Continuous monitoring of the dynamic behavior of a high‐rise telecommunications tower

This article describes the experimental evaluation of the dynamic effects induced by wind on a high‐rise telecommunications tower based on a permanent monitoring system. Monte da Virgem telecommunications tower is located near the city of Porto (Portugal), and its structure consists in a reinforced concrete shaft and a steel mast, with a total height of 177 m. The monitoring system includes accelerometers, anemometers, and a meteorological station, allowing the characterization of the maximum accelerations of the structure and wind regimes during a period of 6 months. The analysis of the results enabled identifying specific events, denominated as critical events, for which the dynamic response of the tower under wind actions appears significantly amplified due to wind aeroelastic instability phenomena in the steel mast. The automatic identification of the critical events was based on the application to the acceleration's records of an autoregressive model and estimation of its optimal order number based on a singular value decomposition. The results proved the robustness and efficiency of the proposed technique in identifying the number, duration, and maximum amplitude of accelerations associated to the critical events, envisaging its potential integration in structural health monitoring systems.     

Processing and thermal properties of composites based on recycled PET,sisal fibers,and renewable plasticizers

This investigation focuses on the preparation of bio‐based composites from recycled poly (ethylene terephthalate) (PET) and sisal fibers (3 cm, 15 wt %), via thermopressing process. Plasticizers derived from renewable raw materials are used, namely, glycerol, tributyl citrate (TBC) and castor oil (CO), to decrease the melting point of the recycled PET (T_m ∼ 265°C), which is sufficiently high to initiate the thermal decomposition of the lignocellulosic fiber. All used materials are characterized by thermogravimetric analysis and differential scanning calorimetry, and the composites are also characterized via dynamic mechanical thermal analysis. The storage modulus (30°C) and the tan δ peak values of CT [PET/sisal/TBC] indicate that TBC also acts as a compatibilizing agent at the interface fiber/PET, as well as a plasticizer. To compare different processing methods, rheometry/thermopressing and compression molding are used to prepare the recycled PET/sisal/glycerol/CO composites. These two different methods of processing show no significant influence on the thermal properties of these composites. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40386.     

Analysis of polyolefin compositions through near infrared spectroscopy

In this work, NIRS is employed to provide compositions of α‐olefin copolymers, allowing for evaluation of the effects of certain key process variables on the final NIR spectral responses of obtained polymer materials. This work also introduces a new temperature programmed analytical technique, which combines NIRS measurements with partial fractionation of α‐olefin copolymers. The new proposed technique can be used for evaluation of polyolefin compositions, as presented here for poly(propene/1‐butene) copolymers. Besides, preliminary results obtained from thermal fractionation experiments indicate that this new proposed experimental technique can be employed for characterization of comonomer sequence distributions of α‐olefin copolymers. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40127.     

Solid Tumors and Kinase Inhibition: Management and Therapy Efficacy Evolution

The increasing numbers of cancer cases worldwide and the exceedingly high mortality rates of some tumor subtypes raise the question about if the current protocols for cancer management are effective and what has been done to improve upon oncologic patients’ prognoses. The traditional chemo-immunotherapy options for cancer treatment focus on the use of cytotoxic agents that are able to overcome neoplastic clones’ survival mechanisms and induce apoptosis, as well as on the ability to capacitate the host’s immune system to hinder the continuous growth of malignant cells. The need to avert the highly toxic profiles of conventional chemo-immunotherapy and to overcome the emerging cases of tumor multidrug resistance has fueled a growing interest in the field of precision medicine and targeted molecular therapies in the last couple of decades, although relatively new alternatives in oncologic practices, the increased specificity, and the positive clinical outcomes achieved through targeted molecular therapies have already consolidated them as promising prospects for the future of cancer management. In recent years, the development and application of targeted drugs as tyrosine kinase inhibitors have enabled cancer treatment to enter the era of specificity. In addition, the combined use of targeted therapy, immunotherapy, and traditional chemotherapy has innovated the standard treatment for many malignancies, bringing new light to patients with recurrent tumors. This article comprises a series of clinical trials that, in the past 5 years, utilized kinase inhibitors (KIs) as a monotherapy or in combination with other cytotoxic agents to treat patients afflicted with solid tumors. The results, with varying degrees of efficacy, are reported.     

Chemical composition and corrosion protection of silane films modified with CeO2 nanoparticles

The present work aims at understanding the role of CeO₂ nanoparticles (with and without activation in cerium(III) solutions) used as fillers for hybrid silane coatings applied on galvanized steel substrates.The work reports the improved corrosion protection performance of the modified silane films and discusses the chemistry of the cerium-activated nanoparticles, the mechanisms involved in the formation of the surface coatings and its corrosion inhibition ability.The anti-corrosion performance was investigated using electrochemical impedance spectroscopy (EIS), the scanning vibrating electrode technique (SVET) and d.c. potentiodynamic polarization. The chemical composition of silanised nanoparticles and the chemical changes of the silane solutions due to the presence of additives were studied using X-ray photoelectron spectroscopy (XPS) and nuclear magnetic resonance spectroscopy (NMR), respectively.The NMR and XPS data revealed that the modified silane solutions and respective coatings have enhanced cross-linking and that silane-cerium bonds are likely to occur.Electrochemical impedance spectroscopy showed that the modified coatings have improved barrier properties and the SVET measurements highlight the corrosion inhibition effect of ceria nanoparticles activated with Ce(III) ions. Potentiodynamic polarization curves demonstrate an enhanced passive domain for zinc, in the presence of nanoparticles, in solutions simulating the cathodic environment.     

Mycotoxicological quality evaluation of corn samples used by processing industries in the Northern region of Paraná State,Brazil

Based on fungal and fumonisin contamination of 870 freshly harvested samples, the quality of corn used by processing industries in the Northern region of Paraná State, Brazil (2003 and 2004 crop-year) was evaluated. Sampling was carried out for each crop at two points in the production chain, i.e. at reception by the processors and at the pre-drying step. Corn samples were more frequently contaminated with Fusarium sp. (100%) and Penicillium sp. (84.1–95.3%) than Aspergillus sp. (5.6–19.8%). Fumonisin B₁ (FB₁) was detected in all samples from the two points in both crop-years. FB₁ levels ranged 0.02–11.83 µg g^?1 in the reception and 0.02–10.98 µg g^?1 in the pre-drying samples of the 2003 crop. Samples from the 2004 crop showed FB₁ levels ranging 0.03–12.04 µg g^?1 in the reception and 0.06–7.74 µg g^?1 in the pre-drying samples. FB₂ levels ranged 0.02–5.25 µg g^?1 in the reception and 0.01–7.89 µg g^?1 in the pre-drying samples (2003 crop-year). In samples from the 2004 crop, FB₂ levels ranged 0.02–6.12 µg g^?1 in the reception and 0.05–3.47 µg g^?1 in the pre-drying samples. Low fumonisin levels were detected in most corn samples used by processors in the Northern region of Paraná State, showing a decreasing trend in fumonisin contamination over the years.     

Effects of ripening on microstructure and texture of “Ameixa d’Elvas” candied plums

The plums used to produce a traditional candied product, “Ameixa d’Elvas”, were obtained from two orchards, Vila Viçosa (VV) and Cano (CA). These orchards were selected because the fruits were behaving differently: (1) The day of harvesting for candying, established by the total soluble solids and titratable acidity, was one week earlier in VV; (2) VV yielded candied plums with good texture properties whereas CA gave poor processed fruits. In order to understand the origin of these differences, fruits from both orchards were harvested on the day established as the harvesting day for VV (day 1) and for CA (day 8). Comparable texture properties were obtained in firmness, rigidity and deformation work between the VV fresh plums harvested on day 1 and the CA plums harvested on day 8 but these were lower in CA when the flesh was analysed separately, in accordance with the activities of pectin methyl esterase (PME), polygalacturonase (PG) and cellulase (Cel). The increase of the intercellular area of parenchyma cells and the decrease in cell area caused by boiling, which resulted in a pronounced loss of textural properties, were partially recovered after the immersion of the fruits in sucrose syrup. The CA plums harvested on day 8 had a more pronounced degradation with boiling and lower recovery of cell shape, size and textural characteristics than had those of VV harvested on day 1. Upon candying, similar properties were observed for the fruits harvested on the same day: good candied products were observed for VV and CA fruits harvested on day 1 and poor candied products were observed for VV and CA fruits harvested on day 8. This work shows that the characteristics of the flesh of the fresh fruits are key parameters in defining the textural properties of the candied plum. The establishment of the harvesting moment for candying should take into account the changes that occur in the flesh of the plums during ripening.