Genotoxic and mutagenic effects of permethrin in mice: Micronuclei analysis in peripheral blood erythrocytes

Pyrethroids such as permethrin are synthetic compounds widely used in the agriculture of many countries to combat plagues and in domestic products, such as acaricides. Not so long ago these chemicals were characterized as non‐toxic for non‐target organisms; however, recent studies have showed that these compounds could present toxic potential for many organisms. In this sense, this study presents genotoxic and mutagenic potential of permethrin administered intraperitoneally in mice under artificial conditions by the use of micronucleus assay in the peripheral blood of these animals. The mice were divided into five groups: group I = negative control (distilled water), group II = positive control (cyclophosphamide), group III = 30% of permethrin LD₅₀ (96 mg/kg), group IV = 50% of permethrin LD₅₀ (160 mg/kg), and group V = 80% of permethrin LD₅₀ (256 mg/kg). The peripheral blood was collected 24, 48, and 72 h after treatment. Results showed that all the tested permethrin dosages presented genotoxic and mutagenic effects 24 h after treatment, which would contradict the classification of this chemical product as moderately toxic, i.e., unable to cause damages to the cell DNA. Microsc. Res. Tech. © 2012 Wiley Periodicals, Inc.     

Extracting local mechanical properties of steel bars by means of instrumented flat indentation

The evaluation of local mechanical properties of metal parts can be used for the prediction of forming and cutting forces during the following working stages. In order to show the feasibility of using indentation tests for work-piece characterization, C40 steel disks were cut from an extruded bar and machined by facing operation under different conditions. Indentation tests were carried out with 1 mm and 2 mm diameter indenters made of tungsten carbide; yield strength and indentation pressure values were extracted along the diameter of each disk. For the first time, indentation results were used to extract local mechanical properties of steel bars as a function of their process conditions: it was observed that small pins gave information on the effect of the machining process whereas large pins were more suitable to evaluate work-piece bulk properties.     

Degenerative process and cell death in salivary glands of Rhipicephalus sanguineus (Latreille, 1806) (Acari: Ixodidae) semi-engorged female exposed to the acaricide permethrin

Ticks are ectoparasites of great medical and veterinary importance around the world and synthetic chemicals such as permethrin have been used for their control. This study provides a cytochemistry analysis of both degenerative and cell death processes in salivary glands of the brown dog tick Rhipicephalus sanguineus semi-engorged females exposed to 206, 1,031, and 2,062 ppm of permethrin. The results presented herein demonstrate that permethrin is a potent chemical acaricide that would act on the glandular tissue's morphophysiology in this tick species by eliciting severe changes in the acinus shape, intense vacuolation of the acinar cells' cytoplasm, marked glandular tissue disorganization, culminating in an advanced degenerative stage with consequent formation of many apoptotic bodies (cell death). In addition, permethrin induced major changes in the acinar cells' nucleus, such as a change both in its shape and size, chromatin marginalization, nuclear fragmentation, and appearance of picnotic nuclei, especially when the highest concentrations of the product were used. Thus, permethrin induced early degeneration of this tissue characterized by significant changes in the structure of acinar cells and production of enzymes related to the cell death process, in addition to interfering directly in the genetic material of these cells.     

Morphological characterization of the nymphs Rhipicephalus sanguineus ticks (Latreille, 1806) (Acari: Ixodidae). Description of the testes, integument, Malpighian tubules, and midgut on the detachment day

This study presents the morpho-histological and histochemical characterization of the testes, integument, Malpighian tubules, and midgut of engorged Rhipicephalus sanguineus nymphs on the detachment day, showing the morphological and physiological characteristics to this phase in the life cycle of these individuals. The testis is constituted by germinative cells (only spermatogonia) with large, round-shaped and strongly stained nuclei which are organized into cysts by a thin layer of somatic cells. The integument consists of a cuticle subdivided into epicuticle (lipoprotein) and procuticle (glycoproteic), and a layer of epithelial cells which present glycolipoprotein elements. The procuticle presents two distinct regions: the exocuticle (next to the epicuticle) and the endocuticle (next to the epithelial layer). The Malpighian tubules present a simple epithelium with small flat and/or cubic cells, which form its wall and delimitates a lumen full of lipoprotein material. The midgut consists of an epithelial wall formed by two types of digestive cells, spent cells and empty digest cells, and by generative cells supported by a basal lamina and a thin layer of muscular tissue. This study described the main organs of engorged nymphs of R. sanguineus, to generate information that can help researchers to better understand the biology of these ectoparasites; which is fundamental for the development of compounds that are less aggressive to the environment. In addition, if the immature stages of the ticks are controlled, the number of adult ticks able to cause damages to the animals--and to the man as well--is also under control.     

Hematopoietic progenitor constituents and adherent cell progenitor morphology isolated from black-rumped agouti (Dasyprocta prymnolopha, Wagler 1831) bone marrow

Stem cells are present in the adult tissues of most diverse species. Bone marrow is recognized to be the most exploited site to obtain stem cells and cell progenitors. The objective of the present study was to characterize hematopoietic progenitor (HP) morphology and analyze the performance of adherent cell progenitors (ACPs) cultivated in vitro from black‐rumped agouti bone marrow (Dasyprocta prymnolopha). Bone marrow aspirates were obtained from tibia crest and used to prepare histological slides and identify cell morphology. Cells were also scattered on culture plates for later isolation, expansion, and quantification. Smears obtained from bone marrow demonstrated HPs at different stages of maturity. In culture, these cells showed fibroblastoid morphology and a strong tendency to form colonies, demonstrated by the presence of cell aggregates, cytoplasmic elongations lying side by side. An 80% cell confluence was observed at 18 days in culture and progressive reduction in the percentage of nonadherent mononuclear cells. After eight passes, a mean cell viability of 96.07% was observed, from a pool of 1.6 × 10⁷ cells (ACP). Thirteen 25‐cm² culture bottles were trypsinized, resuspended in freezing medium, stored in 14 criotubes at a concentration of 1 × 10⁶ cells per milliliter, and placed in liquid nitrogen at ?196°C. Agouti bone marrow demonstrated high plasticity, moreover different HP lines, and a population of adherent cells demonstrated morphology similar to mesenchymal stem cells in culture. Microsc. Res. Tech. 2012. © 2012 Wiley Periodicals, Inc.     

Analysis of friction in the ejection of thermoplastic mouldings

The ejection force of injection-moulded thermoplastics depends on the contact conditions at the moment of ejection. Replication of the polymer part surface occurs onto the mould surface during injection of the melt. Ejection takes place in a very short time, hence the static coefficient of friction must be considered for modelling the ejection process. To understand the contribution of the mechanisms involved in the friction during the ejection stage, a mixed approach was followed: analytical simulation of the ploughing, numerical simulation of the deformation, and experimental inference of the adhesion. The relevance of roughness, temperature and contact pressure in the coefficient of friction was evidenced.     

Influence of Surface Finishing on the Tribological Behavior of Self-Lubricating Iron-Based Composites

Recently, we presented the tribological evaluation of self-lubricating sintered steels produced by taking advantage of the powder injection molding process, the recently introduced plasma-assisted debinding and sintering process, and the in situ formation of solid lubricant particles. This new processing route promotes the in situ generation of nanostructured turbostratic graphite particles during silicon carbide dissociation. In this work, we present the influence of surface finishing on the tribological behavior of self-lubricating composites sintered at 1150°C with (3 and 5 wt%) and without SiC additions. We discuss the effects of the surface topography (R_a) on the friction coefficient and wear rates of specimens and counterbodies. The tribological behavior was analyzed using linear reciprocating sliding tests (constant load of 7 N, 60-min duration). It was shown that the reduction in surface roughness increased both the friction coefficients and wear rates of specimens and counterbodies, probably due to plastic deformation and consequent graphite reservoir sealing. Chemical analyses of the wear scars using scanning electron microscopy (SEM) and energy-dispersive X-ray (EDX) analysis showed a tribolayer that was composed predominantly of carbon and oxygen. Analyses of the wear scars showed traces of plastic deformation on both samples and counterbodies and the predominance of abrasion as the main wear mechanism.     

Multiphase materials with lignin. XII. Blends of poly(vinyl chloride) with lignin–caprolactone copolymers

A previously described starlike copolymer consisting of a lignin derivative (hydroxypropyl lignin) and caprolactone has been blended with poly(vinyl chloride) (PVC) over a composition range of 0–100%. Solvent-cast films of the blends were examined with regard to thermal, mechanical, crystallinity, and morphological characteristics. In addition, the blends were examined with regard to aging effects. The results suggest that the lignin/caprolactone copolymer forms either a miscible (by thermal analysis) or a nearly miscible (with phase dimensions in the order of 10–30 nm) system in which physical properties are modified over a wide range of modulus and elongation. Blends with copolymer content exceeding 50% reveal partial caprolactone crystallinity that increases with age. Lignin derivative not copolymerized with caprolactone, by contrast, produces macrophase-separated structures with exceedingly poor properties. Lignin caprolactone starlike copolymers are materials ideally suited as plasticizers for PVC. © 1994 John Wiley & Sons, Inc.     

The greatest co-authorships of finance theory literature (1896–2006): scientometrics based on complex networks

Scientometrics - We use some modern scientometrics tools to detect which articles written in co-authorship are the most influential in the finance theory literature from 1896 to 2006. To develop a...     

An adaptive sharing elitist evolution strategy for multiobjective optimization

Almost all approaches to multiobjective optimization are based on Genetic Algorithms (GAs), and implementations based on Evolution Strategies (ESs) are very rare. Thus, it is crucial to investigate how ESs can be extended to multiobjective optimization, since they have, in the past, proven to be powerful single objective optimizers. In this paper, we present a new approach to multiobjective optimization, based on ESs. We call this approach the Multiobjective Elitist Evolution Strategy (MEES) as it incorporates several mechanisms, like elitism, that improve its performance. When compared with other algorithms, MEES shows very promising results in terms of performance.