Auction-Based Throughput Maximization in Cognitive Radio Networks Under Interference Constraint

Cognitive radio is an emerging technique to improve the utilization of radio frequency spectrum in wireless communication networks. That is, spectrum efficiency can be increased significantly by giving opportunistic access of the frequency bands to a group of cognitive users to whom the band has not been licensed. In this paper, as a cross layer application (MAC and physical layers) of graph theory, we consider the problem of throughput maximization of spectrum allocation in cognitive radio networks under interference constraint. We propose a novel auction-based channel allocation mechanism which tries to maximize both total and primary users’ utilities while satisfying signal to interference ratio constraint on primary receivers so that transmitted packets will be successfully received, without controlling secondary user powers. For comparison we discuss a greedy algorithm as well, however, one that does not handle interference issue. In order to compare results of proposed and greedy algorithms, we propose net throughput by taking into account outage probability of primary receiver. Simulation results show that exposing higher SINR (outage) threshold not only decreases total gain and primary users’ utilities but also worsens channel distribution performance. On the other hand adding auction mechanism significantly increases total gain throughput and primary user’ s utility. Particularly, up to SINR threshold values of 20 dBs, auction provides outstanding performance and proposed algorithm has total throughput results close to those of the greedy one even though no interference constraint is applied in the greedy algorithm. Another noticeable point of simulation results is crossover of net throughputs of proposed and greedy algorithms at a SINR threshold level after which results of ABSA-UNIC and NASA-UNIC are much better. This clearly shows superiority of proposed mechanism.     

Deterioration Assessment and Rehabilitation Design of Existing Steel Bridge

Diagnostic truck-load tests and microstructural analysis were applied for structural deterioration assessment of a steel truss bridge and its rehabilitation design. The feasibility and potential benefits of using advanced field experimental techniques within a structural-identification framework have been demonstrated. Experimental information, coupled with visual inspection, engineering experience, and intuition, increased the level of confidence in the results of the condition-assessment process, permitting a more rational and cost-effective rehabilitation design. Based on the condition assessment, a two-step rehabilitation is recommended for the bridge: Restoration for a safe service life of 5–7 years, and a subsequent effort for preservation beyond.     

Tuning PL emission energy and bandgap with Ni dopant of MgO thin films

In this study, for the first time, the effect of Nickel (Ni) additive on Magnesium oxide (MgO) thin films produced by using successive ionic layer adsorption and reaction technique (SILAR) was investigated. Absorption, photoluminescence (PL), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and scanning electron microscope (SEM) measurements were executed to examine how the optical, structural and morphological properties of the samples were affected by the addition of Ni. In the absorption analysis, it was noted that the band gaps of the MgO samples decreased from 4 eV to 3.5 eV with the increase of Ni dopant concentrations. Also, the transmittance values of MgO nanostructures decreases with the increase of Ni contribution, and in the same way, the reflection measurements show that the reflection of MgO decreases with the increase of Ni doping. PL measurements revealed that the fabricated structures radiate around 410 nm and 730 nm. According to XRD measurements, besides the cubic structure of the samples, NiO formations were detected inside the MgO thin film samples due to the increase in Ni dopant. XPS measurements have proven the presence of Ni doping in MgO. SEM measurements showed that all samples exhibited nanowall structure. All these results demonstrate that Ni doping on MgO thin films can be achieved by using SILAR deposition technique.     

Understanding the role of d-Allulose and soy protein addition in pectin gels

d -Allulose (a monosaccharide and C3 epimer of fructose), one of the common rare sugars is getting attention due to its low caloric values. In this study, d -Allulose was used as a replacement of sucrose at different ratios (d -Allulose/Sucrose: 35/0, 20/15, 10/25, 0/35) to formulate pectin-based soft confectionery gels. Soy protein isolate was also added to increase the protein content. Physical properties, such as hardness, moisture content, pH, and color, were measured for the gels. Higher hardness values were obtained for the soy protein containing gels due to pectin–soy protein interaction (p < 0.05). Also, higher moisture content was observed in soy protein containing gels (p < 0.05). In addition, nuclear magnetic resonance T₂ relaxation times were measured at low field (~0.5 T) to determine how the water distribution in the samples changed and to observe how d -Allulose affected the polymer–water interactions. The study also showed that the presence of d -Allulose increased the crystallization tendency (% crystallinity of 7.9) of the pectin gels. X-ray diffraction results showed the d -allulose peaks at 33.76 and 48.68^oθ. Morphologies of the gels were also examined by scanning electron microscope. Sugar type and soy protein isolate addition were found to have significant impact on the gel formulations.     

Cyclic fatigue resistance and energy dispersive X‐ray spectroscopy analysis of novel heat‐treated nickel–titanium instruments at body temperature

The aim of this study was to evaluate the cyclic fatigue resistance of Dia‐X, WaveOne Gold and One Curve files in a water bath at intracanal temperature (35°C). Thirty‐nine instruments Dia‐X, WaveOne Gold, and One Curve systems (n = 13) were tested in an artificial canal with a curvature angle of 60° and a radius of 3 mm. A water bath setup at a temperature of 35°C was used to simulate the intracanal temperature and time to fracture (TTF) as seconds was recorded. The mean data were analyzed statistically using one‐way ANOVA, and post hoc Tukey test (p = .05). The fractured surface of the instruments was examined with scanning electron microscopy (SEM) and chemical composition of the instruments were investigated with energy dispersive X‐ray spectroscopy (EDS). Statistically significant differences were detected in TTF values of all the systems as follows: One Curve > WaveOne Gold > Dia‐X (p < .05). One Curve instruments demonstrated the highest TTF values in all the tested instruments. The EDS microanalysis revealed similar NiTi composition of on the surface of One Curve, WaveOne Gold, and Dia‐X instruments. The novel manufacturing process, including C‐wire heat treatment and the variable cross‐section of the One Curve files, could be the main factors affecting the fatigue life of the instruments.     

Conjugated Polymer Nanoparticle–Graphene Oxide Charge‐Transfer Complexes

The game‐changing role of graphene oxide (GO) in tuning the excitonic behavior of conjugated polymer nanoparticles is described for the first time. This is demonstrated by using poly(3‐hexylthiophene) (P3HT) as a benchmark conjugated polymer and employing an in situ reprecipitation approach resulting in P3HT nanoparticles (P3HT_NPs) with sizes of 50–100 nm in intimate contact with GO. During the self‐assembly process, GO changes the crystalline packing of P3HT chains in the forming P3HT_NPs from H to H/J aggregates exhibiting exciton coupling constants as low as 2 meV, indicating favorable charge separation along the P3HT chains. Concomitantly, π–π interface interactions between the P3HT_NPs and GO sheets are established resulting in the creation of P3HT_NPs–GO charge‐transfer complexes whose energy bandgaps are lowered by up to 0.5 eV. Moreover, their optoelectronic properties, preestablished in the liquid phase, are retained when processed into thin films from the stable aqueous dispersions, thus eliminating the critical dependency on external processing parameters. These results can be transferred to other types of conjugated polymers. Combined with the possibility of employing water based “green” processing technologies, charge‐transfer complexes of conjugated polymer nanoparticles and GO open new pathways for the fabrication of improved optoelectronic thin film devices.