Correction to: Recent advances in the design of metal–organic frameworks for methane storage and delivery

Journal of Porous Materials -     

Interfacial activity and micellar morphology of an imidazolium ring containing zwitterionic surfactants

Zwitterionic surfactants based on 3-(1-alkyl-3-imidazolio) propane-sulfonate ([ImS3-R] where R is octyl or dodecyl) is an emerging and important class of amphiphile due to their relevance as nano reactors for the synthesis of metallic nanoparticles and accelerated acid hydrolysis. The physicochemical properties of such synthesized imidazolium ring-containing zwitterionic surfactants have been characterized by surface tension and small-angle neutron scattering (SANS) techniques. Surface tension measurements were used to calculate several thermodynamic parameters over a range of concentrations and temperatures (298–313 K). The results obtained showed a weak signature representing the critical micelle concentration (CMC) for ImS3-8, however, by increasing the alkyl length of the hydrophobic group to dodecyl, that is, ImS3-8 to ImS3-12, the signature of the CMC was much more evident. As expected, the CMC for ImS3-12 shifted to a lower concentration. An increase in temperature increased the surface activity and decreased the CMC of both zwitterionic surfactants, although the changes were small. Compared to classical surfactants, that is, sodium dodecyl sulfate and dodecyl trimethylammonium bromide, the CMC of ImS3-12 is much lower. Modeling of SANS data demonstrated that the morphology of the micelles formed by these amphiphiles may be described by the “classical” model, a central hydrophobic core, with a shell of hydrated headgroups. Due to their widespread applications in colloidal and interfacial science, the present study adds new insight to the fundamental understanding of these interesting imidazolium-based surface-active ionic liquids (ImS3-R).     

Foliar Application of Silicon Enhances Growth,Flower Yield,Quality and Postharvest Life of Tuberose (Polianthes tuberosa L.) under Saline Conditions by Improving Antioxidant Defense Mechanism

Silicon - Tuberose is native to Mexico and then reached Europe and spread other parts of the world. In Pakistan, tuberose stalks come in the market during late summer and autumn when only few...     

Recent Advances in CNT-based FET Transistor Biosensors to Detect Biomarkers of Clinical Significance

Silicon - The development of advanced materials has attracted interest for promising novel applications in biosensing and realm of nanophotonics. This interest in nanoelectronics, and...     

CFD analysis of the brake disc and the wheel house through air flow: Predictions of Surface heat transfer coefficients (STHC) during braking operation

Journal of Mechanical Science and Technology - Braking system is one of the basic organs to control a car. For many years, the disc brakes have been used in automobiles for safe retardation of the...     

Optimum design of cam-roller follower mechanism using a new evolutionary algorithm

Selection of tooling to perform specific operations like drilling and milling on ceramic materials using rotary ultrasonic machining process is an important aspect to meet stringent dimensions on workpiece as well as intended performance of tool. This phenomenon is more critical for micro rotary ultrasonic machining. In the present study, an effort was made to do micro drilling operation of Ø0.3 mm tool with varying geometry, having different wall thicknesses and abrasive grain sizes using design of experiments. The effect of tool-based parameters like grain size and wall thickness has been studied on axial cutting force, radial cutting force, tool wear, edge chipping area and taper. After examining axial and radial cutting forces, it has been concluded that lower wall thickness (80 μm) tool is good for drilling operation; and higher wall thickness (100 μm) tool is good for milling operation under same material removal rate conditions. It has been also investigated that lower wall thickness (80 μm) tool has less edge chipping area and less taper and can impart high drilling depth as compared to higher wall thickness (100 and 150 μm) tool. It is also concluded that lesser grain size (15 μm) tools are advantageous in terms of edge chipping area and cutting force for drilling and milling operations as compared to higher grain size (30, 35 and 45 μm) tool at constant material removal rate. Higher grain size tools have been broken at 1.13 mm³/h material removal rate conditions due to bad profile accuracy. But higher grain size tools have worked fairly well at less material removal rate condition. Higher grain size tools produced less wear. Tool wear was found minimum in higher wall thickness (100 μm) tool having higher abrasive grain size (30 μm). Using inferred results, Ø0.3 mm drilling experiments have been carried out on six aerospace ceramic materials. Also, groove of 0.5 mm size using Ø0.3 mm optimised tool has been successfully carried out in sintered SiC.     

Contact dynamic modeling of a liquid droplet between two approaching porous materials

A computational fluid dynamics model based on a finite difference solution to mass and momentum conservation equations (Navier–Stokes equations) for a liquid droplet transport between two porous or nonporous contacting surfaces (CSs) is developed. The CS dynamic (equation of motion) and the spread of the incompressible liquid available on the primary surface for transfer are coupled with the Navier–Stokes equations. The topologies of the spread dynamic between and inside both surfaces (primary and CSs) are compared with experimental data. The amount of mass being transferred into the CS, predicted by the model, is also compared to the experimental measurements. The impact of the initial velocity on the spread topology and mass transfer into the pores is addressed. © 2014 American Institute of Chemical Engineers AIChE J, 60: 2346–2353, 2014     

Synthesis of nanostructured copper hexacyanidoferrate and its application in voltammeteric detection of salbutamol

Nanostructured copper hexacyanidoferrate has been synthesized and characterized using elemental analysis, atomic absorption spectroscopy, thermal and infrared spectral studies. The transmission electron microscopic studies of the synthesized material showed that it consisted of irregular oval and rod shaped particles with a size range 70–100 nm. Nanostructured copper hexacyanidoferrate modified glassy carbon electrode was characterized by cyclic voltammetery and nanostructured copper hexacyanidoferrate–carbon nanotube composite material modified glassy carbon electrode has been used for electrocatalytic oxidation of salbutamol. The electrode modified with composite material was found to reduce the peak potential of oxidation of salbutamol by nearly 90 mV.     

Zn–Ni/nano-TiO2 composite electrodeposits: surface modifications and protective properties

Zn–Ni composite coatings were obtained by electrochemical co-deposition of TiO₂ nano-particles (mean diameter 21 nm). Zn–Ni alloy coating was also produced under the same experimental conditions for comparison. The surface morphology, crystallographic structure, and the grain size of the deposits were investigated, along with the percentage of the embedded nano-particles in Zn–Ni matrix, as a function of concentration of TiO₂ nano-particles in the bath. As the titania incorporation percentage is increased, a grain refinement in the nanometer region was revealed followed enhanced microhardness values and an improvement of the content of the nickel in the alloy. Annealing of all coatings at 200 °C revealed the crystallization of the matrix accompanied by a decrease of microhardness followed by stability for 24 h. The corrosion behavior of Zn–Ni/nano-TiO₂ composite coatings with various amount of particle content was mainly studied by electrochemical impedance spectroscopy in 3 % NaCl. It was seen that Zn–Ni/nano-TiO₂ composite coatings exhibited higher corrosion resistances comparing to Zn–Ni alloy coating and corrosion protection improved with increasing nano-TiO₂ in coatings.     

Synthesis of biocompatible and degradable microspheres based on 2‐hydroxyethyl methacrylate via microfluidic method

Monodisperse poly(2‐hydroxyethyl methacrylate), p‐HEMA, microspheres in size ranging from 16 to 340 (μm) were synthesized by in situ emulsion photopolymerization of HEMA monomer with polyethylene glycol diacrylate (p‐EGDA) by means of a three‐dimensional microfluidic flow‐focusing device. An aqueous solution of HEMA, p‐EGDA as chain extender and UV‐photoinitiator serving as dispersed phase formed microdroplets in a continuous oil phase mainly consisting of n‐heptane. A downward coaxial orifices design in the device led to confinement of the reaction admixtures thread to central axis of the microchannels. This design strategy could solve the wetting problem of dispersed phase with the microchannels leading to a successful production of monodisperse microspheres with size variation of less than 4%. The effects of concentration of p‐EGDA, surfactant, and flow rate ratios on microsphere size were examined. It was observed that increasing the concentration of p‐EGDA slightly increases the size whereas increasing the flow rate ratios of continuous to dispersed phase effectively decreases the size of microspheres. The rapid continuous synthesis of p‐HEMA based microspheres via the microfluidic route with reliable control over size, size distribution, and composition opens new doors for mass production of biocompatible and degradable polymeric microspheres for enormous biotechnological applications. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40925.