Wind erosion of sand placed inside a rectangular box

This paper shows some experimental results on wind erosion of sand particles, placed inside a rectangular box with the upper surface exposed to the flow. Data presented were achieved from a wind tunnel simulation. Results include erosion rate, free-surface profile change, vertical deformation rate, and also flow topology for several loose boundary geometries. Some visualization tests illustrate the path of particles, depicturing how the eroded bed evolutes.The main objective of this work is focused on the achievement of data useful for the benchmark of numerical models dealing with wind erosion phenomenon, in situations where the free-surface changes due to the removal and/or deposition of granular particles. Practical cases related with the present work include situations where coal particles are removed from stockyard piles, or dust is released during transportation of a granular material in open containers.     

Production and characterization of Si-N films obtained by r.f. magnetron sputtering

Si-N films were deposited by sputtering from an Si₃N₄ target with different deposition pressures and negative substrate bias. The films were amorphous and showed a “featureless” morphology. A high oxygen content was detected in unbiased films. For these films the Si/N ratio was very high compared with the target composition, whereas for biased films the opposite was observed. Si-N films presented cohesive failures for loads as high as 21 N and adhesive failure at 45 N when they were analysed by scratch test. Very high hardness (45 GPa) was obtained, particularly for biased films. Unbiased films were softer, which is attributed to the formation of silicon oxide and/or to a lower compressive stress level.     

From outpost to outback: project career paths in Australia

With the growth in project management as a form of work organisation in many sectors of the economy has come the significant rise in the number of project managers and project team members. This change in work organisation brings issues in forging career paths and determining career support in work situations that are often dynamic, short lived and intense. In the relatively small but substantially robust Australian economy, a unique labour market and the tyranny of distance bring their own difficulties. Innovative and collaborative project structures and increasing prevalence of contract work provide both challenges and opportunities for new career pathways in many industries. A growing percentage of Australia's workforce is employed in project-based or project-oriented organisations, leading to the claim that Australia is a project-based economy. This provided a context for our research into the career paths and the issues of career management for project managers working in a project based economy. Using in-depth interviews with project managers from three industry areas we found generational and gender differences in experiences of work, workplace support and mentoring for career development. For a continued strong performance in this economy, organisations that employ project personnel will need to consider how they will ensure the supply of high quality project professionals into the future.     

Decision support systems in water resources in the demarcated region of Douro – case study in Pinhão river basin,Portugal

This paper puts forward the importance of decision support systems (DSS) for the planning and management of water resources. A case study of the Pinhão river basin, in Portugal, is presented. Given the importance of vineyards in the Douro region, it is important to determine if water availability will be enough to meet present and future water demands. In order to answer this question, DSS tools were used to assess different scenarios. The MIKE BASIN software was used in the hydrographical basin of Pinhão river, assisted by a geographic information system, GIS, which allowed the modelling of the basin, both temporally and spatially, facilitating the visualisation and interpretation of results. According to the attained results, it was verified that, at present, the hydrographical basin meets the considered water needs. The DSS proved to be an important tool to assist the decision‐making process in the studied river basin.     

Fate of LCFA in the co-digestion of cow manure, food waste and discontinuous addition of oil

Different concentrations of oily waste were added in a discontinuous mode and recurrently to anaerobic continuous stirred tank reactors fed with cow manure and food waste. Four continuous stirred tank reactors were run in parallel. A control reactor (R1) received no additional oil and R2, R3 and R4 received increasing concentrations of oil in two different experimental approaches. First, the lipids composition was forced to change suddenly, in three moments, without changing the total chemical oxygen demand (COD) fed to the reactors. The only long chain fatty acid (LCFA) detected onto the R1 solid matrix was palmitic acid (C16:0). Nevertheless in the solid matrix of R2, R3 and R4 C16:0 and stearic acid were detected. For occasional increase in the oil concentration up to 7.7 gCOD_oil/L_reactor (55% Oil_COD/Total_COD) no statistical differences were detected between the reactors, in terms of methane production, effluent soluble COD, effluent volatile fatty acids and total and volatile solids removal. Therefore this experiment allowed to conclude that cow manure–food waste co-digestion presents sufficient buffer capacity to endure solid-associated LCFA concentration up to 20–25 gCOD-LCFA/kgTS.In a second experiment higher concentrations of oil were added, raising occasionally the concentration in the reactors to 9, 12, 15 and 18 gCOD_oil/L_reactor. All pulses had a positive effect in methane production, with the exception of the highest oil pulse concentration, that persistently impaired the reactor performance. This experiment demonstrates that threshold values for LCFA and C16:0 accumulation onto the solid matrix, of about 180–220 gCOD-LCFA/kgTS and 120–150 gCOD-C16:0/kgTS, should not be surpassed in order to prevent persistent reactor failure, as occurs in some full scale co-digestion plants.     

Numerical analysis of piping elbows for in-plane bending and internal pressure

This work presents the development of two different finite piping elbow elements with two nodal tubular sections for mechanical analysis. The formulation is based on thin shell displacement theory, where the displacement is based on high-order polynomial or trigonometric functions for rigid-beam displacement, and uses Fourier series to model warping and ovalization phenomena of cross-tubular section. To model the internal pressure effect an additional formulation is used in the elementary stiffness matrix definition. Elbows attached to nozzle or straight pipes produce a stiffening effect due to the restraint of ovalization provided by the adjacent components. When submitted to any efforts, the excessive oval shape may reduce the structural resistance and can lead to structural collapse. For design tubular systems it is also important to consider the internal-pressure effect, given its effect on the reduction of the pipe flexibility. Some conclusions and examples are compared with results produced by other authors.     

QUANTIFICATION OF BINARY MIXTURES OF COCAINE AND ADULTERANTS USING DISPERSIVE RAMAN AND FT-IR SPECTROSCOPY AND PRINCIPAL COMPONENT REGRESSION

Current forensic methods for detecting and identifying cocaine and its adulterants are destructive, so evidence cannot be re-analyzed. Vibrational techniques [Raman and Fourier transform infrared (FT-IR) spectroscopy] allow rapid, economical, nondestructive analysis. This work compares these techniques as methods for quantifying mixtures of cocaine (in the crack presentation) and adulterants. The aim is to provide a method to determine the amount of cocaine in crack rocks and to identify and quantify possible adulterants. A sample of crack was adulterated with benzocaine, caffeine, sodium carbonate, and lidocaine to create binary mixtures of concentrations of 20%, 40%, 60%, and 80%; pure samples of each adulterant and of crack were also examined. All samples were observed using dispersive Raman and attenuated total reflectance FT-IR spectroscopy. Quantitative analysis was performed based on principal component regression (PCR) applied to simulated and real spectra. The PCR model revealed that the Raman spectra yielded only minor measurement errors and the highest correlations using the PC2 spectral vector, which presented spectral features of cocaine. Among the mixtures, the best and worst results were obtained for caffeine and sodium carbonate, respectively. Dispersive Raman spectroscopy outperformed FT-IR in the quantitative determination of binary mixtures of cocaine and adulterants.     

Quantification of anhydrous ethanol and detection of adulterants in commercial Brazilian gasoline by Raman spectroscopy

Raman spectroscopy can be used to evaluate the quality of fuels in a remote, rapid, and nondestructive manner without the need for reagents. In this study, Raman was used to quantify anhydrous ethanol in commercial gasoline and to detect peaks due to compounds commonly used for the adulteration of commercial gasoline. Samples of commercial gasoline were collected from fuel stations in the region of Santos, SP, Brazil. Samples of naphtha from the refinery, pure ethanol, and ethanol diluted in distilled water at concentrations close to the range used in the gasoline were also obtained and characterized. Raman spectra were collected using a dispersive Raman spectrometer (830?nm, 2?cm^?1 resolution in the 400–1800?cm^?1 spectral range). As expected, the spectra of commercial gasoline showed pronounced peaks of naphtha and ethanol. By using the peak intensities of the ethanol diluted in water, the ethanol concentration was found to be in the range of 27%?±?1% in most of the samples; some samples presented ethanol concentrations as high as 28.8%, suggesting adulteration. Some samples presented peaks at 766, 798, and 995?cm^?1 with higher intensities, suggesting the presence of an adulterant with organic characteristics, such as solvents with aromatic rings. Raman spectroscopy has been shown to be effective in determining the adulteration of commercial gasoline, which may contribute to rapid quality control of fuels at the point of sale.     

Computed microtomography evaluation of calcium hydroxide‐based root canal dressing removal from oval root canals by different methods of irrigation

The aim of this study was to evaluate the capacity of conventional irrigation, passive ultrasonic irrigation (PUI), and Easy Clean for removing calcium hydroxide‐based root canal dressing from oval root canals. Thirty mandibular uniradicular incisors with oval canals were used, and subjected to chemical–mechanical preparation with Reciproc R40 instruments. The main canal was filled with a paste based on Ca(OH)₂ P.A., iodoform and propylene glycol in the ratio of 3:1:1. The teeth were stored in 100% humidity at a temperature of 37°C for 14 days. Afterwards, the teeth were divided into three groups (n = 10) according to the method of irrigation used (conventional irrigation, PUI, and Easy Clean). The specimens were analyzed by computed microtomography at three time intervals: before placing the root canal dressing, with the root canal dressing in place, and after application of the irrigation methods for removing it. The data were submitted to Kruskal–Wallis and Dunn tests for analyzing the canal as a whole, and Friedman and Dunn for analyzing the root thirds. The results showed that conventional irrigation was less efficient for removing the root canal dressing in comparison with the methods that agitated the irrigant solution (p < .05). When the root canal was analyzed as a whole, Easy Clean, and PUI were similar (p > .05). In analysis of the thirds, Easy Clean was more efficient than conventional irrigation in all the thirds, while PUI showed this behavior only in the cervical third (p < .05). The authors concluded that in oval canals, none of the irrigation methods were capable of removing all the root canal dressing, however, the methods that agitated the irrigant solution were more efficient than conventional irrigation.     

A morphological analysis of the transition between the embryonic primitive intestine and yolk sac in bovine embryos and fetuses

The yolk sac (YS) is the main source of embryonic nutrition during the period when the placenta has not yet formed. It is also responsible for hematopoiesis because the blood cells develop from it as part of the primitive embryonic circulation. The objective of this study was to characterize the transitional area between the YS and primitive gut using the techniques of light microscopy, transmission electron microscopy, and immunohistochemistry to detect populations of pluripotent cells by labeling with Oct4 antibody. In all investigated embryos, serial sections were made to permit the identification of this small, restricted area. We identified the YS connection with the primitive intestine and found that it is composed of many blood islands, which correspond to the vessels covered by vitelline and mesenchymal cells. We identified large numbers of hemangioblasts inside the vessels. The mesenchymal layer was thin and composed of elongated cells, and the vitelline endodermal membrane was composed of large, mono‐ or binucleated cells. The epithelium of the primitive intestine comprised stratified columnar cells and undifferentiated mesenchymal cells. The transitional area between the YS and the primitive intestine was very thin and composed of cells with irregular shapes, which formed a delicate lumen containing hemangioblasts. In the mesenchyme of the transitional area, there were a considerable number of small vessels containing hemangioblasts. Using Oct4 as a primary antibody, we identified positive cells in the metanephros, primordial gonad, and hepatic parenchyma as well as in YS cells, suggesting that these regions contain populations of pluripotent cells. Microsc. Res. Tech. 76:756–766, 2013. © 2013 Wiley Periodicals, Inc.