Redistribution of phosphorus implanted into silicon doped heavily with boron

The special features of redistribution of phosphorus implanted into silicon wafers with a high concentration of boron (N _B=2.5×10²⁰ cm^?3) were studied. It is shown that, in silicon initially doped heavily with boron, the broadening of concentration profiles of phosphorus as a result of postimplantation annealing for 1 h in the temperature range of 900–1150°C is significantly less than in the case of lightly doped silicon. The results are interpreted in terms of the impurity-impurity interaction with the formation of stationary boron-phosphorus pairs. The binding energy of boron-phosphorus complexes in silicon was estimated at 0.6–0.8 eV.     

Purification and characterization of an alkaline pectin lyase produced by a newly isolated Brevibacillus borstelensis (P35) and its applications in fruit juice and oil extraction

An alkaline pectin lyase (PNL) (EC 4.2.2.10) secreted by Brevibacillus borstelensis P35 (GenBank Number: FJ417406) was purified using ammonium sulfate fractionation, anion exchange chromatography on DEAE-cellulose and gel filtration chromatography on Sephadex G-150. The pH and temperature optima of the enzyme were found to be 8.0 and 60 °C. The enzyme does not loose activity up to 60 °C if exposed for 1 h. The values of K _m and V _max of the enzyme were 0.625 mg/mL and 126.32 s^?1, respectively. The molecular weight was found to be 36 ± 01 kDa. The presence of 10 mM concentration of Ca²⁺, Cu²⁺, Mn²⁺, Mg²⁺, Zn²⁺, Hg²⁺, Fe²⁺ and EDTA, l-cystein, ascorbic acid significantly enhanced the PNL of the purified enzyme. In the course of the laboratory trials, it was demonstrated that PNL from B. borstelensis (P35) could be successfully applied to the production and clarification of fruit juice and oil extraction.     

Production of carotenoids by Rhodotorula glutinis MT-5 in submerged fermentation using the extract from waste loquat kernels as substrate

BACKGROUND: The aim of present study was to investigate the feasibility of the hydrolysate extracts from waste loquat kernels as substrate in submerged culture of yeast Rhodotorula glutinis MT‐5 for carotenoid production. RESULTS: Loquat kernel was found to have high protein (22.5%) and total carbohydrate (71.2%) contents. Dried and powdered loquat kernels were subjected to acid hydrolysis with 2 mol L^?1 HCl. The hydrolysate obtained was used for the preparation of loquat kernel extract and detoxified loquat kernel extract. The detoxification of hydrolysate was performed with Ca(OH)₂. Among the 10 R. glutinis isolates, the MT‐5 was found to be best in order to produce carotenoid using the extract as substrate. Production media prepared with detoxified loquat kernel extract or loquat kernel extract gave maximum biomass concentrations of 12.64 and 11.37 g L^?1, and maximum carotenoid concentrations of 72.36 and 62.73 mg L^?1, respectively. CONCLUSION: This study has provided effective processes for the conversion of waste material of plant origin to the extracts which are very rich in term of total fermentable sugar. The practicability of the extracts as fermentation substrate was proven in carotenoid production. To the best of our knowledge, this is the first report on use of this waste material as a substrate in yeast fermentations. Copyright © 2011 Society of Chemical Industry     

Evolution and implementations of the RAP database machine

The article presents the evolution of the RAP. 1, RAP. 2, and RAP. 3 database architectures and discusses various implementations carried out to date. The RAP database machine has evolved from a fixed head disk based SIMD architecture into one that is an MIMD architecture and optimized around solid state bulk memories. With the dynamic and order preserving data space partitioning strategy, binary relational algebra and projection operation complexity has been reduced to a linear order. Its tagging based universal language has enabled various system implementations such as multimodel support, integrated text retrieval capabilities, and security and integrity control.     

Interaction of synthetic polyampholytes with anionic and cationic detergents in aqueous solution

Summary The interaction of amphoteric macromolecules with ionic surfactants is accompanied by a strong decrease of the dimensions of the polyelectrolyte chains, but the complex particles are retained from precipitation by the presence of the hydrophylic components of the polyampholyte. The behaviour of the complex polyampholyte-detergent depends both on the nature of amphoteric copolymers and on the ionic detergents.     

Predicting performance of a ground-source heat pump system using fuzzy weighted pre-processing-based ANFIS

The goal of this work is to predict the daily performance (COP) of a ground-source heat pump (GSHP) system with the minimum data set based on an adaptive neuro-fuzzy inference system (ANFIS) with a fuzzy weighted pre-processing (FWP) method. To evaluate the effectiveness of our proposal (FWP–ANFIS), a computer simulation is developed on MATLAB environment. The comparison of the proposed hybridized system's results with the standard ANFIS results is carried out and the results are given in the tables. The efficiency of the proposed method was demonstrated by using the 3-fold cross-validation test. The statistical methods, such as the root-mean squared (RMS), the coefficient of multiple determinations (R²) and the coefficient of variation (cov), are given to compare the predicted and actual values for model validation. The average R² values is 0.9998, the average RMS value is 0.0272 and the average cov value is 0.7733, which can be considered as very promising. The data set for the COP of GSHP system available included 38 data patterns. The simulation results show that the FWP-based ANFIS can be used in an alternative way in these systems. The prediction results of the proposed structure were much better than the standard ANFIS results. Therefore, instead of limited experimental data found in the literature, faster and simpler solutions are obtained using hybridized structures such as FWP-based ANFIS.     

Evaluation of some of the physical properties of atmospheric plasma treated polypropylene fabric

In this study, atmospheric pressure plasma (APP) treatment was applied to polypropylene (PP) fabric with non‐polymerizing gases, such as air, argon, and nitrogen. Properties of the APP‐treated samples including low‐stress mechanical behavior, air permeability, water vapor permeability, and thermal characteristics were evaluated. Tensile and friction coefficient of the specimens were also measured. The changes in these properties are believed to be closely related to the inter‐fiber and inter‐yarn frictional force induced by the APP. The decrease in the air permeability of the APP‐treated PP fabric was probably because of the plasma action effect on change in fabric surface morphology, which was confirmed by scanning electron microscopy micrographs. The change in the thermal properties of the APP‐treated PP fabric was in good agreement with the earlier findings and can be attributed to the amount of air trapped between the yarns and fibers. This study suggests that the APP treatment can influence the final properties of the PP fabric, and also provides information for developing APP‐treated PP fabric for industrial use.     

Valorisation of almond shell waste in ultrasonic biomordanted dyeing: alternatives to metallic mordants

An agroindustrial waste, outer green shell of almond fruit has been valorised as a novel natural dye using chemical solvent-free extraction, small amount of metallic mordants, one-bath biomordanted dyeing, ultrasonic medium, auxiliary-free dyeing and washing. The main objective of this study is to evaluate biomordants vs. metallic mordants depending on heating system both in extraction and dyeing and to reveal alternatives to metallic mordants. Effects of conventional- and ultrasound-assisted systems on dyeing and fastness properties were investigated. Wool fabrics dyed using metallic mordants (alum, iron II sulphate, copper II sulphate and potassium dichromate) were compared with the samples dyed in conjunction with biomordants [powder of valex (acorn of Quercus ithaburensis ssp. macrolepis), pomegranate (Punica granatum L.) rind, rosemary (Rosmarinus officinalis) and thuja (Thuja orientalis) leaves] in terms of colour yield, colour coordinates and fastness properties. Heating system had significant effects on dyeing and fastness results. Power ultrasound did not present any advantage in colour yield increment while it presented different effects on fastness values depending on mordant and process type of which ultrasound was applied. Some biomordants could be replaced with metallic mordants depending on their types and heating system. They could produce completely different colour gamuts just like metallic mordants.     

An efficient,heterogeneous, reusable atom transfer radical polymerization catalyst

Melamine based porous polymer (MPP) was prepared as a template solid to incorporate Cu(I) cations into the framework through chelating with nitrogen groups of the melamine. The copper integrated porous material (Cu(I)@MPP) was used as a heterogeneous catalyst and displayed high activity in copper catalyzed atom transfer radical polymerization of methyl methacrylate. The characterization of the Cu(I)@MPP was performed using nitrogen adsorption experiments and wide‐angle X‐ray and Fourier transform infrared spectroscopies. The atomic absorption spectroscopy measurements confirmed that the catalyst is practically non‐leaching and Cu(I) was found to be below 20 ppb after each atom transfer radical polymerization. Moreover, the catalyst showed reusability without any significant change in its activity. © 2017 Society of Chemical Industry