The mechanism for the colour change of iron chromium black pigments in glazes through transmission electron microscopy techniques

Black iron-chromium (Fe-Cr) bearing oxide pigments are generally utilised as effective colourants in a wide variety of applications. However, in the case of their use within ZnO-containing glazes, they yield an undesirable brown colour instead of expected black colour. In order to understand the colour change in this system, we report the use of focused ion beam (FIB) sample preparation technique followed by the use of analytical transmission electron microscopy (TEM) characterisation techniques. According to the results, the formation of a reaction layer between the pigment and glaze was identified with an average composition of Zn_0.48Fe_0.79Cr_1.32O₄. Additionally, the valance of Fe was determined as 3+ in the pigment grain, whereas 2+ in the reaction layer and the glaze, respectively. Therefore, it was concluded that the colour change is occurring as result of the valence variation of Fe, the formation of Zn_0.48Fe_0.79Cr_1.32O₄ compound and the outward diffusion of Fe into the glaze.     

Experimental study of mechanical and electrical properties of carbon nanofiber/epoxy composites

Epoxy nanocomposites of different content of carbon nanofibers up to 1 wt.% have been fabricated under room temperature and refrigerated curing conditions. The composites were studied in terms of mechanical and electrical properties. Flexural modulus and hardness were found to increase significantly in refrigerated samples due to prevention of aggregates of nanofibers during cure condition. Increase and shifting in G-band by Raman spectra of these samples confirmed stress transfer and reinforcement between epoxy matrix and carbon nanofiber. Electrical conductivity improved by 3–6 orders after infusing carbon nanofibers in insulating epoxy. Room temperature samples acquired higher conductivity that was attributed to network formation by aggregates of nanofibers along the fiber alignment direction as revealed by electron microscopic studies.     

Spiral-CT-based assessment of tracheal stenoses using 3-D-skeletonization

PURPOSE: Demonstration of a technique for three-dimensional (3-D) assessment of tracheal-stenoses, regarding site, length and degree, based on spiral computed tomography (S-CT). PATIENTS AND METHODS: S-CT scanning and automated segmentation of the laryngo-tracheal tract (LTT) was followed by the extraction of the LTT medial axis using a skeletonization algorithm. Orthogonal to the medial axis the LTT 3-D cross-sectional profile was computed and presented as line charts, where degree and length was obtained. Values for both parameters were compared between 36 patients and 18 normal controls separately. Accuracy and precision was derived from 17 phantom studies. RESULTS: Average degree and length of tracheal stenoses was found to be 60.5% and 4.32 cm in patients compared with minor caliber changes of 8.8% and 2.31 cm in normal controls (p < 0.0001). For the phantoms an excellent correlation between the true and computed 3-D cross-sectional profile was found (p < 0.005) and an accuracy for length and degree measurements of 2.14 mm and 2.53% respectively could be determined. The corresponding figures for the precision were found to be 0.92 mm and 2.56%. CONCLUSION: LTT 3-D cross-sectional profiles permit objective, accurate and precise assessment of LTT caliber changes. Minor LTT caliber changes can be observed even in normals and, in case of an otherwise normal S-CT study, can be regarded as artifacts.     

First observation of the fourth neutral polarization point in the atmosphere

In the clear sky there are three commonly known loci, the Arago, Babinet, and Brewster neutral points, where the skylight is unpolarized. These peculiar celestial points, bearing the names of their discoverers, have been the subject of many ground-based investigations, because their positions are sensitive indicators of the amount and type of atmospheric turbidity. According to theoretical considerations and computer simulations, there should exist an additional neutral point approximately opposite to the Babinet point, which can be observed only at higher altitudes in the air or space. Until now, this anonymous "fourth" neutral point has not been observed during air- or space-borne polarimetric experiments and has been forgotten, in spite of the fact that the neutral points were a basic tool in atmospheric research for a century. Here, we report on the first observation of this fourth neutral point from a hot air balloon. Using 180 degrees-field-of-view imaging polarimetry, we could observe the fourth neutral point at 450, 550, and 650 nm from different altitudes between 900 and 3500 m during and after sunrise at approximately 22 degrees - 40 degrees below the anti-solar point along the anti-solar meridian, depending on the wavelength and solar elevation. We show that the fourth neutral point exists at the expected location and has characteristics similar to those of the Arago, Babinet, and Brewster points. We discuss why the fourth neutral point has not been observed in previous air- or space-borne polarimetric experiments.     

Fourier transform infrared analysis of gas composition in low-volume light bulbs

Fourier transform infrared spectroscopy has been used for in situ analysis of HBr, CH3Br, and CO within light bulbs at different stages of burning time. The interference fringes originated in the quartz walls of the bulbs have been eliminated by different methods. The NIPALS procedure yielded higher S/N ratio than the fringe-elimination method applied. The CO and HBr showed time-dependent concentration changes during the burning period. The maximum CO concentration (approximately 6 ppm) was detected after 30-50 s of burning time, and then it practically burned out after 5 h. The HBr concentration increased in the first 3 min of burning, and then its concentration stabilized at a 10-15 ppm level. After 5 s of illumination, the CH3Br concentration became undetectable.     

Transient experiments from the thermal-hydraulic ADS lead bismuth loop (TALL) and comparative TRAC/AAA analysis

TALL is a medium-size experimental facility constructed at KTH, to study the steady-state and transient thermal-hydraulics performance of LBE-cooled reactors, with the primary purpose of supporting the European transmutation demonstration (ETD) using LBE-cooled accelerator-driven systems (ADS). This paper presents the results of transient experiments performed on the TALL test facility, whose aim is to provide a data base for validation of computer codes which may be used for the analysis of the safety of those systems. This paper also presents the results of the post-test calculations, carried out at PSI, using the TRAC/AAA code. The transient experiments performed include the loss of heat sink, the loss of pump, the loss of both primary and secondary flows, overpower, overcooling, heater trip, and the operational transients of start-up and shut-down. The experimental results show the excellent natural circulation performance of a LBE-cooled system which should contribute to a good safety performance. The TRAC/AAA calculations provide results which agree well with the experimental data.     

Target tracking in infrared imagery using weighted composite reference function-based decision fusion.

In this paper, we propose a novel decision fusion algorithm for target tracking in forward-looking infrared image sequences recorded from an airborne platform. An important part of this study is identifying the failure modes in this type of imagery. Our strategy is to prevent these failure modes from developing into tracking failures. The results furnished by competing ego-motion compensation and tracking algorithms are evaluated based on their similarity to a target model constructed using the weighted composite reference function.     

Respirometric Assessment of Primary Sludge Fermentation Products

This study investigates the potential of primary sludge fermentation for the generation of readily biodegradable substrate. Experimental evaluation indicates that uncontrolled fermentation converted 22% of the initial volatile suspended solids in the sludge into soluble biodegradable chemical oxygen demand (COD). More than 85% of the soluble COD generated was associated with the formation of short chain volatile fatty acids (VFAs). The recoverable fraction of the fermented sludge supernatant may potentially increase the biodegradable COD content of the primary effluent by 5%. The VFA composition predominantly involved acetic and propionic acids as reported in the literature. Due to the high VFA content, activated sludge Model No. 1 could not predict the COD fractionation in the primary sludge; activated sludge Model No. 3 provided a better interpretation of the oxygen uptake profile through initial storage of the VFAs in the sludge.     

A 32-mW 320-MHz continuous-time complex delta-sigma ADC for multi-mode wireless-LAN receivers

We present an experimental continuous-time complex delta-sigma multi-bit modulator, implemented in standard 0.25-/spl mu/m CMOS technology and meeting all major requirements for application in IEEE 802.11a/b/g wireless LAN receivers. The clock frequency is 320 MHz, producing an oversampling ratio of 16 for 20 MHz channel bandwidths. The modulator supports two operation modes for zero-IF and low-IF receiver architectures respectively, requires a single 2.5-V power supply, and dissipates only 32 mW of power. The measured peak signal-to-noise ratio is 55 dB. Further experimental results using sine-wave and OFDM test signals are also presented.