Subjective visual vertical in virtual reality (Curator SVV): validation and normative data

Subjective visual vertical (SVV) assesses the ability to perceive verticality, which is a measure of vestibular otolithic function. Vestibular lesions influence this perception of verticality. We developed a method using virtual reality (VR) display and an Android software application named ‘Curator SVV’. The virtual reality SVV (Curator SVV) consisted of ten readily identifiable artworks projected by a Samsung phone S6 which is inserted into a virtual reality headset. In the first study, 20 patients had there SVV assessed with two devices: (1) a commercially available SVV measurement device (VestiTest^®) and (2) a virtual reality SVV using the Curator SVV application. In a second study, 32 healthy subjects had their SVV assessed by the Curator SVV application whilst sitting in a chair. In the first study, there was no significant difference (p = 0.44, paired t test and p = 0.01, test of equivalence) between results obtained by Curator SVV and the commercially available device. In the second study, the average angle measured for healthy subjects was 0.00° ± 0.85°. The normal range (mean ± 2 SD) was ± 2° in standard upright position. We were able to demonstrate that the Curator SVV can be readily employed as an objective, non-invasive and affordable means of assessing otolith function in the clinical context. We validated this novel methodology by finding strong quantitative parity between a standard commercial SVV unit and the VR Curator SVV method. Our very lightweight and mobile device can be employed in clinical contexts including at the bedside and in different head and body positions.     

An electrochemical approach to total organic carbon control in printed circuit board copper sulfate plating baths Part II: Overall system

An electrochemical system for oxidative removal of high levels of total organic carbon (TOC) in printed circuit board (PCB) copper sulfate plating baths has been developed. These organic contaminants build-up over the course of pattern plating of PCBs, and at high concentrations they interfere with the quality of the plated copper. The chemistry of the electrochemical oxidation of the plating bath contaminants was qualitatively followed using high performance liquid chromatography (HPLC) and chemical oxygen demand (COD) measurements. A complete treatment system is described and rough calculations are given showing, for a given set of conditions, how the proper choice of electrode material and current density can minimize the system cost.     

CFRP Tendons for the Repair of Posttensioned, Unbonded Concrete Buildings

The deterioration attributable to corrosion of concrete structures reinforced with unbonded, posttensioned tendons is a costly problem. Recent research has shown composite materials such as fiber-reinforced polymers (FRP) to be suitable alternatives to steel because they provide similar strength without susceptibility to electrochemical corrosion. Carbon-FRP (CFRP) in particular has great promise for prestressed applications because it shows resistance to corrosion in environments that might be encountered in concrete and experiences less relaxation than steel. This paper outlines the testing and implementation of a posttensioned system that uses CFRP tendons to replace corroded, unbonded posttensioned steel tendons. This system was then implemented in a parking garage in downtown Toronto. To the writers’ knowledge, this is the first example of an unbonded, posttensioned tendon replacement using FRP tendons. The system used split-wedge anchors designed specifically for CFRP tendons. The dead end was anchored by directly bonding the tendon to the concrete slab. The CFRP tendon was successfully inserted in the opening created by the removal of the corroded tendon and stressed. Although the system was shown to be feasible, the current anchorage configuration results in load losses of up to 60% during the transfer. Changing the orientation of the anchor was found to reduce the load loss to an acceptable range of 1–9%.     

Fire Injury Reduces Inducible Defenses of Lodgepole Pine against Mountain Pine Beetle

We examined the effect of wildfire injury on lodgepole pine chemical defenses against mountain pine beetle. We compared the constitutive phloem chemistry among uninjured, lightly-, moderately-, and severely-injured trees, and the induced chemistry elicited by simulated beetle attack, among these same categories. We also compared the entry rates of caged female beetles into trees of these categories. The volatiles we studied included thirteen monoterpene hydrocarbons, four allylic monoterpene alcohols, one ester, and one phenyl propanoid, of which the monoterpene hydrocarbons always comprised 96% or more of the total. Fire injury reduced the total concentration of these compounds in the induced but not constitutive phloem tissue of lodgepole pines. Fire injury also affected the relative composition of some volatiles in both induced and constitutive phloem. For example, increased fire injury reduced 4-allylanisole, a host compound that inhibits mountain pine beetle aggregation. Increased fire injury also increased (−) α-pinene, which can serve as precursor of pheromone communication. However, it also reduced myrcene and terpinolene, which can serve as stimulants and synergists of pheromone communication. Beetle entry did not show statistical differences among fire injury categories, although there was a trend to increased entry with fire injury. These results suggest that the reduced ability of trees to mobilize induced chemical defenses is an important mechanism behind the higher incidence of attack on fire-injured trees in the field. Future studies should concentrate on whether beetles that enter fire-injured trees are more likely to elicit aggregation, based on the differences we observed in volatile composition.     

The Influence of Pt Loading,Support and Nafion Content on the Performance of Direct Methanol Fuel Cells: Examined on the Example of the Cathode

Nano‐sized Pt colloids were prepared using the polyol method and supported on Ketjen black EC 600J (KB), Vulcan XC‐72 (VC) and high surface area graphite 300 (HG). The effects of the Nafion ionomer content, and the Pt loading of the cathode catalyst layer as well as the Pt loading on the support on the performance of direct methanol fuel cells (DMFCs), were studied. The membrane electrode assemblies (MEAs) were analysed using current–voltage curves, cyclic voltammetry, electrochemical impedance spectroscopy (EIS) and adsorbed CO stripping voltammetry. Optimum Nafion to carbon (N/C) ratios (N/C being defined as the weight ratio of the Nafion ionomer to the carbon) were determined. The optimum N/C ratios were found to depend on the support as follows, 1.4, 0.7 and 0.5 for Pt/KB, Pt/VC and Pt/HG, respectively and to be independent of the Pt/C loading range of 20–80 wt% tested in this work. The highest DMFC performances, as well as the highest electrochemical active surface areas, and improved gas diffusivities, were achieved using these ratios. For the catalysts prepared in this work, the average Pt crystallite size was found to decrease with increasing surface area of the support for a particular Pt loading. MEAs made using KB as support and the optimal N/C ratio of 1.4 showed the best performances, i.e. higher than the VC and HG supports for any N/C ratio. The highest DMFC performance was observed using 60 wt% Pt on KB cathode electrodes of 1 mg Pt cm^–2 loading and an N/C value of 1.4. For all three supports studied, the 60 wt% Pt on carbon loading resulted in the best DMFC performance. This may be linked to the Pt particle size and catalyst preparation method used in this work. In comparison to literature results, high DMFC performances were achieved using relatively ‘low' Pt and Ru loadings. For example, a maximum power density of >100 mW cm^–2 at 60 °C was observed using a 1 mg Pt cm^–2 cathode loading and a 2 mg PtRu cm^–2 anode loading.     

Selective cardiovascular effects of stress and cigarette smoking in young women.

Used a 2?×?2 (smoke/no smoke?×?stress/no stress) factorial design to evaluate the impact of stress and smoking on the cardiovascular responses of 43 female undergraduates and college staff (mean age 20.7 yrs). The stressor was a video game. Results reveal that the combination of stress and cigarette smoking produced blood pressure and heart rate responses that were larger than the additive effects of smoking and stress taken separately. (36 ref) (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Components of Type A, hostility, and anger-in: Further relationships to angiographic findings.

In a previous study of 131 patients undergoing angiography, the 2nd author et al (in press) reported that of all components of the Type A (coronary prone) behavior pattern (TABP), only potential for hostility and anger-in were significantly associated with extent of coronary artery disease (CAD). Ss had been assessed with R. H. Rosenman's (1978) structured interview, by which the S's voice mannerisms served as the principal criteria for making the Type A designation. The present study was undertaken to replicate these findings using a different patient population. Tape-recorded structured interviews from 125 male angiography patients (aged 21–69 yrs) were scored blindly using the component scoring system employed in the previous study. Results confirm the previous findings. Global TABP was completely unrelated to extent of CAD, while potential for hostility and anger-in were significant independent predictors of disease severity. These findings argue for a reconceptualization of the manner in which the TABP is defined and assessed. (28 ref) (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

An objective measure for the visual fidelity of virtual reality and the risks of falls in a virtual environment

Despite decades of development of virtual reality (VR) devices and VR’s recent renaissance, it has been difficult to measure these devices’ effectiveness in immersing the observer. Previously, VR devices have been evaluated using subjective measures of presence, but in this paper, we suggest that postural stability can be used to objectively assess visual fidelity of VR headsets. We validated this measure by testing known differences between the devices. This study also aimed to determine the stability of healthy participants, while in a stable virtual world, compared to eyes-open and eyes-closed conditions and therefore provide a standard of safety requirements for future experimentation. Participants’ ability to maintain a stable centre of pressure was measured using a Wii Balance Board, covered by a foam pad. Stability in eyes-open and eyes-closed conditions was compared with: (1) an iPod Touch in a simple Google cardboard style headset, (2) the Oculus Rift Development Kits (DK) DK1, DK2, with and without the tracking of linear head movements, and (3) the Samsung Gear VR. With a stable VR visual stimulus, the eyes-open condition allowed for significantly greater postural stability than the other conditions, which supports the validity of posturography as a measure of visual fidelity. Further, the iPod Touch, with its narrow field of view and rudimentary software, was significantly less effective at destabilising participants with visual perturbations than the other headsets, with their wider field of view and time warping. Unexpected results are discussed with respect to the possible limitations of the experimental design.