Magnet Safety Assessment for ITER

The ITER magnet system consists of structurally linked sets of toroidal (TF) and poloidal (PF) field coils, central solenoid (CS), and various support structures. The coils are superconducting, force flow Helium cooled with a Kapton-Glass-Epoxy multilayer insulation system. The stored magnetic energy is about 100GJ in the TF system and 20GJ in the PF-CS. Coils and structure are maintained at 4 K by enclosing them in a vacuum cryostat. The cryostat, comprising an outer envelope to the magnets, forms most of the second radioactivity confinement barrier. The inner primary barrier is formed by the vacuum vessel, its ports and their extensions. To keep the machine size within acceptable bounds, it is essential that the magnets are in close proximity to both of the nuclear confinement barriers. The objective of the magnet design is that, although local damage to one of the barriers may occur in very exceptional circumstances, large scale magnet structural or thermal failure leading to simultaneous breaching of both barriers is not credible. Magnet accidents fall into three categories: thermal (which includes arcing arising from insulation failure and local overheating due to discharge failure in the event of a superconductor quench), structural (which includes component mechanical failure arising from material inadequacies, design errors and exceptional force patterns arising from coil shorts or control failures), and fluid (Helium release due to cooling line failure). After a preliminary survey to select initial faults conceivable within the present design, these faults are systematically analyzed to provide an assessment of the damage potential. The results of this damage assessment together with an assessment of the reliability of the monitoring and protective systems, shows that the magnets can operate with the required safety condition.     

Design and performance evaluation of a banyan network basedinterconnection structure for ATM switches

This paper presents a new self-routing packet network called the plane interconnected parallel network (PIPN). In the proposed design, the traffic arriving at the network is shaped and routed through two banyan network based interconnected planes. The interconnections between the planes distribute the incoming load more homogeneously over the network. The throughput of the network under uniform and heterogeneous traffic requirements is studied analytically and by simulation. The results are compared with the results of the baseline network and another banyan network based parallel interconnection network. It is shown that, for the proposed design, a higher degree of heterogeneity results in better performance     

Van vleck paramagnetism of the diluted intermetallic compounds Pr1−x Y x Ni5 at fields up to 15 T

We have measured the 16 Hz susceptibility of the diluted Van Vleck paramagnets Pr_1−x Y _x Ni₅ withx=0.00, 0.05, 0.10. 0.20 at temperatures 1.5 K≤T≤50 K and magnetic fields up to 15T. Their Van Vleck type magnetic susceptibility χ(T, B, x) strongly depends on the field atB≥6 T. The temperatureT _max(B, x) of the maximum of χ(T, B, x) decreases at increasing the field from zero to 15 T by approximately one order of magnitude for all Pr_1−x Y _x Ni₅ compounds. Changing the dilutionx from zero to 0.20, the field whereT _max(B, x) strongly drops is increased from 9 T to 11 T. Our data agree qualitatively with the predictions of a point charge model which considers the Zeeman term in addition to the electronic exchange and the dominating crystal field contributions.     

Densification involved in the UV-based photosensitivity of silicaglasses and optical fibers

A comprehensive survey of photosensitivity in silica glasses and optical fiber is reviewed. Recent work on understanding the mechanisms contributing to germanium or aluminum doped fiber photosensitivity is discussed within the framework of photoelastic densification models     

A new lateral MOS-gated thyristor with controlling base-current

A new lateral MOS-gated thyristor, called the Base-Current-Controlled Thyristor, is described. This device is designed so that most holes at the on-stage reach the P base through the floating P⁺ region adjacent to the P base and the on-state MOSFET. At the turn-off stage, the interruption of the hole current to the P base due to switching off the above MOSFET occurs simultaneously with the conventional turn-off operation. The concept of this device is verified experimentally by using the fabricated lateral device with the external MOSFET. This device exhibits a better trade-off relation between the on-state voltage and the turn-off time compared uith the conventional MOS-gated thyristor     

The lattice dynamics of the Fe(tpa) (NCS)2 complex : light-induced excited spin state trapping effect

A light-induced excited spin state trapping (LIESST) experiment for a thermal gradual spin crossover complex, Fetris (2-pyridylmethyl) amine(NCS)2 or Fe(tpa) (NCS)2, was attempted for the first time. The high spin (HS) state after light inducement stayed metastable over a period of days without relaxation at 10 K. Intersystem relaxation from a high to a low spin (LS) complex occurred at 50 K after bleaching at 10 K. Investigation of the Mossbauer spectra of the LIESST and relaxation experiment indicated that the Debye–Waller factor was a correlation parameter of the HS fraction and that the co-operative effect played a role in the relaxation process for such a solid compound. This revised version was published online in November 2006 with corrections to the Cover Date.     

Influence of the quality of the heterointerface on the cyclotron resonance spectra of InAs/(AlGa)Sb heterostructures

Cyclotron resonance is measured in solitary type-II InAs-AlGaSb quantum wells grown by molecular-beam epitaxy under various growth conditions. Quantum oscillations observed in the cyclotron resonance spectra in InAs-GaSb samples are attributed to scattering by a short-range potential due to roughness of the heterointerface. A new method based on measurement of the cyclotron resonance spectra is proposed for assessing the quality of the heterointerface. Fiz. Tekh. Poluprovodn. 31, 1246–1248 (October 1997)     

Error-resilience improvement for block-transform video coders

An algorithm is presented to enhance the resilience of block-based video-coding algorithms against channel errors. The error-resilience algorithm described suggests the use of fixed length coding to alleviate the effect of Huffman coding on the synchronisation of the decode under erroneous conditions. The proposed mechanism modifies the order of transmission of the fixed-length video parameters to increase the chance of their arrival. Synchronisation words are sent at fixed-length intervals within the bit stream to reduce the possibility of the decoder falling on similar bit patterns within the bit stream. To limit the effect of error accumulation, the motion prediction process is halted and the differential coding of motion vectors is not applied. FEC techniques are applied on some error-sensitive segments of the reordered video bitstream. The effectiveness of the proposed error-resilience algorithm is evidenced by both subjective and objective results     

Nodal sensitivities as error estimates in computational mechanics

Summary This paper proposes the use of special sensitivities, called nodal sensitivities, as error indicators and estimators for numerical analysis in mechanics. Nodal sensitivities are defined as rates of change of response quantities with respect to nodal positions. Direct analytical differentiation is used to obtain the sensitivities, and the infinitesimal perturbations of the nodes are forced to lie along the elements. The idea proposed here can be used in conjunction with general purpose computational methods such as the Finite Element Method (FEM), the Boundary Element Method (BEM) or the Finite Difference Method (FDM); however, the BEM is the method of choice in this paper. The performance of the error indicators is evaluated through two numerical examples in linear elasticity.     

Snowboard traumatology: an epidemiological study

OBJECTIVE: To estimate the frequency of perioperative morbidities in patients who underwent anesthesia and a surgical procedure with no preoperative laboratory testing. MATERIAL AND METHODS: We conducted an electronic database search of medical records of 56,119 patients who underwent surgical or diagnostic procedures and anesthesia at Mayo Clinic Rochester in 1994 and found 5,120 who had no laboratory tests done within 90 days before the procedure. From this group, we randomly selected 1,044 patients (87 from each month) to document the absence of preoperative tests, the presence of preexisting disease (by organ system), the type of anesthetic agent, and the outcomes and tests intraoperatively and postoperatively. RESULTS: The 1,044 patients ranged in age from 0 to 95 years (median age, 21). No deaths or major perioperative morbidities occurred (0.0%; exact 95% confidence interval, 0.00 to 0.35%). Although 10 patients underwent blood typing and screening for antibodies immediately preoperatively, no blood transfusions were necessary. Intraoperatively, 17 laboratory tests and 1 electrocardiogram were obtained, and 3 results were abnormal. Postoperatively, 42 blood tests and 2 electrocardiographic procedures were performed. Five of the 42 blood tests showed abnormal results (hemoglobin levels in 3, serum sodium in 1, and arterial blood gases in 1). One electrocardiogram showed normal findings, and the other revealed normal results except for premature ventricular contractions. No laboratory test done intraoperatively or postoperatively was found to change surgical or medical management substantially. One patient who had unanticipated blood loss during an outpatient procedure was admitted to the hospital for observation. CONCLUSION: All 1,044 patients, 97% of whom were relatively healthy, with no recent laboratory testing safely underwent anesthesia and an operation. We conclude that patients who have been assessed by history and physical examination and determined to have no preoperative indication for laboratory tests can safely undergo anesthesia and operation with tests obtained only as indicated intraoperatively and post-operatively. Current anesthetic and medical practices rapidly identify perioperative indications for laboratory evaluation as they arise.