Thermal stability of metal-supported catalysts for reduction of cold-start emissions in a wood-fired domestic boiler

The aim of the present work is to develop a catalyst based on a mixture of manganese oxides and platinum supported on a metallic monolith for abatement of emissions from wood combustion, particularly during the cold-start phase. The activity and the thermal stability of the catalysts have been studied in the laboratory, before performing tests in a wood-stove. The effect of the hydrothermal treatment at 900°C on the adherence of the washcoat onto a metallic substrate was studied using scanning electronic microscope. It revealed well-adhering washcoat onto the metallic support due to the growth of the alumina whiskers during the treatment. The influence of the amount of washcoat, as well as the influence of the concentration of manganese oxides in it (Mn: 5 to 20 mol%/Al₂O₃) on the activity of fresh and hydrothermally-treated catalysts were studied. The activity tests were carried out using a mixture of carbon monoxide, naphthalene and methane in the presence of air, steam and carbon dioxide to resemble the flue gases from wood combustion. On the fresh catalysts, containing the same total amount of manganese, a high concentration of manganese oxides in the washcoat favoured the oxidation of carbon monoxide and naphthalene, whereas a lower concentration of manganese oxides in the washcoat gave higher activity for the oxidation of methane. An increased total amount of manganese oxides in the catalysts, which had the same amount of washcoat, resulted in an increase in activity for the oxidation of the three combustibles. After thermal treatment at 900°C for 270 h in steam, most of the manganese oxide catalysts were activated for the oxidation of carbon monoxide and naphthalene while only being slightly deactivated for the oxidation of methane. The addition of manganese oxides in the washcoat, however, lowers the temperature of the γ- to -alumina phase transformation. Platinum (0.5 mol%) was added to the manganese oxide (10 mol%) catalyst to improve its activity. A platinum catalyst was also tested for comparison. The platinum and the mixed catalysts showed similar activity for the oxidation of carbon monoxide and naphthalene, while the mixed catalysts were more active for the oxidation of methane. A similarly mixed MnO_x–Pt (10–0.5 mol%) catalyst supported on Al₂O₃ stabilised with 3% lanthanum, but at larger scale, was tested in a wood-stove. The possibility of pre-heating the catalyst during the start-up phase was studied. The tests revealed a strong decrease of the carbon monoxide and unburned hydrocarbons emissions during the start-up phase when the catalyst was pre-heated with hot air compared with no pre-heating or no catalyst.     

Sulfolobus solfataricus protein disulphide oxidoreductase: insight into the roles of its redox sites

Sulfolobus solfataricus protein disulphide oxidoreductase (SsPDO)contains three disulphide bridges linking residues C⁴¹XXC⁴⁴,C¹⁵⁵XXC¹⁵⁸, C¹⁷³XXXXC¹⁷⁸. To get information on the role playedby these cross-links in determining the structural and functionalproperties of the protein, we performed site-directed mutagenesison Cys residues and investigated the changes in folding, stabilityand functional features of the mutants and analysed the resultswith computational analysis. The reductase activity of SsPDOand its mutants was evaluated by insulin and thioredoxin reductaseassays also coupled with peroxiredoxin Bcp1 of S. solfataricus.The three-dimensional model of SsPDO was constructed and correlatedwith circular dichroism data and functional results. Biochemicalanalysis indicated a key function for the redox site constitutedby Cys155 and Cys158. To discriminate between the role of thetwo cysteine residues, each cysteine was mutagenised and thebehaviour of the single mutants was investigated elucidatingthe basis of the electron-shuffling mechanism for SsPDO. Finally,cysteine pK values were calculated and the accessible surfacefor the cysteine side chains in the reduced form was measured,showing higher reactivity and solvent exposure for Cys155.     

Capacitance properties of electrochemically deposited polyazulene films

Polyazulene films formed by electrochemical oxidation of azulene have been studied as active components in electrochemical capacitors. The film shows reversible electrochemical behavior in the positive potential range and exhibits p-doping properties. The influence of film formation conditions on the films electrochemical properties has been investigated. A strong effect of solvent on the polyazulene deposition has been observed. The highest yield of film deposition was found for dichloromethane. Polyazulene films also exhibit stable voltammetric properties in aprotic solvents. The voltammetric response of the film is affected by the size of the anion of the supporting electrolyte. In solutions containing tetra(alkyl)ammonium perchlorates, tetrafluoroborates or hexafluorophosphates, reversible oxidation of polyazulene is obtained. In the presence of large tetra(phenyl)borate anions, polyazulene is irreversibly oxidized upon electrochemical oxidation. The capacitance properties of these materials have been investigated by cyclic voltammetry and electrochemical impedance spectroscopy. The polyazulene film displays a relatively high specific capacitance close to 400 F g⁻¹. Such high value of C_s locates this material among very good polymeric redox pseudo-capacitors.     

Piezoelectric properties of PVDF-conjugated polymer nanofibers

This study presents the development and characterization of PVDF-conjugated polymer nanofiber-based systems. Five different conducting polymers (CPs) were synthesized successfully and used to create the nanofiber systems. The CPs used are polyaniline (PANI), polypyrrole (PPY), polyindole (PIN), polyanthranilic acid (PANA), and polycarbazole (PCZ). Nanofiber systems were produced utilizing the Forcespinning® technique. The nanofiber systems were developed by mechanical stretching. No electrical field or post-process poling was used in the nanofiber systems. The morphology, structure, electrochemical and piezoelectric performance was characterized. All of the nanofiber PVDF/CP systems displayed higher piezoelectric performance than the fine fiber PVDF systems. The PVDF/PPY nanofiber system displays the highest piezoelectric performance of 15.56 V. The piezoelectric performance of the PVDF/CP nanofiber systems favors potential for an attractive source of energy where highly flexible membranes could be used in power actuators, sensors and portable, and wireless devices to mention some.     

Lipidation of Temporin-1CEb Derivatives as a Tool for Activity Improvement,Pros and Cons of the Approach

The alarming raise of multi-drug resistance among human microbial pathogens makes the development of novel therapeutics a priority task. In contrast to conventional antibiotics, antimicrobial peptides (AMPs), besides evoking a broad spectrum of activity against microorganisms, could offer additional benefits, such as the ability to neutralize toxins, modulate inflammatory response, eradicate bacterial and fungal biofilms or prevent their development. The latter properties are of special interest, as most antibiotics available on the market have limited ability to diffuse through rigid structures of biofilms. Lipidation of AMPs is considered as an effective approach for enhancement of their antimicrobial potential and in vivo stability; however, it could also have undesired impact on selectivity, solubility or the aggregation state of the modified peptides. In the present work, we describe the results of structural modifications of compounds designed based on cationic antimicrobial peptides DK5 and CAR-PEG-DK5, derivatized at their N-terminal part with fatty acids with different lengths of carbon chain. The proposed modifications substantially improved antimicrobial properties of the final compounds and their effectiveness in inhibition of biofilm development as well as eradication of pre-formed 24 h old biofilms of Candida albicans and Staphylococcus aureus. The most active compounds (C5-DK5, C12-DK5 and C12-CAR-PEG-DK5) were also potent against multi-drug resistant Staphylococcus aureus USA300 strain and clinical isolates of Pseudomonas aeruginosa. Both experimental and in silico methods revealed strong correlation between the length of fatty acid attached to the peptides and their final membranolytic properties, tendency to self-assemble and cytotoxicity.     

Influence of yeast strain on ochratoxin A content during fermentation of white and red must

The aim of this work was to examine whether the yeast strains, responsible for alcoholic fermentation, have an influence on the concentration of ochratoxin A (OTA) in wine. Before the fermentation, OTA was added to musts up to a concentration of about 2 microg/l. OTA content was determined in white and red wines resulting from respective musts and in methanolic extract of the yeast lees (MEL). Data showed a significant reduction of OTA at the end of alcoholic fermentation. However, depending on the yeast strain involved in the fermentation, there was a difference in the content of OTA in the wines. The percentage of OTA removal during the fermentation was between 46.83% and 52.16% in white wine and between 53.21% and 70.13% in red wine. The absence of degradation products suggested an adsorption mechanism. OTA concentration in MEL resulting from red must fermentation was higher than in white. A significant amount of OTA was not recovered either from wine or from MEL.     

Production of biogenic amines by lactic acid bacteria: screening by PCR, thin-layer chromatography, and high-performance liquid chromatography of strains isolated from wine and must

Biogenic amines are frequently found in wine and other fermented food. We investigated the ability of 133 strains of lactic acid bacteria isolated from musts and wines of different origins to produce histamine, tyramine, and putrescine. We detected the genes responsible for encoding the corresponding amino acid decarboxylases through PCR assays using two primer sets for every gene: histidine decarboxylase (hdc), tyrosine decarboxylase (tdc), and ornithine decarboxylase (odc); these primers were taken from the literature or designed by us. Only one strain of Lactobacillus hilgardii was shown to possess the hdc gene, whereas four strains of Lactobacillus brevis had the tdc gene. None of the Oenococcus oeni strains, the main agents of malolactic fermentation, was a biogenic amine producer. All PCR amplicon band-positive results were confirmed by thin-layer chromatography and high-performance liquid chromatography analyses.     

Double-Headed Cationic Lipopeptides: An Emerging Class of Antimicrobials

Antimicrobial peptides (AMPs) constitute a promising tool in the development of novel therapeutic agents useful in a wide range of bacterial and fungal infections. Among the modifications improving pharmacokinetic and pharmacodynamic characteristics of natural AMPs, an important role is played by lipidation. This study focuses on the newly designed and synthesized lipopeptides containing multiple Lys residues or their shorter homologues with palmitic acid (C₁₆) attached to the side chain of a residue located in the center of the peptide sequence. The approach resulted in the development of lipopeptides representing a model of surfactants with two polar headgroups. The aim of this study is to explain how variations in the length of the peptide chain or the hydrocarbon side chain of an amino acid residue modified with C₁₆, affect biological functions of lipopeptides, their self-assembling propensity, and their mode of action.