Tissue-Specific Ferritin- and GFP-Based Genetic Vectors Visualize Neurons by MRI in the Intact and Post-Ischemic Rat Brain

(1) Background: Neurogenesis is considered to be a potential brain repair mechanism and is enhanced in stroke. It is difficult to reconstruct the neurogenesis process only from the histological sections taken from different animals at different stages of brain damage and restoration. Study of neurogenesis would greatly benefit from development of tissue-specific visualization probes. (2) Purpose: The study aimed to explore if overexpression of ferritin, a nontoxic iron-binding protein, under a doublecortin promoter can be used for non-invasive visualization of neurogenesis using magnetic resonance imaging (MRI). (3) Methods: Ferritin heavy chain (FerrH) was expressed in the adeno-associated viral backbone (AAV) under the doublecortin promoter (pDCX), specific for young neurons, in the viral construct AAV-pDCX-FerrH. Expression of the enhanced green fluorescent protein (eGFP) was used as an expression control (AAV-pDCX-eGFP). The viral vectors or phosphate-buffered saline (PBS) were injected intracerebrally into 18 adult male Sprague–Dawley rats. Three days before injection, rats underwent transient middle-cerebral-artery occlusion or sham operation. Animals were subjected to In vivo MRI study before surgery and on days 7, 14, 21, and 28 days after injection using a Bruker BioSpec 11.7 T scanner. Brain sections obtained on day 28 after injection were immunostained for ferritin, young (DCX) and mature (NeuN) neurons, and activated microglia/macrophages (CD68). Additionally, RT-PCR was performed to confirm ferritin expression. (4) Results: T2* images in post-ischemic brains of animals injected with AAV-pDCX-FerrH showed two distinct zones of MRI signal hypointensity in the ipsilesioned hemisphere starting from 14 days after viral injection—in the ischemic lesion and near the lateral ventricle and subventricular zone (SVZ). In sham-operated animals, only one zone of hypointensity near the lateral ventricle and SVZ was revealed. Immunochemistry showed that ferritin-expressing cells in ischemic lesions were macrophages (88.1%), while ferritin-expressing cells near the lateral ventricle in animals both after ischemia and sham operation were mostly mature (55.7% and 61.8%, respectively) and young (30.6% and 7.1%, respectively) neurons. RT-PCR confirmed upregulated expression of ferritin in the caudoputamen and corpus callosum. Surprisingly, in animals injected with AAV-pDCX-eGFP we similarly observed two zones of hypointensity on T2* images. Cellular studies also showed the presence of mature (81.5%) and young neurons (6.1%) near the lateral ventricle in both postischemic and sham-operated animals, while macrophages in ischemic lesions were ferritin-positive (98.2%). (5) Conclusion: Ferritin overexpression induced by injection of AAV-pDCX-FerrH was detected by MRI using T2*-weighted images, which was confirmed by immunochemistry showing ferritin in young and mature neurons. Expression of eGFP also caused a comparable reduced MR signal intensity in T2*-weighted images. Additional studies are needed to investigate the potential and tissue-specific features of the use of eGFP and ferritin expression in MRI studies.     

Experimental Study of Alumina Particle Removal From a Plane surface

Micron and submicron alumina particles are often used for the mechanical polishing of the GaAs wafers processed in the microelectronic industry. A better understanding of the adhesion mechanisms is the key factor for the particle removal and for the optimisation of the industrial chemical cleaning. However, the nature and the strength of the complex interactions occurring between asymmetrical alumina particles and the surface remain unclear. Thus, an experimental study of the detachment of asymmetrical alumina particles in adhesive contact with a glass plate was done using a specially designed shear stress flow chamber. A series of experiments was performed to measure the shear stress necessary to remove individual alumina particles (of 3 and 0.3 µm nominal size) under various chemical solutions (diluted ammonia, surfactant and glycerol). Then the effects of the particle size, the resting time, the pH and the nature of the chemical solutions used for the removal of the alumina particles was characterised in terms of percentage of alumina particles detached. Results have shown that the longer the resting time, the more adherent the particles are. Moreover, it was found that the ammonia solution gives the best particle removal rate (80%) because of the strong repulsive electrostatic interactions between the alumina particles and the glass surface, both being charged negatively in a basic solution.     

Photosynthetic membranes, 21. Immobilization of catalase by photochemically grafted ultrafiltration membranes

Catalase has been immobilized in membranes prepared by photoinduced grafting onto microporous polymeric supports and its catalytic activity on hydrogen peroxide decomposition has been studied under ultrafiltration conditions by means of a recirculation apparatus. The membranes showed a very good catalytic performance and the enzyme reaction took place exclusively within the membrane structure. Initial reaction rates measured in the temperature range 5 – 35°C as a function of both substrate concentration and enzyme amount immobilized per unit membrane surface indicate that the mechanism of action of catalase is not altered after immobilization.     

Phase Equilibria in the System HfO2–Y2O3–CaO

Phase equilibria in the system HfO₂–Y₂O₃–CaO were studied in the temperature range 1250° to 2850°C by both experimental methods (X-ray phase analysis at 20° to 2000°C, petrography, annealing and quenching, differential thermal analysis in He at temperatures to 2500°C, thermal analysis in air using a solar furnace at temperatures to 3000°C, and electron microprobe X-ray analysis) and theoretical means (development of a mathematical model for the liquidus surface by means of the reduced polynomial method). Phase equilibria were determined by the structure of the restricting binary systems. No ternary compounds were found. The liquidus was characterized by the presence of six four-phase, invariant equilibria. Solid solutions were based on monoclinic (M), tetragonal (T), and cubic (F) modifications of HfO₂; C and H forms of Y₂O₃; CaO; and CaHfO₃ that crystallized in two polymorphous modifications, namely, the cubic and rhombic perovskite-type structure.     

Dispersing Behavior of Hydroxyapatite Powders Produced by Wet-Chemical Synthesis

Three hydroxyapatite powders with different surface properties were produced by wet-chemical synthesis and characterized. The electrokinetic properties of powders dispersed in water were investigated by electroacoustic spectroscopy measurements. The different surface reactivity (pH_iep and ζ potential versus pH curves) was related to the interplay of dissolution and adsorption of Ca²⁺ ions. With a view toward the preparation of porous bodies by sponge impregnation, the behavior of powder suspensions was studied. Four deflocculants were tested, and the optimum dispersing conditions for each powder were found. Anionic polyelectrolytes resulted in the best effective dispersing agent, with different optimum amounts added to the suspensions.     

Toward optimisation of electrolytic reduction of solid chromium oxide to chromium powder in molten chloride salts

Electrochemical reduction of solid Cr₂O₃, in the form of an assembled cathode of porous pellets attached to a current collector, to chromium powder was investigated in molten CaCl₂ and a molten equimolar mixture of CaCl₂ and NaCl. The study focused on the influence of pellets preparation conditions, cell voltages and temperatures on the reduction process. Analyses were reported of the characteristics of the current-time plots of the constant voltage electrolysis under different conditions, cyclic voltammograms of solid Cr₂O₃ in the molten equimolar mixture of CaCl₂ and NaCl, the microstructures and elemental compositions of the reduced pellets. Particularly, attention was given to the intermediate product of the electrolysis, calcium chromites of various stoichiometries, aiming to achieve a better understanding and optimisation of the reduction process.     

Pharmacogenetics Biomarkers and Their Specific Role in Neoadjuvant Chemoradiotherapy Treatments: An Exploratory Study on Rectal Cancer Patients

Background: Pathological complete response (pCR) to neoadjuvant chemoradiotherapy (CRT) in locally advanced rectal cancer (LARC) is still ascribed to a minority of patients. A pathway based-approach could highlight the predictive role of germline single nucleotide polymorphisms (SNPs). The primary aim of this study was to define new predictive biomarkers considering treatment specificities. Secondary aim was to determine new potential predictive biomarkers independent from radiotherapy (RT) dosage and cotreatment with oxaliplatin. Methods: Thirty germ-line SNPs in twenty-one genes were selected according to a pathway-based approach. Genetic analyses were performed on 280 LARC patients who underwent fluoropyrimidine-based CRT. The potential predictive role of these SNPs in determining pathological tumor response was tested in Group 1 (94 patients undergoing also oxaliplatin), Group 2 (73 patients treated with high RT dosage), Group 3 (113 patients treated with standard RT dosage), and in the pooled population (280 patients). Results: Nine new predictive biomarkers were identified in the three groups. The most promising one was rs3136228-MSH6 (p = 0.004) arising from Group 3. In the pooled population, rs1801133-MTHFR showed only a trend (p = 0.073). Conclusion: This exploratory study highlighted new potential predictive biomarkers of neoadjuvant CRT and underlined the importance to strictly define treatment peculiarities in pharmacogenetic analyses.     

La0.6Sr0.4Co0.2Fe0.8O3-δ nanofiber cathode for intermediate-temperature solid oxide fuel cells by water-based sol-gel electrospinning: Synthesis and electrochemical behaviour

Water-based sol-gel electrospinning is employed to manufacture perovskite oxide La_0.6Sr_0.4Co_0.2Fe_0.8O_3-δ (LSCF) nanofiber cathodes for intermediate-temperature solid oxide fuel cells. LSCF fibrous scaffolds are synthesized through electrospinning of a sol-gel solution employing water as the only solvent. Morphological characterizations demonstrate that the LSCF fibers have highly crystalline structure with uniform elemental distribution. After heat treatment, the average fiber diameter is 250 nm and the porosity of the nanofiber tissue is 37.5 %. The heat treated LSCF nanofibers are applied directly onto a Ce_0.9Gd_0.1O_1.95 (CGO) electrolyte disk to form a symmetrical cell. Electrochemical characterization is carried out through electrochemical impedance spectroscopy (EIS) in the temperature range 550?°C–950?°C, and reproducibility of the electrochemical performance for a series of cells is demonstrated. At 650?°C, the average measured polarization resistance R_p is 1.0 Ω cm². Measured performance decay is 1 % during the first 33?h of operation at 750?°C, followed by an additional 0.7 % over the subsequent 70?h.     

Phase Equilibria in the Hafnia–Yttria–Lanthana System

The HfO₂–Y₂O₃–La₂O₃ system was studied in the wide range of temperatures (1250°–2800°C) and concentrations by methods of X-ray analysis at 20°C, petrography, differential thermal analysis in helium at temperatures to 2500°C, thermal analysis in air using a solar furnace at temperatures to 3000°C, and electron microprobe X-ray analysis. The complete phase diagram was constructed. The liquidus and solidus projections, crystallization paths for the alloys, isothermal (1250°, 1600°, and 1900°C) and polythermal sections are presented. The structure of the boundary binary systems defines the phase equilibria in the ternary system. No ternary compounds were found. Ternary solid-solution regions were determined based on constituent oxides and intermediate phases.     

Electrically conductive,melt-processed polyaniline/EVA blends

Mechanical blends of ethylene–vinyl acetate copolymer and polyaniline doped with dodecyl benzene sulfonic acid (PAni–DBSA) were prepared in a two-roll mill at 50°C and in a Haake internal mixer at 150°C. The effects of the blend composition and processing conditions on the electrical conductivity and mechanical properties were investigated. These blends exhibited high levels of electrical conductivity at a small amount of PAni complex. Blends prepared in a two-roll mill displayed conductivity values as high as 1 S/cm and a higher protonation degree than the pure PAni–DBSA, as indicated by X-ray photoelectron spectroscopy. Two different insulator–conductor transition points were observed in these blends. The mechanical performance decreased as the amount of PAni–DBSA increased, indicating blend incompatibility and a plasticizing effect of the DBSA. The morphology of the blends were studied by scanning electron microscopy. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 114–123, 2001