Synthesis and characterization of nanocomposites of thermoplastic polyurethane with both graphene and graphene nanoribbon fillers

Thermoplastic polyurethane (TPU) nanocomposites containing graphene and graphene nanoribbons were obtained by polymerizing 1,4-butanediol with two diisocyanates (namely, 1,6-hexane diisocyanate or isophorone diisocyanate), in which the nanofillers were previously dispersed. Raman spectroscopy and Transmission Electron Microscopy demonstrated the formation of few-layer graphene and graphene nanoribbons dispersed in the monomers. At variance to the methods commonly reported in literature, that used in this work consists of the direct exfoliation of graphite without any chemical manipulation. Apart from the obvious cost and ease advantages, the so-obtained graphene does not contain any carboxy or alkoxy groups formed during the exfoliation process, which, at variance, are typically present in the most commonly reported methods. This finding paves the way toward the large-scale production of graphene and its nanoribbons, which are considered even more interesting than graphene itself for many potential applications. The obtained nanocomposites show a peculiar thermal and rheological behavior due to the presence of the nanofillers and to their reinforcing or plasticizing effect exerted on the TPU matrices.     

Rapid Hormetic Responses of Photosystem II Photochemistry of Clary Sage to Cadmium Exposure

Five-day exposure of clary sage (Salvia sclarea L.) to 100 μM cadmium (Cd) in hydroponics was sufficient to increase Cd concentrations significantly in roots and aboveground parts and affect negatively whole plant levels of calcium (Ca) and magnesium (Mg), since Cd competes for Ca channels, while reduced Mg concentrations are associated with increased Cd tolerance. Total zinc (Zn), copper (Cu), and iron (Fe) uptake increased but their translocation to the aboveground parts decreased. Despite the substantial levels of Cd in leaves, without any observed defects on chloroplast ultrastructure, an enhanced photosystem II (PSII) efficiency was observed, with a higher fraction of absorbed light energy to be directed to photochemistry (Φ_PSΙΙ). The concomitant increase in the photoprotective mechanism of non-photochemical quenching of photosynthesis (NPQ) resulted in an important decrease in the dissipated non-regulated energy (Φ_NO), modifying the homeostasis of reactive oxygen species (ROS), through a decreased singlet oxygen (¹O₂) formation. A basal ROS level was detected in control plant leaves for optimal growth, while a low increased level of ROS under 5 days Cd exposure seemed to be beneficial for triggering defense responses, and a high level of ROS out of the boundaries (8 days Cd exposure), was harmful to plants. Thus, when clary sage was exposed to Cd for a short period, tolerance mechanisms were triggered. However, exposure to a combination of Cd and high light or to Cd alone (8 days) resulted in an inhibition of PSII functionality, indicating Cd toxicity. Thus, the rapid activation of PSII functionality at short time exposure and the inhibition at longer duration suggests a hormetic response and describes these effects in terms of “adaptive response” and “toxicity”, respectively.     

Case study of the impact of toecap type on the microclimate in protective footwear

Protective footwear plays a critical role in work effectiveness and personal safety. It exhibits special properties due to the use of protective elements and materials, but these components may deteriorate its hygienic characteristics. This paper presents a study on the influence of toecap type on the microclimate in protective footwear (ankle boots). Toecaps made of metal and of a composite polymer material were evaluated. Changes in the footwear microclimate were monitored using a thermal foot model at a perspiration rate of about 5 g/h with and without the simulated movement function. The influence of the toecap material on the microclimate in the footwear was analyzed statistically. Under conditions of simulated movement, higher temperature and relative humidity values (about 32 °C and 90%) were recorded in the toe region of ankle boots with metal toecaps as compared to composite polymer toecaps (about 29 °C and 53%, respectively). These results suggest that protective footwear with composite toecaps ensures better ventilation of the foot during work.     

Cleaner production in Romanian textile industry: a case study

This paper reports the changes resulting from adopting environmentally sensitive criteria in Novatextile Pitesti, Romania. The changes have improved the operation of the production plant and reduced costs at the same time.     

Direct Ink Writing of a Preceramic Polymer and Fillers to Produce Hardystonite (Ca2ZnSi2O7) Bioceramic Scaffolds

The direct ink writing of an ink composed of a preceramic polymer and fillers was used to produce hardystonite (Ca₂ZnSi₂O₇) bioceramic scaffolds. Suitable formulations were developed for the extrusion of fine filaments (350 μm diameter) through a nozzle. The preceramic polymer was employed with the double purpose of contributing to the rheology of the ink by increasing its viscosity and of forming the hardystonite phase upon heat treatment by reacting with the fillers. A control of the rheology is essential when spanning features have to be produced, and therefore the main rheological characteristics of the inks were measured (flow curves, dynamic oscillation tests, viscosity recovery tests) and compared to models reported in the literature. Highly porous scaffolds (up to 80% total porosity) were produced and heat treated in air or in nitrogen atmosphere. The influence of the heat‐treatment atmosphere on the morphology, crystalline phase assemblage, and compressive strength of the scaffolds was investigated.     

Influence of macromolecular structure of novel 2- and 4-armed polylactides on their physicochemical properties and in vitro degradation process

The objective of this study was to analyse how macromolecular structure of polylactides influences their properties and degradation rate. To achieve this, novel 2- and 4-armed PDLLA and PLLA (noted as 2b and 4b) were synthesized by ring-opening method. 1,4-butanediol and pentaerythritol were used as initiators and stannous octoate was used as catalyst. The obtained polymers were investigated in terms of molecular weight by size exclusion chromatography, thermal properties by differential scanning calorimetry and thermogravimetry, and hydrophilicity by the contact angle measurements. The in vitro degradation test was carried out in PBS solution at 37 °C by means of the mass loss, water uptake, molecular weight and thermal properties changes. The branched polylactides including 2bPDLLA, 4bPDLLA, 2bPLLA and 4bPLLA were successfully synthesized and the average molecular weights were around 40-45 kDa. The numbers of arms in each polymer just slightly influenced the thermal properties and the contact angle. The crystallinity of 4bPLLA was 23 %, whereas for 2bPLLA it was 41 %. The degradation rates of both 2b and 4bPLLA were similar and the degradation process was similar only during first 7 weeks. After this period, the degradation rate of 4bPDLLA increased. Consequently, thermal properties and degradation profiles of the branched polymers would depend on plural factors, such as chain length and crystallinity in branched structure.     

Seed Quantity or Quality?—Reproductive Responses of Females of Two Dioecious Woody Species to Long-Term Fertilisation

Although seed quality and quantity, as well as reproductive performance are important life history stages of plants, little is known about the reproductive responses of trees to environmental changes such as increased anthropogenic deposition of nitrogen (N) and phosphorus (P). Dioecious plants are good models with which to test the environmental impact on female or male reproductive responses individually. We analysed effects of different long-term nutritional availability on the reproductive performance of two dioecious species (Taxus baccata L. and Juniperus communis L.) characterised by different life histories. By using pot experiments with vegetatively propagated plants grown in different fertilisation conditions, we observed an increase in plant growth and strobili production but a decrease in seed efficiency. Seeds produced by fertilised plants had greater seed mass. Fertiliser addition did not change C or N content nor the C/N ratio of T. baccata seeds, but increased N content and the N/P ratio; however, it did lower the C/N ratio in J. communis. Fertilisation did not change the metabolite profile in T. baccata but 18 metabolites were changed in J. communis. The study revealed new links between species life history, environmental changes, and reproduction. The findings imply that future environmental conditions may alter both seed productivity, and quality, as well as plant reproductive behaviour.     

Stabilization of Paste Viscosity of Cassava Starch by Heat Moisture Treatment

Cassava starch has poor paste stability during prolonged cooking. The starch was modified by heat moisture treatment. A premoistured starch (18–24% moisture) was subjected to heat treatment for 3–16h to bring about paste stability. Different types of heat treatments like moist pressure heating, dry heating and microwave heating was tried. The optimum heat treatment to bring about the paste stability was found to be 18–21% premoistured starch, which was heated at 110°C per 16h. The modified starch granules were intact and had comparatively increased sedimentation volume, oil binding capacity, amylase susceptibility, and decreaced crystallinity, water binding capacity, solubility and paste translucency. The freeze - thaw stability was excellent with modified cassava starch. “Pie filling and Halwa” (an Indian sweetmeat) made from modified cassava starch had good organoleptic properites.     

The Effect of Long-Lasting Swimming on Rats Skeletal Muscles Energy Metabolism after Nine Days of Dexamethasone Treatment

This study investigates the effect of Dexamethasone (Dex) treatment on blood and skeletal muscle metabolites level and skeletal muscle activity of enzymes related to energy metabolism after long-duration swimming. To evaluate whether Dex treatment, swimming, and combining these factors act on analyzed data, rats were randomly divided into four groups: saline treatment non-exercise and exercise and Dex treatment non-exercised and exercised. Animals in both exercised groups underwent long-lasting swimming. The concentration of lipids metabolites, glucose, and lactate were measured in skeletal muscles and blood according to standard colorimetric and fluorimetric methods. Also, activities of enzymes related to aerobic and anaerobic metabolism were measured in skeletal muscles. The results indicated that Dex treatment induced body mass loss and increased lipid metabolites in the rats’ blood but did not alter these changes in skeletal muscles. Interestingly, prolonged swimming applied after 9 days of Dex treatment significantly intensified changes induced by Dex; however, there was no difference in skeletal muscle enzymatic activities. This study shows for the first time the cumulative effect of exercise and Dex on selected elements of lipid metabolism, which seems to be essential for the patient’s health due to the common use of glucocorticoids like Dex.     

IL-6 Cytokine Family: A Putative Target for Breast Cancer Prevention and Treatment

The IL-6 cytokine family is a group of signaling molecules with wide expression and function across vertebrates. Each member of the family signals by binding to its specific receptor and at least one molecule of gp130, which is the common transmembrane receptor subunit for the whole group. Signal transduction upon stimulation of the receptor complex results in the activation of multiple downstream cascades, among which, in mammary cells, the JAK-STAT3 pathway plays a central role. In this review, we summarize the role of the IL-6 cytokine family—specifically IL-6 itself, LIF, OSM, and IL-11—as relevant players during breast cancer progression. We have compiled evidence indicating that this group of soluble factors may be used for early and more precise breast cancer diagnosis and to design targeted therapy to treat or even prevent metastasis development, particularly to the bone. Expression profiles and possible therapeutic use of their specific receptors in the different breast cancer subtypes are also described. In addition, participation of these cytokines in pathologies of the breast linked to lactation and involution of the gland, as post-partum breast cancer and mastitis, is discussed.