Oxidative Stability of Chia (Salvia hispanica L.) and Sesame (Sesamum indicum L.) Oil Blends

Chia and sesame oils are important sources of essential fatty acids; however, their ω-3:ω-6 proportions do not comply with nutritional recommendation. A feasible approach to improve the ratio is to blend different oils, but only after understanding physical and chemical changes of the new matrix. Objective of the investigation was to determine the physico-chemical characteristics and the oxidative stability index (OSI), using the Rancimat method, of chia-sesame oil blends. The four ω-3:ω-6 blends tested (1:4, 1:6, 1:8, and 1:10) were exposed to temperatures of 110, 120, and 130 °C. The OSI values of the mixtures varied between 6.24–8.08, 3.07–4.00, and 1.62–2.01 hours for each temperature, respectively. In addition, their mean activation energy, enthalpy, entropy, and Q₁₀ were 88.4 kJ/mol, 85.2 kJ/mol, −41.1 J/mol K, and 2.0. Finally, a shelf life prediction performed at 25 °C indicated stability times between 80 and 123 days. Therefore, combining chia and sesame oils produced blends with a good balance of essential fatty acids.     

A Toxoplasma gondii Oxopurine Transporter Binds Nucleobases and Nucleosides Using Different Binding Modes

Toxoplasma gondii is unable to synthesize purines de novo, instead salvages them from its environment, inside the host cell, for which they need high affinity carriers. Here, we report the expression of a T. gondii Equilibrative Nucleoside Transporter, Tg244440, in a Trypanosoma brucei strain from which nucleobase transporters have been deleted. Tg244440 transported hypoxanthine and guanine with similar affinity (K_m ~1 µM), while inosine and guanosine displayed K_i values of 4.05 and 3.30 µM, respectively. Low affinity was observed for adenosine, adenine, and pyrimidines, classifying Tg244440 as a high affinity oxopurine transporter. Purine analogues were used to probe the substrate-transporter binding interactions, culminating in quantitative models showing different binding modes for oxopurine bases, oxopurine nucleosides, and adenosine. Hypoxanthine and guanine interacted through protonated N1 and N9, and through unprotonated N3 and N7 of the purine ring, whereas inosine and guanosine mostly employed the ribose hydroxy groups for binding, in addition to N1H of the nucleobase. Conversely, the ribose moiety of adenosine barely made any contribution to binding. Tg244440 is the first gene identified to encode a high affinity oxopurine transporter in T. gondii and, to the best of our knowledge, the first purine transporter to employ different binding modes for nucleosides and nucleobases.     

Prevalence, distribution, and diversity of Listeria monocytogenes in retail environments, focusing on small establishments and establishments with a history of failed inspections

Despite growing concerns about cross-contamination of ready-to-eat foods with Listeria monocytogenes, our knowledge about the ecology and transmission of L. monocytogenes in retail establishments has remained limited. We conducted a cross-sectional study to characterize the prevalence, distribution, and subtype diversity of L. monocytogenes in 120 New York State retail deli establishments that were hypothesized to present an increased risk for environmental L. monocytogenes contamination (i.e., small establishments and establishments with a history of failed New York State Agriculture and Markets inspections). Analysis of these data along with previously reported data for 121 predominantly larger retail establishments in New York State identified establishment size, geographic location, and inspection history as significant predictors of L. monocytogenes presence and prevalence. The odds of an establishment being L. monocytogenes positive were approximately twice as high for large establishments, establishments located in New York City, or establishments with poor inspection history (as compared with establishments without these attributes), even though correlation between location and inspection history complicated interpretation of results. Within an establishment, L. monocytogenes was significantly more prevalent on nonfood contact surfaces than on food contact surfaces; prevalence was particularly high for floors and in floor drains, sinks, the dairy case, and milk crates. L. monocytogenes subtype diversity differed between sites, with lineage I isolates significantly associated with nonfood contact surfaces and lineage II isolates significantly associated with food contact surfaces. Isolates belonging to the same ribotype were often found dispersed across multiple sites within an operation.     

Improving the functional properties of soy glycinin by enzymatic treatment. Adsorption and foaming characteristics

In this contribution we have determined the effect of limited enzymatic hydrolysis on the interfacial (dynamics of adsorption and surface dilatational properties) and foaming (foam formation and stabilization) characteristics of a soy globulin (glycinin, fraction 11S). The degree of hydrolysis (DH=0%, 2%, and 6%), the pH of the aqueous solution (pH=5 and 7), and the protein concentration in solution (at 0.1, 0.5 and 1 wt%) were the variables studied. The temperature and the ionic strength were maintained constant at 20 °C and 0.05 M, respectively. The rate of adsorption and surface dilatational properties (surface dilatational modulus, E, and loss angle) of glycinin at the air–water interface depend on the pH and DH. The adsorption decreased drastically at pH 5.0, close to the isoelectric point of glycinin, because of the existence of a lag period and a low rate of diffusion. The interfacial characteristics of glycinin are much improved by enzymatic treatment, especially in the case of acidic aqueous solutions. Hydrolysates with a low DH have improved functional properties (mainly foaming capacity and foam stability), especially at pH close to the isoelectric point (pI), because the native protein is more difficult to convert into a film at fluid interfaces at pH≈pI. The foam capacity depends on the rate of diffusion of protein to the interface and is much improved by the enzymatic treatment. Foam stability correlates with surface pressure and, to a minor extent, with surface dilatational modulus at long-term adsorption with few exceptions.     

Laser‐induced surface structures on gold‐coated polymers: Influence of morphology on surface‐enhanced Raman scattering enhancement

The fabrication of highly sensitive and reproducible substrates for Surface‐Enhanced Raman Scattering (SERS) remains a challenging scientific and technological issue. In this work, laser‐induced periodic surface structures are generated on poly(trimethylen terephthalate) films upon laser irradiation with the linearly polarized beams of a Nd:YAG laser (4th harmonic, 266 nm), an ArF excimer laser (193 nm), and a Titanium:sapphire laser (795 nm), resulting in periods close to the laser wavelength when irradiating at normal incidence, and larger periods for different angles of incidence. Additional irradiation with a circularly polarized beam at 266 nm produces superficial circular structures. The nanostructured polymers are coated with a nanoparticle assembled gold layer by pulsed laser deposition at 213 nm. The capabilities of these substrates for SERS are evaluated using benzenethiol as a test molecule and different degrees of Raman signal enhancement are observed depending on the nanostructure type. The highest enhancement factor is obtained by for nanostructured substrates with the highest values of period, depth, and roughness. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42770.     

Rosuvastatin Enhances the Catabolism of LDL apoB‐100 in Subjects with Combined Hyperlipidemia in a Dose Dependent Manner

Dose‐associated effects of rosuvastatin on the metabolism of apolipoprotein (apo) B‐100 in triacylglycerol rich lipoprotein (TRL, d < 1.019 g/ml) and low density lipoprotein (LDL) and of apoA‐I in high density lipoprotein (HDL) were assessed in subjects with combined hyperlipidemia. Our primary hypothesis was that maximal dose rosuvastatin would decrease the apoB‐100 production rate (PR), as well as increase apoB‐100 fractional catabolic rate (FCR). Eight subjects received placebo, rosuvastatin 5 mg/day, and rosuvastatin 40 mg/day for 8 weeks each in sequential order. The kinetics of apoB‐100 in TRL and LDL and apoA‐I in HDL were determined at the end of each phase using stable isotope methodology, gas chromatography‐mass spectrometry, and multicompartmental modeling. Rosuvastatin at 5 and 40 mg/day decreased LDL cholesterol by 44 and 54 % (both P < 0.0001), triacylglycerol by 14 % (ns) and 35 % (P < 0.01), apoB by 30 and 36 % (both P < 0.0001), respectively, and had no significant effects on HDL cholesterol or apoA‐I levels. Significant decreases in plasma markers of cholesterol synthesis and increases in cholesterol absorption markers were observed. Rosuvastatin 5 and 40 mg/day increased TRL apoB‐100 FCR by 36 and 46 % (both ns) and LDL apoB‐100 by 63 and 102 % (both P < 0.05), respectively. HDL apoA‐I PR increased with low dose rosuvastatin (12 %, P < 0.05) but not with maximal dose rosuvastatin. Neither rosuvastatin dose altered apoB‐100 PR or HDL apoA‐I FCR. Our data indicate that maximal dose rosuvastatin treatment in subjects with combined hyperlipidemia resulted in significant increases in the catabolism of LDL apoB‐100, with no significant effects on apoB‐100 production or HDL apoA‐I kinetics.     

Bayesian Model Uncertainty In Smooth Transition Autoregressions

Abstract. In this paper, we propose a fully Bayesian approach to the special class of nonlinear time‐series models called the logistic smooth transition autoregressive (LSTAR) model. Initially, a Gibbs sampler is proposed for the LSTAR where the lag length, k, is kept fixed. Then, uncertainty about k is taken into account and a novel reversible jump Markov Chain Monte Carlo (RJMCMC) algorithm is proposed. We compared our RJMCMC algorithm with well‐known information criteria, such as the Akaikes? information criteria, the Bayesian information criteria (BIC) and the deviance information criteria. Our methodology is extensively studied against simulated and real‐time series.     

Assessment of a Cylindrical and a Rectangular Plate Differential Mobility Analyzer for Size Fractionation of Nanoparticles at High-Aerosol Flow Rates

An existing differential mobility analyzer (DMA) of cylindrical electrodes and a novel DMA of rectangular plate electrodes are demonstrated for size fractionation of nanoparticles at high-aerosol flow rates in this work. The two DMAs are capable of delivering monodisperse size selected nanoparticles (SMPS σ_g < 1.1) at gas flow rates ranging from 200 slm to 500 slm. At an aerosol flow rate of 200 slm, the maximum attainable particle mean size is of about 20 nm for the cylindrical DMA and of nearly 50 nm for the rectangular plate DMA. The number concentration of the monodisperse nanoparticles delivered by the high-flow DMAs spans from 10⁴ cm^?3 to 10⁶ cm^?3 depending upon the particle mean size and particle size dispersion.

Copyright 2014 American Association for Aerosol Research     

Estimation of soil water repellency of different particle size fractions in relation with carbon content by different methods

The water repellency of soils with different texture under different types of plant cover was determined by applying the WDPT and MED methods to both whole samples and the following size fractions: 2-1, 1-0.5, 0.5-0.25, 0.25-0.05 and <0.05 mm. Based on the results, the soils under maize crop and grassland, which were mostly wettable in the whole samples, exhibited water repellency in the finest fraction (<0.05 mm) as a result of its higher organic carbon content. On the other hand, all fractions in the forest soils, which were extremely water repellent, contributed to the overall repellency; in any case, the MED test revealed that the finest fraction was strongly repellent in the forest soils as well.