OGHAM: On-demand global hosts for mobile ad-hoc multicast services

Recent advances in pervasive computing and wireless technologies have enabled novel multicast services anywhere, anytime, such as mobile auctions, advertisement, and e-coupons. Routing/multicast protocols in large-scale ad-hoc networks adopt two-tier infrastructures to accommodate the effectiveness of the flooding scheme and the efficiency of the tree-based scheme. In these protocols, hosts with a maximal number of neighbors are chosen as backbone hosts (BHs) to forward packets. Most likely, these BHs will be traffic concentrations or bottlenecks of the network and spend significant amount of time forwarding packets. In this paper, a distinct strategy is proposed for constructing a two-tier infrastructure in a large-scale ad-hoc network. Hosts with a minimal number of hops to the other hosts rather than those with a maximal number of neighbors will be adopted as BHs in order to obtain shorter multicast routes. The problem of determining BHs can be formulated with linear programming. BHs thus found have the advantages of shorter relay and less concentration. Besides, BHs are selected on-demand and can be globally reused for different multicast groups without flooding again. Simulation results show that the proposed protocol has shorter transmission latency, fewer control/data packets and higher receiving data packet ratios than other existing multicast protocols. Besides, the two-tier infrastructure constructed by the proposed protocol is more stable.     

Design challenges of a 65 nm CMOS stacked folded differential PA structure for mobile communications

In this paper, a novel phase-locked loop (PLL) architecture with multiple charge pumps, which is used to design a fast-locking PLL and a low-phase-noise PLL, is proposed. The effective capacitance and resistance of the loop filter in terms of voltage is scaled up/down according to the locking status by controlling the magnitude and direction of the charge pump current. Two PLLs, one with a fast-locking characteristic and the other with a low-phase-noise characteristic, are designed and fabricated in a 0.35-μm CMOS process based on the proposed architecture. The fast-locking PLL has a locking time of less than 6 μs and a phase noise of −90.45 dBc/Hz at 1 MHz offset. The low-phase-noise PLL has a locking time of 25 μs, a phase noise of −105.37 dBc/Hz at 1 MHz offset, and a reference spur of −50 dBc. Both PLLs have an 851.2 MHz output frequency.     

Analysis and design of amplifiers and comparators in CMOS 0.35 μm technology

Design techniques and CAD tools for digital systems are advancing rapidly at decreasing cost, while CMOS analog circuit design is related mostly with the individual experience and background of the designer. Therefore, the design of an analog circuit depends on several factors such as a reliable design methodology, good modeling and technology characterization. Most of this work focuses on the analysis of several analog circuits, including their functionality, using different design methodologies. Initially the determination of two key design parameters (slope factor n and early voltage VA) and the g_m/I_D characteristics were derived from simulations. Then, the analysis and design of three diferent analog circuits are presented. A comparison is made between two design methodology applied to an analog amplifier design. The first one is a conventional approach where transistors are in saturation. The second one is based on the g_m/I_D characteristic, that allows a unified synthesis methodology in all regions of operation of the transistor. The analog modules for comparison and continuous filtering, that find vast applications today, are then analyzed and designed with the parameters and methodology proposed.     

Sensitivity enhancement of a flexible MEMS strain sensor by a field effect transistor in an all organic approach

We report a low-cost piezoresistive nanocomposite based organic micro electro mechanical system (MEMS) strain sensor that has been combined to an organic field effect transistor (OFET) with the objective of amplifying the sensitivity of the sensor. When the MEMS cantilever is strained by a mechanical deflection, the resulting variation of resistivity influences the gate voltage (V_GS) of the OFET and, hence, changes the drain current (I_DS) of the transistor. The present combination allows an enhancement of sensitivity to strain by a factor 3.7, compared to the direct detection of resistance changes of the nanocomposite. As a consequence, a low limit of detection of 24 ppm has been estimated in terms of strain transduction efficiency. Furthermore, the organic microsystem exhibits a short response time and operates reversibly with an excellent robustness.     

Polymers Containing Highly Polarizable Conjugated Side Chains as High‐Performance All‐Organic Nanodielectric Materials

The discovery of nanodipolar π‐conjugated oligomer‐containing polymers as high performance nanodielectric materials with high permittivity and low dielectric loss over a wide range of frequency (100 Hz–4 MHz) is reported. Terthiophene‐containing methacrylate polymers are synthesized by reversible addition fragmentation transfer (RAFT) polymerization. Both X‐ray and thermal studies indicate the formation of small crystalline domains of terthiophene side chains dispersed in amorphous matrix. The highly polarizable and fast‐responsive nanodipoles from the nanoscale crystalline domains (<2 nm) are believed to dictate the performance. These polymers uniquely satisfy nanodipole architectures conjectured two decades ago to guide the design of high performance nanodielectric materials. This unprecedented approach can be generalized to a variety of π‐conjugated oligomer‐containing polymers for the development of high energy density capacitor materials.     

Time-dependent competitive adsorption of milk proteins and surfactants in oil-in-water emulsions

Competitive adsorption of pure milk proteins and non-ionic surfactants has been studied in model oil-in-water emulsions (4 g kg^?1 β-lactoglobulin or β-casein, 200 g kg^?1 n-hexadecane) as a function of the age of the adsorbed protein layer at the oil-water interface. With β-lactoglobulin-stabilised emulsions containing oil-soluble surfactant C₁₂ E₂ (diethylene glycol n-dodecyl ether), there is found to be a steadily increasing amount of protein associated with the emulsion droplets over a few hours following emulsification. Addition of water-soluble surfactant Tween 20 (polyoxyethylene (20) sorbitan monolaurate) to a β-lactoglobulin-stabilised emulsion (with or without C₁₂E₂) leads to less protein displacement if the emulsion is aged prior to addition of Tween 20. Moderate additions of C₁₂E₂ or Tween 20 produce no time dependence in the competitive adsorption in β-casein-stabilised emulsions, although some time dependence is observed when C₁₂E₂ and a high concentration of Tween 20 are present together. Crystallisation of the oil phase in β-casein-stabilised emulsions at pH 7 leads to a lowering of the measured protein surface concentration, especially in the presence of C₁₂E₂ and a reduction in the surfactant to protein molar ratio required for complete protein displacement by water-soluble surfactant (Tween 20 or octaethylene glycol n-dodecyl ether). Under more acidic conditions of pH 5 or pH 3, the surface coverage and ease of displacement of β-lactoglobulin at the surface of liquid emulsion droplets is substantially different from that under neutral pH conditions.     

Une architecture massivement parallèle intégrée

This paper presents a new massively parallel MIMD architecture, halfway between the Connection Machine and hypercubes based on 32-bit processors. It is built from specific 8-bit processors arranged in a 2-D grid and communicating by message transfers. We discuss the communication problems, the instruction set of the basic processing unit, the programmation of the whole array and the use of a high level data-flow language.     

Multiscale vascular surface model generation from medical imaging data using hierarchical features

Computational fluid dynamics (CFD) modeling of blood flow from image-based patient specific models can provide useful physiologic information for guiding clinical decision making. A novel method for the generation of image-based, 3-D, multiscale vascular surface models for CFD is presented. The method generates multiscale surfaces based on either a linear triangulated or a globally smooth nonuniform rational B-spline (NURB) representation. A robust local curvature analysis is combined with a novel global feature analysis to set mesh element size. The method is particularly useful for CFD modeling of complex vascular geometries that have a wide range of vasculature size scales, in conditions where 1) initial surface mesh density is an important consideration for balancing surface accuracy with manageable size volumetric meshes, 2) adaptive mesh refinement based on flow features makes an underlying explicit smooth surface representation desirable, and 3) semi-automated detection and trimming of a large number of inlet and outlet vessels expedites model construction.     

D类放大器背后的奥秘

音频放大器的用途是在发声输出元件上复现输入音频信号,提供所需要的音量和功率水平-保证复现的忠实性、高效率以及低失真度.在这一任务面前,D类放大器表现出多方面的优势.     

The influence of packaging materials on RF performance

At frequencies beyond 1 GHz, every component of the IC package contributes to the RF performance, whether required or not. In this work, we study the effects of packaging materials namely, the substrate and the globtop/underfill material on RF performance. We have measured interconnects on two area-array CSPs, the ball grid array and the polymer stud grid array using IMEC’s MCM-D technology. The measurements on the package interconnect show that the losses in the package substrate material account for about 50% of the total losses at 1.8 GHz and this drops to less than 20% at 5.2 GHz. The losses due to impedance mismatch dominate the losses especially below 10 GHz and considerable improvement in performance cannot be obtained by using an improved/expensive substrate. The other study is about the influence of globtop/underfill materials on wirebonds (through 3D EM simulations) as well as on standard 50 Ω MCM-D transmission lines (through experiments). While a higher value of dielectric constant of the globtop/underfill material is better on wirebonds, the influence of loss tangent is felt only above values of 0.1. The influence of seven different globtop/undefill materials on 50 Ω transmission lines has been used to extract their dielectric constant and loss tangent values at 30 GHz. These results are very valuable since one can hardly find the properties of globtop/underfill materials beyond 1 GHz.