Migration behavior of landfill leachate contaminants through alternative composite liners

Four identical pilot-scale landfill reactors with different alternative composite liners were simultaneously operated for a period of about 540 days to investigate and to simulate the migration behaviors of phenolic compounds (phenol, 2-CP, 2-MP, 3-MP, 4-MP, 2-NP, 4-NP, 2,4-DNP, 2,4-DCP, 2,6-DCP, 2,4,5-TCP, 2,4,6-TCP, 2,3,4,6-TeCP, PCP) and heavy metals (Pb, Cu, Zn, Cr, Cd, Ni) from landfill leachate to the groundwater. Alternative landfill liners of four reactors consist of R1: Compacted clay liner (10 cm + 10 cm, k = 10⁻⁸ m/sn), R2: Geomembrane (2 mm HDPE) + compacted clay liner (10 cm + 10 cm, k = 10⁻⁸ m/sn), R3: Geomembrane (2 mm HDPE) + compacted clay liner (10 cm, k = 10⁻⁸ m/sn) + bentonite liner (2 cm) + compacted clay liner (10 cm, k = 10⁻⁸ m/sn), and R4: Geomembrane (2 mm HDPE) + compacted clay liner (10 cm, k = 10⁻⁸ m/sn) + zeolite liner (2 cm) + compacted clay liner (10 cm, k = 10⁻⁸ m/sn). Wastes representing Istanbul municipal solid wastes were disposed in the reactors. To represent bioreactor landfills, reactors were operated by leachate recirculation. To monitor and control anaerobic degradation in the reactors, variations of conventional parameters (pH, alkalinity, chloride, conductivity, COD, TOC, TKN, ammonia and alcaly metals) were also investigated in landfill leachate samples. The results of this study showed that about 35-50% of migration of organic contaminants (phenolic compounds) and 55-100% of migration of inorganic contaminants (heavy metals) to the model groundwater could be effectively reduced with the use of bentonite and zeolite materials in landfill liner systems. Although leachate contaminants can reach to the groundwater in trace concentrations, findings of this study concluded that the release of these compounds from landfill leachate to the groundwater may potentially be of an important environmental concern based on the experimental findings.     

Efficiency calculation of feed structures and optimum number of antenna elements in a subarray for highest G/T

For an antenna array, different feed structure topologies may yield the same radiation characteristics. However, different topologies may result in different efficiency and noise performance. In this paper, parallel arm antenna arrays are analyzed for efficiency and noise temperature using the noise equivalent line length method (NELL) with the number of antenna elements in a subarray as a parameter. It is shown that efficiency of an antenna array feed structure as well as its noise temperature can be calculated using the NELL method. The comparison of the two parameters, efficiency and noise temperature, yield the optimum number of antenna elements in a subarray of a parallel arm antenna array for the highest G/T ratio.     

Voltage imaging of epileptiform activity in slices from rat piriform cortex: onset and propagation

The piriform cortex is a temporal lobe structure with a very high seizure susceptibility. To investigate the spatiotemporal characteristics of epileptiform activity, slices of piriform cortex were examined by imaging electrical activity with a voltage-sensitive fluorescent dye. Discharge activity was studied for different sites of stimulation and different planes of slicing along the anterior-posterior axis. Epileptiform behavior was elicited either by disinhibition with a gamma-aminobutyric acid-A receptor antagonist or by induction with a transient period of spontaneous bursting in low-chloride medium. Control activity recorded with fluorescent dye had the same pharmacological and temporal characteristics as control activity reported previously with microelectrodes. Simultaneous optical and extracellular microelectrode recordings of epileptiform discharges showed the same duration, latency, and all-or-none character as described previously with microelectrodes. Under all conditions examined, threshold electrical stimulation applied throughout the piriform cortex evoked all-or-none epileptiform discharges originating in a site that included the endopiriform nucleus, a previously identified site of discharge onset. In induced slices, but not disinhibited slices, the site of onset also included layer VI of the adjoining agranular insular cortex and perirhinal cortex, in slices from anterior and posterior piriform cortex, respectively. These locations had not been identified previously as sites of discharge onset. Thus like the endopiriform nucleus, the deep agranular insular cortex and perirhinal cortex have a very low seizure threshold. Additional subtle differences were noted between the induced and disinhibited models of epileptogenesis. Velocity was determined for discharges after onset, as they propagated outward to the overlying piriform cortex. Propagation in other directions was examined as well. In most cases, velocities were below that for action potential conduction, suggesting that recurrent excitation and/or ephaptic interactions play a role in discharge propagation. Future investigations of the cellular and organizational properties of regions identified in this study should help clarify the neurobiological basis of high seizure susceptibility.     

Infantile spasms as the initial symptom of biotinidase deficiency

Two patients with biotinidase deficiency had diagnoses of infantile spasms made at 1 month of age. Biotinidase deficiency may be seen early in the neonatal period without the characteristic findings such as alopecia and seborrheic dermatitis. This diagnosis should be considered in patients with infantile spasms.     

Placental villous stroma as a model system for myofibroblast differentiation

Different subtypes of myofibroblasts have been described according to their cytoskeletal protein patterns. It is quite likely that these different subtypes represent distinct steps of differentiation. We propose the human placental stem villi as a particularly suitable model to study this differentiation process. During the course of pregnancy, different types of placental villi develop by differentiation of the mesenchymal stroma surrounding the fetal blood vessels. In order to characterise the differentiation of placental stromal cells in the human placenta, the expression patterns of the cytoskeletal proteins vimentin, desmin, alpha- and gamma-smooth muscle actin, pan-actin, smooth muscle myosin, and the monoclonal antibody GB 42, a marker of myofibroblasts, were investigated on placental tissue of different gestational age (7th-40th week of gestation). Proliferation patterns were assessed with the proliferation markers MIB 1 and PCNA. Additionally, dipeptidyl peptidase IV distribution was studied in term placenta and the ultrastructure of placental stromal cells was assessed by electron microscopy. Different subpopulations of extravascular stromal cells were distinguished according to typical co-expression patterns of cytoskeletal proteins. Around the fetal stem vessels in term placental villi they were arranged as concentric layers with increasing stage of differentiation. A variable layer of extravascular stromal cells lying beneath the trophoblast expressed vimentin (V) or vimentin and desmin (VD). They were mitotically active. The next layer co-expressed vimentin, desmin, and alpha-smooth muscle actin (VDA). More centrally towards the fetal vessels, extravascular stromal cells co-expressed vimentin, desmin, alpha- and gamma-smooth muscle actin, and GB 42 (VDAG). Cells close to the fetal vessels additionally co-expressed smooth muscle myosin (VDAGM). Ultrastructurally, V cells resembled typical mesenchymal cells. VD cells corresponded to fibroblasts, while VDA and VDAG cells developed features of myofibroblasts. Cells of the VDAGM-type revealed a smooth muscle cell-related ultrastructure. In earlier stages of pregnancy, stromal cell types with less complex expression patterns prevailed. The media smooth muscle cells of the fetal vessels showed a mixture of different co-expression patterns. These cells were separated from extravascular stromal cells by a layer of collagen fibres. The results obtained indicate a clearly defined spatial differentiation gradient with increasing cytoskeletal complexity in human placental stromal cells from the superficial trophoblast towards the blood vessels in the centre of the stem villi. The spatial distribution of the various stages of differentiation suggests that human placental villi could be a useful model for the study of the differentiation of myofibroblasts.     

Immunohistochemistry of matrix metalloproteinases (MMP), their substrates, and their inhibitors (TIMP) during trophoblast invasion in the human placenta

The invasion of extravillous trophoblast cells into the maternal endometrium is one of the key events in human placentation. The ability of these cells to infiltrate the uterine wall and to anchor the placenta to it as well as their ability to infiltrate and to adjust utero-placental vessels to pregnancy depends, among other things, on their ability to secrete enzymes that degrade the extracellular matrix. Most of the latter enzymes belong to the family of matrix metalloproteinases. Their activity is regulated by the tissue inhibitors of matrix metalloproteinases. We have studied the distribution patterns of matrix metalloproteinases-1, -2, -3, and -9 and their inhibitors TIMP-1 and TIMP-2 as compared to the distribution of their substrates along the invasive pathway of extravillous trophoblast of 1st, 2nd, and 3rd trimester placentas by means of light microscopy on paraffin and cryostat sections as well as at the ultrastructural level (only 3rd trimester placenta). The comparison of different methods proved to be necessary, since the immunohistochemical distribution patterns of these soluble enzymes are considerably influenced by the pretreatment of tissues. All three methods revealed immunoreactivities of both, proteinases and their inhibitors, not only intracellularly in the extravillous trophoblast but also extracellularly in its surrounding matrix, the distribution patterns depending on the stage of pregnancy and on the degree of differentiation of trophoblast cells along their invasive pathway. Within the extracellular matrix, immunolocalization of matrix metalloproteinases as well as their inhibitors showed a specific relation to certain extracellular matrix molecules.     

Reduction of Chromite in Liquid Fe-Cr-C-Si Alloys

The kinetics and the mechanism of the reduction of chromite in Fe-Cr-C-Si alloys were studied in the temperature range of 1534 °C to 1702 °C under an inert argon atmosphere. The rotating cylinder technique was used. The melt consisted of 10 and 20 wt Pct chromium, the carbon content varied from 2.8 wt Pct to saturation, and the silicon content varied from 0 to 2 wt Pct. The rotational speed of the chromite cylinder ranged from 100 to 1000 rpm. The initial chromium to iron ratios of the melts varied between 0.11 and 0.26. In Fe-C melts, the effect of rotational speed on the reduction of chromite was very limited. Carbon saturation (5.4 wt Pct) of the alloy caused the reduction to increase 1.5 times over the reduction observed in the unsaturated (4.87 wt Pct) alloy at a given rotational speed. The addition of chromium to the carbon-saturated Fe-C alloy increased the reduction rate. The addition of silicon to the liquid phase increased the reduction rate drastically. The reduction of chromite in Fe-Cr-C melts is hindered because of the formation of, approximately, a 1.5-mm-thick M₇C₃-type carbide layer around the chromite cylinders. This carbide layer did not form when silicon was present in the melt. It was found that the reduction rate is controlled by the liquid-state mass transfer of oxygen. The calculated apparent activation energies for diffusion were 102.9 and 92.9 kJ/mol of oxygen in the Si-O and C-O systems, respectively.     

Laser cutting of 7050 Al alloy reinforced with Al2O3 and B4C composites

In the present study, laser cutting of 7050 aluminum alloy sheets reinforced with Al₂O₃ and B₄C particles are carried out. The cut geometry is examined using scanning electron microscope and the optical microscope. The lump parameter analysis technique is used to formulate and determine the kerf width size. The predictions for kerf width are compared with experimental data. The percentage kerf width size variation along the cut edges is determined and the influence of the laser power level and duty cycle of the laser pulses on the percentage kerf width size variation is examined. It is found that 7050 aluminum alloy reinforced with 20% Al₂O₃ composite results in relatively large kerf width size as compared to its counter parts that corresponding to 7050 aluminum alloy reinforced with 20% B₄C composite. The kerf width size predicted agreed with the experimental data for both composites.     

A Monolithic Phased Array Using 3-bit Distributed RF MEMS Phase Shifters

This paper presents a novel electronically scanning phased-array antenna with 128 switches monolithically implemented using RF microelectromechanical systems (MEMS) technology. The structure, which is designed at 15 GHz, consists of four linearly placed microstrip patch antennas, 3-bit distributed RF MEMS low-loss phase shifters, and a corporate feed network. MEMS switches and high-Q metal-air-metal capacitors are employed as loading elements in the phase shifter. The system is fabricated monolithically using an in-house surface micromachining process on a glass substrate and occupies an area of 6 cm times 5 cm. The measurement results show that the phase shifter can provide nearly 20deg/50deg/95deg phase shifts and their combinations at the expense of 1.5-dB average insertion loss at 15 GHz for eight combinations. It is also shown by measurements that the main beam can be steered to required directions by suitable settings of the RF MEMS phase shifters.     

Polarization Properties of Photoluminescence of Anisotropic Polymer Films Containing Aligned Au Nanorods and Semiconductor Nanoparticles of Various Shape

Semiconductors - Anisotropic polymer films containing aligned Au nanorods and semiconductor nanoparticles of various shape were fabricated. The photoluminescence of semiconductor nanoparticles in...