High‐performance liquid chromatography of some natural dyes: analysis of plant extracts and dyed textiles

In this study, wool fibre samples were mordanted by means of 25% alum mordant solution. The mordanted wool samples were dyed in 50%Reseda luteola L. (weld), 20%Rhamnus petiolaris Boiss (buckthorn) and 50%Datisca cannabina L. (bastard hemp) dyebaths. A reverse‐phase high‐performance liquid chromatography with diode‐array detection method was utilised for the identification of dyes in the dyed wool samples and the plant extracts. The extraction of dyes was carried out with a hydrogen chloride/methanol/water (2:1:1; v/v/v) mixture.     

An Intra-domain Mobility Handling Scheme Across All-IP Wireless Networks

The rapid growth of wireless network technology such as HSDPA and WiMAX, has lead to greater demand for access to Internet via mobile hosts. Supporting mobile connection with fast and smooth roaming across heterogeneous wireless technologies has been an important challenge over past years. In this paper, a novel multilayer scheme for QoS-aware intra-domain mobility management is proposed. The mobility support capability is embedded in key components for the domain access network, namely, the Paging Access Routers and the Mobility-support Anchor Servers (MASs). The MASs are organized in three layers; starting from the top layer Superior-MASs, Middle-MASs and Inferior-MASs, respectively. The proposed scheme identified mobility support functionality, includes intra-domain anchor specification, route optimization algorithm, intra/inter-anchor mobility support, paging and authentication management. Simulation results of the proposed scheme show fair performance especially in the presence of QoS sensitive services.     

Nondestructive Strength Assessment of In-Place Wood Utility Poles

In-place nondestructive simulation evaluation of the remaining bending strength of wooden utility poles is vital to the continued and successful operation of the poles, viability of the electrical transmission and delivery system, and reduction of system disruption potential. A methodology for nondestructively assessing the strength of in-place wood utility poles was developed and is proposed in this paper. Because of the nonhomogeneous and anisotropic nature of wood and the variability of in-place utility poles, a deterministic approach does not seem feasible. The proposed method combines multiple variables to statistically predict the breaking strength, or modulus of rupture, of wood poles. The full-scale testing methodology was tested on real life poles. Results from in-field simulation tests were correlated to data from failure testing of the full-scale poles. The proposed static bending approach is quite accurate, utilizing a device that applies a horizontal force on an in-place utility pole and measures the resulting deflection. The slope of the force-deflection curve and the pole moment of inertia from a regression analysis correlate well to the breaking strength of the poles. Additionally, a method for measuring and adjusting for the tilt of the utility pole under test was determined. Full-scale field simulated testing and break testing data that provide significant insight into nondestructive wood pole testing are provided in this paper. Recommendations for increasing the validity of the proposed model with additional test data, together with implementation of additional relevant parameters, are made.     

Elman's recurrent neural network applications to condition monitoring in nuclear power plant and rotating machinery

The purpose of this study is to show the capability of recurrent neural nets (RNN) for condition monitoring and diagnosis in nuclear power plant systems and rotating machinery. In the first application, the study addresses the use of RNN for detecting anomalies introduced from the simulated power operation of a high-temperature gas cooled nuclear reactor. In the second, it is used to detect the motor bearing damage using a coherence function approach, which is defined between the motor current and vibration signals, for induction motors. Hence, the high performance of Elman's RNN was shown by means of two different applications.     

STRUCTURE AND REACTIONS OF BEYPAZARJ LIGNITE I. CHARACTERIZATION BY 13C NMR AND IR STUDIES

ABSTRACT

The solid state ¹³C NMR and infrared spectra of Beypazan lignite were deconvoluied by the least squares curve fitting techniques to resolve the overlapping bands in the 0-220 ppm region of the ¹³C NMR spectra and in the 4000-2700 cm^-1, 1860-900 cm^-1 and 900-400 cm^-1 regions of the infrared spectra to gain information about the structure of the lignite. Measurement of integral absorptivities of some of the functional groups present in the infrared spectra was attempted. Measured values of integral absorptivities are in good agreement with those reported previously.     

Constituents,Oxidant-Antioxidant Profile,and Antimicrobial Capacity of the Essential Oil Obtained from Ferulago Sandrasica Peşmen and Quézel

Chemical constituents, total phenolic content, total oxidant status, total antioxidant status, lipid hydroperoxides, total free –SH levels, and antimicrobial activity of essential oil obtained from the Ferulago sandrasica (Umbelliferae) were investigated. The essential oil was obtained by hydrodistillation using a Clevenger-type apparatus. The chemical constituents were analyzed by gas chromatography‐mass spectrometry. The main components of the essential oil were ocimene (30.5%), carene-δ-3 (27.4%), and α-pinene (17.8). The antimicrobial activity was tested by a disc diffusion method against E. coli MC 400, E. coli ATCC 25922, E. coli 0157 H7, E. colaecea ATCC 23355, E. feacalis ATCC 19433, P. aeruginosa NRRL B-2679, S. aureus ATCC 25923, B. nischenoformis NRRL B-1001, S. aureus ATCC 33862, B. cereus NRRL B-3711, B. subtilis NRRL B-209, M. luteus NRRL B-1013, L. monocytogenes ATCC 7644, B. subtulis ATCC 6633.     

Storage of spinach juice agglomerates: Physical,flow, structural,and thermal properties

The objective of this study was to investigate how the various storage temperatures affected the physical properties, flow characteristics, microstructure, and glass transition temperature of spinach juice agglomerates. For this purpose, spray-dried spinach juice powders were processed to agglomerates by using a modified fluidized bed dryer (1.6 m/s airflow rate, 60°C drying air temperature, 20 min processing time, and with different binder solutions containing agents as maltodextrin, gum Arabic, and whey powder isolate). The analyses were carried out every month throughout 6 months while the spinach juice agglomerates were stored at temperatures of 4, 20, and 35°C. The results revealed that over the storage time, the moisture content and water activity values of the agglomerates were generally under 11% and 0.6, respectively. The color values generally showed a decreasing trend depending on the storage time. The solubility times of the samples stored at 4°C were longer than those of stored at other storage temperatures. The SJA-GA had the lowest HR and CI values and thus the best flowability properties during all storage times. There was no detectable change in the structures of SJA stored at 20°C according to the storage time. Throughout the storage time, it was discovered that the glass transition temperature of all spinach juice agglomerates was remarkably similar. Overall, the investigation revealed that storage at 35°C for 6 months might be suitable because it delivered the intended outcomes such as greater flowability and cohesiveness, and shorter wettability and solubility times.     

Evaluation of the effects of different remineralizing agents on Streptococcus mutans biofilm adhesion

The aim of the study was to compare the effects of different remineralization methods that are well established in clinical and daily use on S. mutans biofilm adhesion. In this study 72 human third molars were used. From each tooth two pieces of 4?mm x 7?mm enamel blocks were acquired. The samples were divided into 6 groups in which include 10 samples per time period (24h and 48?h) and for each remineralization method; control, flouride, ozone, CPP-ACP, arginine, novamin. After remineralization procedures, enamel surfaces were covered with saliva. 10⁵ CFU/mL of active S. mutans culture were inoculated onto the samples. S. mutans colonies were counted with Plate Count Agar (PCA) decimal dilution method. Micromorphologic effects of different remineralization methods were observed by Scanning Electron Microscopy (SEM). The most S. mutans biofilm formation for both time periods was observed in the control group whereas the less biofilm adhesion was showed in the arginine group. There were no statistically significant differences among remineralization agents (p?>?0.05). In the control group there was statistical difference between 24?h and 48?h (p?<?0.005) but in the other study groups there were no significant difference between the time periods (p?>?0.05). Remineralization agents did not significant differ on S. mutans biofilm adhesion.     

A Comparison of the Thermo-Physical Behavior of Engkabang (Shorea macrophylla) Seed Fat–Canola Oil Blends and Lard

A study was carried out to compare the thermo-physical behaviors of canola–Engkabang fat blends with those of lard (LD). Four blends were prepared by mixing canola oil with Engkabang fat (CaO/EF) in different ratios: EF-1, 75:25; EF-2, 70:30; EF-3, 65:35; EF-4, 60:40. The fat blends and LD were compared in terms of their basic physicochemical parameters, fatty acid and triacylglycerol (TAG) compositions, melting, solidification, hardness, and polymorphic properties. The slip melting points (SMP) of the fat blends were found to range from 24.8 to 31.2 °C; EF-2 was found to display an SMP value closer to that of LD. With respect to the melting curve of CaO, the melting curves of all fat blends were found to display an additional high-melting thermal transition in the temperature region above 10 °C. The peak maximum of the high-melting thermal transition of EF-3 was the closest to that of LD. The solid fat content (SFC) value of EF-3 was equal to that of LD at 25 °C, whereas the SFC values of EF-2 and LD were similar at 30 to 40 °C. According to textural analysis, EF-2 was found to display a hardness value somewhat closer to that of LD. X-ray diffraction analysis showed that LD and fat blends EF-1, EF-2, and EF-3 display β polymorphic forms.