Effect of conductive layer on the performance of gel electrolyte-based supercapacitors

Solid-state electrolytes such a further novel finding is going to have great importance because of the disadvantages of liquid electrolytes such as electrochemical instability, low ion selectivity, and interface contact. It is anticipated that the use of solid-state electrolytes including supercapacitors (SCs) will become widespread with decreasing self-leakage and environmental damage more than liquid electrolytes. In this study, SCs with graphene/PEDOT: PSS coated electrodes and binary PVA gel electrolytes with a conductive layer were designed and the electrochemical performance of the configurations was characterized. The effects of the conductive layer between binary electrolytes and the concentration of the KOH solution in the electrolytes were studied. It was observed that the conductive layer used between the gel electrolytes causes additional charging at the electrolyte/conductive layer interface and behaves like a serially connected capacitor to the double-layer capacitor. Interestingly, at a slow sweep rate (5 mV/s), the specific capacitance values of the assembled SCs decreased when a conductive layer was used but it increased when the sweep rate was fast (100 mV/s).     

Fabrication of Si3N4 preforms from Si3N4 produced via CRN technique

Ceramic preforms with randomly distributed particles as reticulated porous structure which are generally used for metal infiltration as reinforcement, membranes, catalyst supports etc. Preforms are characterized by open porosity making possible their infiltration by liquid metal alloys. In this work, quartz powders using carbon black as a reducing agent were used for alpha Si₃N₄ powders synthesis through a carbothermal reduction and nitridation (CRN) process. The CRN process was carried out under nitrogen flow at 1,450 °C for 4 h. At high temperatures, carbon as reducing agent reacts with the oxygen of SiO₂, and the resulting metallic silicon compounds with nitrogen gas to obtain silicon nitride powder. The reacted powders were used to obtain reticulated ceramic by replica method. The powders containing various bentonite ratios were mixed in water to prepare slurry. The slurry was infiltrated into a polyurethane sponge. A high porous ceramic foam (preform) structure was achieved after burn out of the sponge. All ceramic preforms were sintered to increase stiffness (in the temperature range 900–1,350 °C). The sintered ceramic foams were subjected to compressive tests. The scanning electron microscopy was used to examine the reticulated ceramic foam structure, and X-ray diffraction analysis was performed to determine phases.     

Cellulose templating method for the preparation of La0.8Sr0.2Ga0.83Mg0.17O2.815 (LSGM) solid oxide electrolyte

La_0.8Sr_0.2Ga_0.83Mg_0.17O_2.815 (LSGM) materials are synthesized with a fast and facile cellulose templating method for the first time and characterized by XRD, EIS, Archimedes method and SEM–EDS. LSGM powders with a phase purity of 91.7 mol% are obtained after the calcination at 1300 °C for 12 h. SEM–EDS results indicate possible decomposition and reconstruction of the LSGM phase due to the diffusion of Sr-rich species to the grain boundaries for the sample sintered at 1500 °C for 6 h. Maximum conductivity value is found to be 4.2 × 10^?2 S cm^?1 at 800 °C for the sample calcined at 1300 °C for 12 h and sintered at 1400 °C for 6 h. Phase purity, stability and relative density are the important factors for obtaining high performance LSGM electrolytes. Therefore, cellulose templating method is a promising candidate for the preparation of LSGM electrolytes.     

Improvement of enzymatic xylooligosaccharides production by the co-utilization of xylans from different origins

This study aimed to improve XOs production by enzymatic hydrolysis of xylans from various lignocellulosic waste biomasses namely corn cob, cotton and sunflower stalks, rice hull, wheat straw by using two commercial xylanase preparations, Shearzyme 500L and Veron 191. Shearzyme 500L showed better xylan hydrolysis capacity with high amount of xylose liberation. Xylobiose was the main hydrolysis product in each case. Even though the enzymatic hydrolyses using Shearzyme 500L resulted higher reducing sugar production compared to those of Veron 191, the hydrolysis of complex xylan structures was improved and the production of undesirable xylose was lowered by the co-utilization of xylanase preparations. By the co-utilization of xylanase preparations, the reducing sugar production from wheat straw, corn cob and sunflower stalk originated xylans was increased by 36%, 33% and 13%, respectively, compared to the expected reducing sugar yields. The highest reducing sugar production was obtained from complex corn cob xylan. The depolymerization of cotton and sunflower stalk xylan was poorest even though they have simple structures. Poor utilization of these xylans might be related to their high residual lignin content which might hinder the accessibility of xylan by the xylanases. However, the utilization of sunflower and cotton stalk xylan was improved when they were hydrolyzed within a xylan mixture containing equal amounts of each of five different xylans. In short, XOs production efficiency from agricultural waste materials was improved by the co-utilization of suitable xylanase and/or xylan mixtures considering the heterogeneous structures of xylan and different substrate specificities of xylanases.     

The ratio of crystallinity and thermodynamical interactions of polycaprolactone with some aliphatic esters and aromatic solvents by inverse gas chromatography

Summary The retention diagrams of benzene, toluene, ethyl benzene, chloro benzene, n-propyl benzene, isopropyl benzene, methyl acetate, ethyl acetate, n-propyl acetate, n-butyl acetate and isoamyl acetate on the polycaprolactone were plotted at temperatures between 70 and 140^oC by inverse gas chromatography technique. Percent crystallinity of polycaprolactone were obtained at temperatures below melting point from the retention diagrams of benzene, toluene and ethyl benzene. It was concluded that the data obtained by inverse gas chromatography were comparable those of obtained by differential scanning calorimetry. Specific retention volume, V_g^o, Flory-Huggins polymer-solvent interaction parameters, ₁₂, the weight fraction activity coefficients of the solvents at infinite dilution, ₁, effective exchange energy parameters, X_eff were determined. Later, the partial molar heat of sorption, H_1,sorp and the partial molar heat of mixing, H₁ were obtained from the slope of the logarithm of specific retention volume, Ln V_g^o versus 1/T plot and from the slope of the logarithm of the weight fraction activity coefficients, ₁versus 1/T plot, respectively.     

Preparation and characterization of comb type polymer coated poly(HEMA/EGDMA) microspheres containing surface-anchored sulfonic acid: Application in γ-globulin separation

Poly(2-hydroxyethyl methacrylate/ethylenglycol dimethacrylate), poly(HEMA/EGDMA) microspheres was prepared via suspension polymerization. After activation of the hydroxyl groups of poly(HEMA/EGDMA) by bromination, surface-initiated atom transfer radical polymerization (ATRP) of glycidylmethacrylate was conducted in dioxane/bipyridine mixture with CuBr as catalyst at 65 °C. The epoxy groups of the poly(glycidylmethacrylate) comb polymer were converted into sulfonic acid groups (as proton-exchange groups) with reaction of sodium sulfite. Synthesized microspheres were characterized by swelling studies, FT-IR spectroscopy, scanning electron microscopy (SEM) and elemental analysis. The microspheres were used as ion-exchange support for adsorption and purification of human γ-globulin (IgG). The maximum γ-globulin adsorption on the ion-exchange adsorbents was observed at between pH 5.0 and 6.0. The IgG adsorption onto the poly(HEMA/EGDMA) microspheres was negligible. The maximum amount of adsorbed γ-globulin was found to be 230.1 mg/g microspheres. The ion-exchange adsorbents allowed one-step separation of IgG from human plasma. The γ-globulin molecules could be repeatedly adsorbed and desorbed with this ion-exchange support without noticeable loss in their IgG adsorption capacity.     

Removal of heavy‐metal ions by magnetic beads containing triazole chelating groups

The aim of this study was to prepare magnetic beads that could be used for the removal of heavy‐metal ions from synthetic solutions. Magnetic poly(ethylene glycol dimethacrylate–1‐vinyl‐1,2,4‐triazole) [m‐poly(EGDMA–VTAZ)] beads were produced by suspension polymerization in the presence of a magnetite Fe₃O₄ nanopowder. The specific surface area of the m‐poly(EGDMA–VTAZ) beads was 74.8 m²/g with a diameter range of 150–200 μm, and the swelling ratio was 84%. The average Fe₃O₄ content of the resulting m‐poly(EGDMA–VTAZ) beads was 14.8%. The maximum binding capacities of the m‐poly(EGDMA–VTAZ) beads from aquous solution were 284.3 mg/g for Hg²⁺, 193.8 mg/g for Pb²⁺, 151.5 mg/g for Cu²⁺, 128.1 mg/g for Cd²⁺, and 99.4 mg/g for Zn²⁺. The affinity order on a mass basis was Hg²⁺ > Pb²⁺ > Cu²⁺ > Cd²⁺> Zn²⁺. The binding capacities from synthetic waste water were 178.1 mg/g for Hg²⁺, 132.4 mg/g for Pb²⁺, 83.5 mg/g for Cu²⁺, 54.1 mg/g for Cd²⁺, and 32.4 mg/g for Zn²⁺. The magnetic beads could be regenerated (up to ca. 97%) by a treatment with 0.1M HNO₃. These features make m‐poly(EGDMA–VTAZ) beads potential supports for heavy‐metal removal under a magnetic field. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Evaluation of the bond strength of different bonding agents to porcelain and metal alloy

This study was carried out with the purpose of testing the bond strength of different bonding agents bonded to different substrates.Substrates consisted of cylindrical specimens of three different materials: porcelain, metal, and a porcelain–metal combination. Specimens were all 10 mm in diameter and 4 mm thick. Surfaces to be bonded were air-abraded with Al₂O₃ and cleaned ultrasonically in distilled water for 10 min. After the preparation of the surface was complete, three different bonding agents were applied to the central region of the substrates. Composite resin of a 3.5 mm diameter and 2 mm thick was applied. All specimens were thermocycled between 5 and 55 °C for 200 cycles with a 30-s dwell time. After thermocycling, specimens were stored at 37 °C in distilled water for an additional 7 days before being subjected to a shear load. Shear testing was conducted Hounsfield test machine.The univariate analysis of variance and the Duncan multiple comparison test were used for statistical assessment. It was found that both type of bonding agents and of substrate led to statistically significant differences in bond strength (p<0.01).It was found that the highest bond strength was produced by Clearfil and on pure alloy substrate (33.36 MPa) and the lowest bond strength in Single Bond and porcelain–alloy substrate (4.25 MPa).