Thermal and crystallization characteristics of poly(ethylene terephthalate) with poly(oxybenzoate‐p‐trimethylene terephthalate) copolymer

Poly(ethylene terephthalate) (PET) was blended with two different poly(oxybenzoate‐p‐trimethylene terephthalate) copolymers, designated T28 and T64, with the level of copolymer varying from 1 to 15 wt %. All samples were prepared by solution blending in a 60/40 (by weight) phenol/tetrachloroethane solvent at 50°C. The crystallization behavior of the samples was studied by DSC. The results indicate that both T28 and T64 accelerated the crystallization rate of PET in a manner similar to that of a nucleating agent. The acceleration of PET crystallization rate was most pronounced in the PET/T64 blends with a maximum level at 5 wt % of T64. The melting temperatures for the blends are comparable to that of pure PET. The observed changes in crystallization behavior are explained by the effect of the physical state of the copolyester during PET crystallization as well as the amount of copolymer in the blends. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 1599–1606, 2002     

Rigid polyurethane foams: A model of the foaming process

A model of the manufacture of rigid polyurethane foams by free rising is presented. The extent of cream and rise periods as well as the amount of blowing agent necessary to give the desired foam density are theoretically predicted. The rate of blowing agent evaporation is calculated from an experimental boiling temperature vs. composition curve. Experimental runs were carried out with a formulation consisting of a polymeric isocyanate, a polyether polyol based on sorbitol, a silicone-polyol block-copolymer as surfactant, dibutyltin dilaurate as catalyst, and trichlorofluoromethane as blowing agent. Mixing was performed in situ in the mold using a commercial foaming machine. Experimental results gave a satisfactory agreement with model predictions. A diagram containing all the relevant information may be theoretically built and used for the selection of adequate operating parameters for a given formulation.     

High catalytic activity of PdOx/MnO2 for CO oxidation and importance of oxidation state of Mn

PdO_x/MnO₂ has been examined as a catalyst for CO oxidation using a conventional flow reactor at reaction temperatures between 50 and 150°C. In the reaction conditions of GHSV (gashourlyspacevelocity) of 1.22 × 10⁵/h and CO concentration of 2000 ppm, PdO_x/MnO₂ showed higher catalytic activity compared with PdO_x/Mn₂O₃, which had been previously reported as an effective catalyst due to the cooperative action of Pd and Mn₂O₃ for this reaction. The reason for higher activity of PdO_x/MnO₂ than PdO_x/Mn₂O₃ has been investigated using TPR (temperatureprogrammed reduction) and XPS studies. TPR showed that PdO_x/MnO₂ could be reduced by CO at much lower temperature than PdO_x/Mn₂O₃. During the experiment of reduction and oxidation, XPS showed that the valence of Mn in the PdO_x/MnO₂ was between 4+ and 3+, which is higher than that of Mn in the PdO_x/Mn₂O₃ catalyst of which the valence has been reported to be between 3+ and 2+. It is known that in this catalyst system the support supplies oxygen onto Pd, where the oxidation occurs with adsorbed CO, and the ability of the support to provide oxygen improves the performance of the catalyst. Therefore, it was concluded that the readiness of MnO₂ to be reduced with maintaining a higher oxidation state showed higher CO oxidation activity than Mn₂O₃ as support for PdO_x.     

The kinetics of B‐a and P‐a type copolybenzoxazine via the ring opening process

The structure of benzoxazines is similar to that of phenolic resin through thermal self‐curing of the heterocyclic ring opening reaction that neither requires catalyst nor releases any condensation byproduct. These polybenzoxazine resins have several outstanding properties such as high thermal stability and high glass transition temperature. To better understand the curing kinetics of this copolybenzoxazine thermosetting resin, dynamic and isothermal differential scanning calorimetry measurements were performed. Three models, the Kissinger method, the Flynn–Wall–Osawa method, and the Kamal method, were used to describe the curing process. Dynamic kinetic activation energies based on Kissinger and Flynn–Wall–Osawa methods are 72.11 and 84.06 KJ/mol, respectively. The Kamal method based on an autocatalytic model results in a total order of reaction between 2.66 and 3.03, depending on curing temperature. Its activation energy and Arrhenius preexponential are 50.3 KJ/mol and 7959, respectively. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 95: 730–737, 2005     

Chemical Composition Determination at the Bottom Region of a Recovery Boiler Furnace by Direct Minimization of Gibbs Free Energy

An optimization strategy has been applied to describe the chemical composition at the furnace bottom in the Kraft recovery boiler of a pulp production process. The concentrations of each involved chemical species were calculated through an optimization approach, minimizing the Gibbs free energy of the system. Various systems were proposed and tested, assuming different chemical species and phases number. Because serious initialization problems were found at this stage for some of the proposed systems, an optimization heuristic method (PSO) was used for the first approach to the problem. Once the appropriate phases number and chemical species in the system were determined, the initialization problems disappeared and the use of a deterministic optimization method (SQP) became viable. The proposed approach has shown to be satisfactory to reproduce industrial data and also data reported in the open scientific literature.     

Smooth Loops from Unconstrained Video

Converting unconstrained video sequences into videos that loop seamlessly is an extremely challenging problem. In this work, we take the first steps towards automating this process by focusing on an important subclass of videos containing a single dominant foreground object. Our technique makes two novel contributions over previous work: first, we propose a correspondence‐based similarity metric to automatically identify a good transition point in the video where the appearance and dynamics of the foreground are most consistent. Second, we develop a technique that aligns both the foreground and background about this transition point using a combination of global camera path planning and patch‐based video morphing. We demonstrate that this allows us to create natural, compelling, loopy videos from a wide range of videos collected from the internet.     

Taking science education beyond schooling

Abstract

The shape and content of science education has always been articulated from the scientist's perspective. Recently, an increasing number of science educators have recognized the serious limitations of this perspective and have proposed to define scientific literacy from societal or citizenship perspectives. In this article, I argue that these alternatives will remain as limited as their predecessors unless the very structures of schooling are called into question. Furthermore, I argue that alternatives cannot be designed at the drawing board by theoreticians, but have to be grounded in praxis, thereby providing concrete trajectories along which science education can actually change.     

Stabilization of One‐Dimensional Schrödinger Equation with Variable Coefficient under Delayed Boundary Output Feedback

This article considers stabilization of a one‐dimensional Schrödinger equation with variable coefficient and boundary observation which suffers from an arbitrary given time delay. We design an observer and predictor to stabilize the system. The state is estimated in the time span where the observation is available, and also predicted in the time interval where the observation is not available. It is shown that the estimated state feedback stabilizes the system exponentially. A numerical simulation is presented to illustrate the effect of the stabilizing controller.     

A new adaptive backstepping Coulomb friction compensator for servo control systems

A new Coulomb friction compensator is proposed for servo control systems in this paper. The novelty of the new approach lies in its capability of assigning the eigenvalues of the resulting closed loop system while attacking the problem. First, based on the standard backstepping methodology, an implicit Lyapunov function, with part of the components being only symbolically constructed at the very beginning, is utilized. To increase the robustness of the system against disturbance and model inaccuracy, an integral term is employed in the design. Using part of the variable gradient method, we are able to turn the implicit Lyapunov function into an explicit one, which is positive definite, and whose time‐derivative is negative definite. Second, it will be shown that the resulting closed loop error system is a switched linear system with two possible active modes that share the same set of eigenvalues, which is at our disposal. Unlike the common adaptive control design methods, such as the Control Lyapunov Function approach, in which the gains are typically positive but otherwise arbitrary, and are hence difficult to choose and have a lack of connection with the system's performance, our new scheme imposes two further constraints on the gains. It turns out that we can then match these gains with the coefficients of the desired characteristic equation of the closed loop system. In this respect, the gains are linked to the system's overall performance, which is a new and very appealing feature for such a scheme. Finally, a procedure of constructing a common Lyapunov function is provided to prove exponential stability of the aforementioned switched linear system. In addition, using the invariance principle, we will show the convergence of the estimated Coulomb friction coefficient to its real value. Numerical simulations are given to validate the effectiveness of the design and its robustness against friction time‐variations. Compared to existing results, the proposed scheme is much simpler, hence, much more advantageous computationally. Copyright © 2009 John Wiley and Sons Asia Pte Ltd and Chinese Automatic Control Society