The so-called congenital trigger digit: further experience

The authors reviewed 53 patients with 70 congenital trigger digits. Three of these were seen at an early age. Most "congenital" trigger digits present later than the neonatal period. A clear difference exists between trigger thumbs and trigger fingers. In our series, thumbs were more frequently affected, 30% were bilateral and none resolved spontaneously. The long fingers were less frequently affected, and two of them (28%) recovered without operation. All other children had an operative release of the A1 pulley of the flexor tendon sheath, with excellent results.     

Spectral Measurement of the Film-Substrate Index Difference in Proton-Exchanged LiNbO(3) Waveguides

We report the spectral characterization of proton-exchanged lithium niobate (PE:LiNbO(3)) waveguides in terms of the variation of the refractive-index difference between the waveguiding layer and the substrate. The dispersion of the extraordinary refractive-index increase (deltan(e)) is measured from 405 to 1319 nm with several light sources. Two types of proton-exchanged waveguide, prepared under different conditions, are studied. These measurements should be of use in the optimization of PE:LiNbO(3) waveguides for nonlinear optical applications, particularly in second-harmonic generation in the blue-green wavelength region.     

Solid state bonding of Al2O3 with Cu, Ni and Fe: characteristics and properties

A solid state bonding technique under hot pressing was used for joining alumina with thin metal sheets of Ni, Cu and Fe. The microstructure and microchemistry of the ceramic–metal interface and of the fracture interface were examined using scanning electron microscopy (SEM) energy dispersive spectroscopy (EDS) and X-ray diffraction (XRD), in order to identify the adhesion mechanisms and the nature of strength limiting flaws. Interaction between the selected metals and alumina can be physical or physico-chemical in nature: very low amounts of interfacial compounds were formed, depending on the processing conditions and on the presence of oxygen in the system. Fracture and toughness tests indicated that high ceramic–metal interface strengths (up to 177 MPa) were achieved under the adopted processing conditions and that strength and toughness were directly related. Moreover, an increase in hardening in the metal interlayer at a distance of 2–3 m from the interface was observed in the samples with high strength values. The mechanical behaviour was related to several factors that strongly depend on the bonding conditions: plastic deformation of the metal, metal creep, metal intrusion and diffusion into alumina, and chemical reactions at the interface. © 1998 Chapman & Hall     

High-performance wobbling subreflector for the Millimetre and Infrared Testa Grigia Observatory 2.6-m telescope

The Millimetre and Infrared Testa Grigia Observatory 2.6-m Cassegrain telescope has been designed to allow high-sensitivity observations in the millimeter spectral range. For this purpose, in order to reduce unwanted contributions from local foregrounds, we adopted a sky-chopping technique, by wobbling the telescope subreflector. We describe the design and performance of the wobbling system, which can endure external forced two and three fields square-wave modulation and includes features such as high frequency, high amplitude, high duty cycle, low microphonics, and high stability.     

Iterant recombination with one-norm minimization for multilevel Markov chain algorithms via the ellipsoid method

Recently, it was shown how the convergence of a class of multigrid methods for computing the stationary distribution of sparse, irreducible Markov chains can be accelerated by the addition of an outer iteration based on iterant recombination. The acceleration was performed by selecting a linear combination of previous fine-level iterates with probability constraints to minimize the two-norm of the residual using a quadratic programming method. In this paper we investigate the alternative of minimizing the one-norm of the residual. This gives rise to a nonlinear convex program which must be solved at each acceleration step. To solve this minimization problem we propose to use a deep-cuts ellipsoid method for nonlinear convex programs. The main purpose of this paper is to investigate whether an iterant recombination approach can be obtained in this way that is competitive in terms of execution time and robustness. We derive formulas for subgradients of the one-norm objective function and the constraint functions, and show how an initial ellipsoid can be constructed that is guaranteed to contain the exact solution and give conditions for its existence. We also investigate using the ellipsoid method to minimize the two-norm. Numerical tests show that the one-norm and two-norm acceleration procedures yield a similar reduction in the number of multigrid cycles. The tests also indicate that one-norm ellipsoid acceleration is competitive with two-norm quadratic programming acceleration in terms of running time with improved robustness.     

Sensitivity analysis of the rice model WARM in Europe: Exploring the effects of different locations,climates and methods of analysis on model sensitivity to crop parameters

Sensitivity analysis studies how the variation in model outputs can be due to different sources of variation. This issue is addressed, in this study, as an application of sensitivity analysis techniques to a crop model in the Mediterranean region. In particular, an application of Morris and Sobol' sensitivity analysis methods to the rice model WARM is presented. The output considered is aboveground biomass at maturity, simulated at five rice districts of different countries (France, Greece, Italy, Portugal, and Spain) for years characterized by low, intermediate, and high continentality. The total effect index of Sobol' (that accounts for the total contribution to the output variation due a given parameter) and two Morris indices (mean μ and standard deviation σ of the ratios output changes/parameter variations) were used as sensitivity metrics. Radiation use efficiency (RUE), optimum temperature (T_opt), and leaf area index at emergence (LAI_ini) ranked in most of the combinations site × year as first, second and third most relevant parameters. Exceptions were observed, depending on the sensitivity method (e.g. LAI_ini resulted not relevant by the Morris method), or site-continentality pattern (e.g. with intermediate continentality in Spain, LAI_ini and T_opt were second and third ranked; with low continentality in Portugal, RUE was outranked by T_opt). Low σ values associated with the most relevant parameters indicated limited parameter interactions. The importance of sensitivity analyses by exploring site × climate combinations is discussed as pre-requisite to evaluate either novel crop-modelling approaches or the application of known modelling solutions to conditions not explored previously. The need of developing tools for sensitivity analysis within the modelling environment is also emphasized.     

A heuristic approach for packing identical rectangles in convex regions

In this paper we propose a heuristic approach for the problem of packing equal rectangles within a convex region. The approach is based on an Iterated Local Search scheme, in which the key step is the perturbation move. Different perturbation moves, both combinatorial and continuous ones, are proposed and compared through extensive computational experiments on a set of test instances. The overall results are quite encouraging.     

Digital Elevation Model generation for historical landscape analysis based on LiDAR data,a case study in Flanders (Belgium)

This paper discusses the generation of a high precision DEM (Digital Elevation Model) based on high density airborne LiDAR (Light Detection and Ranging) data for an interdisciplinary landscape archaeological study concerning the settlement history and environment in Sandy Flanders, a region to the north of Ghent (Belgium). The objective was to create a detailed topographical surface free of artificial features and topographical artefacts, in the form of a DEM, visualizing the natural and current topography through the implementation of true ground points only. The semi-automatical removal of these features and artefacts was based on topographical vector data, visual interpretations and slope analysis. Ultimately two DEM’s were constructed (1) a TIN (Triangulated Irregular Network) model, whereby the inherent large file format restricts the usability to large scale and (2) a grid model which can be used for small-, medium- and large-scale applications. Both datasets were used as an image that is interpreted using ancillary data from historical sources. Its usefulness is illustrated in a case of field pattern and microfield topography. Starting from this DEM, the approach of this landscape historical study is mainly retrogressive, i.e. starting from the landscape structures and elements that are still present in the contemporary landscape and moving into the past.     

Loss and gain functions for CBR retrieval

The method described in this article evaluates case similarity in the retrieval stage of case-based reasoning (CBR). It thus plays a key role in deciding which case to select, and therefore, in deciding which solution will be eventually applied. In CBR, there are many retrieval techniques. One feature shared by most is that case retrieval is based on attribute similarity and importance. However, there are other crucial factors that should be considered, such as the possible consequences of a given solution, in other words its potential loss and gain. As their name clearly implies, these concepts are defined as functions measuring loss and gain when a given retrieval case solution is applied. Moreover, these functions help the user to choose the best solution so that when a mistake is made the resulting loss is minimal. In this way, the highest benefit is always obtained.     

An algebraic characterization of the optimum of regularized kernel methods

The representer theorem for kernel methods states that the solution of the associated variational problem can be expressed as the linear combination of a finite number of kernel functions. However, for non-smooth loss functions, the analytic characterization of the coefficients poses nontrivial problems. Standard approaches resort to constrained optimization reformulations which, in general, lack a closed-form solution. Herein, by a proper change of variable, it is shown that, for any convex loss function, the coefficients satisfy a system of algebraic equations in a fixed-point form, which may be directly obtained from the primal formulation. The algebraic characterization is specialized to regression and classification methods and the fixed-point equations are explicitly characterized for many loss functions of practical interest. The consequences of the main result are then investigated along two directions. First, the existence of an unconstrained smooth reformulation of the original non-smooth problem is proven. Second, in the context of SURE (Stein’s Unbiased Risk Estimation), a general formula for the degrees of freedom of kernel regression methods is derived.