. Problem parameters considered are channel acceptable access delay value, number of servers needed, and flow duration time of a request. Preemptive and non-pre-emptive policies on queued traffic are considered. Performance considers average delay, delay variation and channel utilization. Simulation data on these policies suggest that policies that favour shorter services given better overall delay over a wide range of system parameters. Policies that favour longer and broadband services, on the other hand, show better quality and smaller delay variation.     

A Bluetooth Based Sensor Network for Civil Infrastructure Health Monitoring

Communicating with sensors has long been limited either to wired connections or to proprietary wireless communication protocols. Using a ubiquitous and inexpensive wireless communication technology to create Sensor Area Networks (SANs) will accelerate the extensive deployment of sensor technology. Bluetooth, an emerging, worldwide standard for inexpensive, local wireless communication is a viable choice for SANs because of its inherent support for some of the important requirements – low power, small form factor, low cost and sufficient communication range. In this paper we outline an approach, centered on the Bluetooth technology, to support a sensor network composed of fixed wireless sensors for health monitoring of highways, bridges and other civil infrastructures. We present a topology formation scheme that not only takes into account the traffic generated by different sensors but also the associated link strengths, buffer capacities and energy availability. The algorithm makes no particular assumptions as to the placement of nodes, and not all nodes need to be in radio proximity of each other. The output is a tree shaped scatternet rooted at the sensor hub (data logger) that is balanced in terms of traffic carried on each of the links. We also analyze the scheduling, routing and healing aspects of the resulting sensor-net topology.     

Transmit antenna selection of correlated MIMO multiuser cognitive radio networks in Nakagami‐m fading channels

In this paper, we examine the impact of antenna correlation on transmit antenna selection with receive maximal ratio combining (TAS/MRC) in multiple‐input multiple‐output multiuser underlay cognitive radio network (MIMO‐MCN) over a Nakagami‐m fading environment. The secondary network under consideration consists of a single source and M destinations equipped with multiple correlated antennas at each node. The primary network composed of L primary users, each of which is equipped with multiple correlated antennas. For the considered underlay spectrum sharing paradigm, the transmission power of the proposed secondary system is limited by the peak interference limit on the primary network and the maximum transmission power at the secondary network. In particular, we derive exact closed‐form expressions for the outage probability and average symbol error rate of the proposed secondary system. To gain further insights, simple asymptotic closed‐form expressions for the outage probability and symbol error rate are provided to obtain the achievable diversity order and coding gain of the system. In addition, the impact of antenna correlation on the secondary user ergodic capacity has been investigated by deriving closed‐form expressions for the secondary user capacity. The derived analytical formulas herein are supported by numerical and simulation results to clarify the main contributions. Copyright © 2016 John Wiley & Sons, Ltd.     

Performance evaluation of OFDM and single‐carrier systems using frequency domain equalization and phase modulation

In this paper, we study the performance of the continuous phase modulation (CPM)‐based orthogonal frequency division multiplexing (CPM‐OFDM) system. Also, we propose a CPM‐based single‐carrier frequency domain equalization (CPM‐SC‐FDE) structure for broadband wireless communication systems. The proposed structure combines the advantages of the low complexity of SC‐FDE, in addition to exploiting the channel frequency diversity and the power efficiency of CPM. Both the CPM‐OFDM system and the proposed system are implemented with FDE to avoid the complexity of the equalization. Two types of frequency domain equalizers are considered and compared for performance evaluation of both systems; the zero forcing (ZF) equalizer and the minimum mean square error (MMSE) equalizer. Simulation experiments are performed for a variety of multipath fading channels. Simulation results show that the performance of the CPM‐based systems with multipath fading is better than their performance with single path fading. The performance over a multipath channel is at least 5 and 12 dB better than the performance over a single path channel, for the CPM‐OFDM system and the proposed CPM‐SC‐FDE system, respectively. The results also show that, when CPM is utilized in SC‐FDE systems, they can outperform CPM‐OFDM systems by about 5 dB. Copyright © 2010 John Wiley & Sons, Ltd.     

1.2 nm capacitance equivalent thickness gate stacks on Si-passivated GaAs

Experiments to increase the specific capacitance of MOS capacitors consisting of HfO₂ on a passivating interfacial layer (IL) of amorphous Si (a-Si) on GaAs are described. XPS analysis of the layers and electrical measurements on the capacitors are combined to study the evolution of the gate stack during deposition and subsequent heat treatments. It is shown that oxidation of the a-Si IL is a major factor in preventing the attainment of a scaled capacitance equivalent thickness (CET). By controlling the deposition of the layers, the gate metal and the heat treatments, a highly scaled gate stack with a CET of 1.2 nm and a leakage reduction of more than 4 orders of magnitude with respect to SiO₂/Si was realized.     

Inverse modeling and its application in the design of high electronmobility transistors

An inverse modeling technique is introduced to determine the structural and physical parameters of HEMT from the desired data for maximum transconductance. The technique is based on the availability of analytical expressions describing the electron carrier concentration, the current, the transconductance, the capacitances and the unity current gain frequency of a HEMT. Empirical formulae are obtained that relate the maximum transconductance to the doped AlGaAs thickness, spacer layer thickness, dopant density and aluminum mole fraction. The technique is applied to the design of a HEMT and shows good agreement with the experimental data     

Prediction of subharmonic oscillation in switching regulators: from a slope to a ripple standpoint

New exact critical conditions for predicting subharmonic instability in switching regulators are approximated by simple design-oriented expressions valid under practical conditions. These simplified expressions contain the ripple and slope information of the feedback control signal. Depending on the converter topology, the controller used and values of parasitic parameters, either the slope or the ripple can be dominant in predicting instability. A discussion on the validity of this interpretation is illustrated through six different examples of switching regulators using the concept of the spectral radius and the relative degree of the system loop. Using this approach, the boundary between the desired stable region and the subharmonic instability can be easily obtained. The theoretical results are validated by means of numerical simulations.     

Effects of Geometrical Discontinuities on Distributed Passive Intermodulation in Printed Lines

This paper presents the results of experimental study of passive intermodulation (PIM) generation in microstrip lines with U-shaped and meandered strips, impedance tapers, and strips with the profiled edges. It is shown that the geometrical discontinuities in printed circuits may have a noticeable impact on distributed PIM generation even when their effect is indiscernible in the linear regime measurements. A consistent interpretation of the observed phenomena has been proposed on the basis of the phase synchronism in the four-wave mixing process. The results of this study reveal new features of PIM production important for the design and characterization of low-PIM microstrip circuits.      

Enhanced fair earliest due date first scheduling strategy for multimedia applications in LTE downlink framework

Guaranteeing a certain delay threshold for delay‐sensitive applications in long term evolution (LTE) cellular communication system is a very challenging mission. By implementing an optimal scheduling strategy, this mission will be achieved. In this article, a novel scheduler is introduced in order to meet a predefined level of service quality by guaranteeing a specific delay threshold for delay‐sensitive applications in LTE cellular systems. The proposed scheduler assigns the available resource blocks (RBs) to active user equipments (UEs) tacking into consideration several attributes. The expiration date of each packet, the channel quality, the average data rate previously achieved by each UE, and the number of dropped packets for each UE compared with the average number of packets totally dropped are all considered in the proposed scheduler working mechanism. Consequently, the proposed scheduling strategy reduces the number of packets dropped for multimedia applications, and at the same time maximizes the overall throughput of the network. Simulation results are provided to study and evaluate the performance of the proposed scheduling strategy. A comparative study is presented between the proposed strategy and the most recent scheduling techniques. The obtained results prove that the proposed scheduling strategy has considerably acceptable and appreciated results compared with the results of the state‐of‐the‐art scheduling techniques.     

Synthesis and Characterizations of p-Type Kesterite Ag 2 ZnSnS 4 Thin Films Deposited by Spray Pyrolysis

The fabrication of absorber materials based on kesterite materials has attracted considerable attention in recent articles owing to their excellent optical and electrical properties. In this work, we present the synthesis of Ag2ZnSnS4 films with different thicknesses using a cost-effective spray pyrolysis method. X-ray diffraction was used to check the tetragonal phase and the highly oriented nature of the Ag2ZnSnS4 films. Optical data analysis indicates that a direct allowed transition has appeared in the Ag2ZnSnS4 thin films. The optical results reveal that the energy gap decreases from 1.5 eV to 1.23 eV via enlarging the film thickness of the Ag2ZnSnS4 thin films. Moreover, the dispersion parameters obtained via the Wemple–DiDomenico model and the nonlinear optical parameters of the Ag2ZnSnS4 samples were computed and analyzed.