Quantitative Prediction of Steatosis in Patients with Non-Alcoholic Fatty Liver by Means of Hepatic MicroRNAs Present in Serum and Correlating with Hepatic Fat

Non-alcoholic fatty liver disease (NAFLD) is the most prevalent form of chronic liver disease worldwide, but a reliable non-invasive method to quantify liver steatosis in primary healthcare is not available. Circulating microRNAs have been proposed as biomarkers of severe/advanced NAFLD (steatohepatitis and fibrosis). However, the use of circulating miRNAs to quantitatively assess the % of liver fat in suspected NAFLD patients has not been investigated. We performed global miRNA sequencing in two sets of samples: human livers from organ donors (n = 20), and human sera from biopsy-proven NAFLD patients (n = 23), both with a wide range of steatosis quantified in their liver biopsies. Partial least squares (PLS) regression combined with recursive feature elimination (RFE) was used to select miRNAs associated with steatosis. Moreover, regression models with only 2 or 3 miRNAs, with high biological relevance, were built. Comprehensive microRNA sequencing of liver and serum samples resulted in two sets of abundantly expressed miRNAs (418 in liver and 351 in serum). Pearson correlation analyses indicated that 18% of miRNAs in liver and 14.5% in serum were significantly associated with the amount of liver fat. PLS-RFE models demonstrated that 50 was the number of miRNAs providing the lowest error in both liver and serum models predicting steatosis. Comparison of the two miRNA subsets showed 19 coincident miRNAs that were ranked according to biological significance (guide/passenger strand, relative abundance in liver and serum, number of predicted lipid metabolism target genes, correlation significance, etc.). Among them, miR-10a-5p, miR-98-5p, miR-19a-3p, miR-30e-5p, miR-32-5p and miR-145-5p showed the highest biological relevance. PLS regression models with serum levels of 2–3 of these miRNAs predicted the % of liver fat with errors <5%.     

Characterization of a deswapped triple mutant bovine odorant binding protein

The stability and functionality of GCC-bOBP, a monomeric triple mutant of bovine odorant binding protein, was investigated, in the presence of denaturant and in acidic pH conditions, by both protein and 1-aminoanthracene ligand fluorescence measurements, and compared to that of both bovine and porcine wild type homologues. Complete reversibility of unfolding was observed, though refolding was characterized by hysteresis. Molecular dynamics simulations, performed to detect possible structural changes of the monomeric scaffold related to the presence of the ligand, pointed out the stability of the β-barrel lipocalin scaffold.     

Ocratoxin A in human plasma and coffee from Costa Rica by ELISA

Costa Rica is not an exception in the prevalence of ochratoxin A in human plasma, in this research the presence of the micotoxin was found in 95% of the 149 samples studied. The presence of ocratoxina A also was studied in 110 samples of toasted and grounded coffee from the most important 12 coffee factories of the country and from 7 supermarkets. With the exception of one negative sample the rest of them have concentrations of micotoxin below 4000 ng/kg. An association between the coffee consumption and the presence of ochratoxin A in plasma was attempted to be found as well as in the consumption of beer, but there were any statistically significant difference in the average level of mycotoxin between the coffee consumers and non coffee consumers neither between beer consumers and no beer consumers.     

Flow Instabilities in Linear and Branched Syndiotactic Poly(propylene)s

Extrusion flow experiments of linear and branched syndiotactic poly(propylene)s were carried out. The work was focused on flow instabilities. Ionized radiation was employed to induce long chain branching in linear samples. Sharkskin and melt fracture were postponed in the case of slightly long branched samples, which possess an enhanced melt elasticity compared to linear samples. For the most elastic samples the nature of the flow instability changed: sharkskin disappeared and melt fracture was observed instead. The correlation between sharkskin and melt strength results is discussed.

     

Synthesis and thermal,mechanical and gas permeation properties of aromatic polyimides containing different linkage groups

Two series of aromatic polyimides containing various linkage groups based on 2,7‐bis(4‐aminophenoxy)naphthalene or 3,3′‐dimethyl‐4,4′‐diaminodiphenylmethane and different aromatic dianhydrides, namely 4,4′‐(4,4′‐isopropylidenediphenoxy)bis(phthalic anhydride), 4,4′‐(hexafluoroisopropylidene)bis(phthalic anhydride), 3,3′,4,4′ benzophenonetetracarboxylic dianhydride, 9,9‐bis[4‐(3,4‐dicarboxyphenoxy)phenyl]fluorene dianhydride and 4,4′‐(4,4′‐hexafluoroisopropylidenediphenoxy)bis(phthalic anhydride), were synthesized and compared with regard to their thermal, mechanical and gas permeation properties. All these polymers showed high thermal stability with initial decomposition temperature in the range 475–525 °C and glass transition temperature between 208 and 286 °C. Also, the polymer films presented good mechanical characteristics with tensile strength in the range 60–91 MPa and storage modulus in the range 1700–2375 MPa. The macromolecular chain packing induced by dianhydride and diamine segments was investigated by examining gas permeation through the polymer films. The relationships between chain mobility and interchain distance and the obtained values for gas permeability are discussed. © 2014 Society of Chemical Industry     

Nafion‐115/aromatic poly(etherimide) with isopropylidene groups/imidazole membranes for polymer fuel cells

Proton exchange membrane fuel cells (PEMFCs) with Pt/C gas diffusion electrodes and graphite single‐serpentine monopolar plates were constructed based on an aromatic poly(etherimide) with isopropylidene groups (PI)/imidazole (Im) and a popular Nafion‐115 matrix. The electrochemical properties of PEMFCs were tested at 25 and 60°C. The maximum power density of 171 mW/cm² and the maximum current density of 484 mA/cm² were detected for Nafion‐115/PI membrane. For both constructed PEMFCs the efficiency at 0.6 V was found about 41%. Immersion of Nafion‐115 in PI or PI/Im increased the thermal stability and mechanical properties of membranes. Thermal, mechanical properties and morphology of membranes were characterized by TGA, and AFM techniques including force spectroscopy. Interactions between the components in composite membranes were established by FT‐IR. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42436.     

Some Polyamides,Polyesters, and Polyurethanes Containing AZO Groups

The paper discusses the synthesis of the N,N,′-azobis(formamidopropionic) acid (AFP), along with some characteristics determined from NMR spectrum, differential thermal analysis, and DSC. The behavior of AFP acid—as well as of its analogue, N,N′-azobis(formamidoacetic) acid (AFA)—has been studied in the reaction with aromatic diamine and with bis(glycol)terephthalate, leading to azopolymers of the azopolyamide, or azopolyester, type. On employing N,N′-bis(β-hydroxyethyl) azobis-formamide (HEAF) as the azo bifunctional compound in the reaction with diphenylmethane diisocyanate, a polyurethane possessing azo groups was obtained. The structure of the azopolymers has been spectroscopically confirmed.     

Ternary Gels of a Polymer Blend and a Recycled Oil: Their Use as Bitumen Modifiers

A blend of random ethylene‐vinyl acetate copolymer (EVA) and triblock styrene‐butadiene‐styrene copolymer (SBS) was dissolved in a recycled engine oil to obtain ternary thermoreversible gels. As the temperature was increased, first a network associated with EVA disappeared, and a second one associated with SBS dominated, maintaining the elastic response of the system. The principal advantage of these ternary systems is that their mechanical properties and thermal stability are better than that of binary gels. These gels, made from waste, can be used as bitumen modifiers to obtain binders of improved properties and good stability, which are useful for road surfacing.

Temperature sweeps of elastic modulus performed at a frequency of 1 Hz.     

In situ impedance study of the Y-Ni thin film under electrochemical hydrogenation

A thin film of yttrium Y (150 nm) protected by a 6 nm coating of nickel Ni on a glass substrate was completely hydrogenated in a 1 M NaOH electrolyte at a constant negative current until the transparent Y tri-hydride phase was achieved and hydrogen gas evolution from the electrode began. A series of impedance measurements were performed in situ during the electrochemical experiment to study the properties of the system as dependent on hydrogenation degree and time of relaxation. The equivalent electrical circuit (EEC) simulations were performed with a Randles-like scheme R₀[R₁CPE₁], where R₀ is the thin film electrode resistance, R₁ the charge transfer resistance and CPE₁ is the capacitive constant phase element. The behavior of all the components of the EEC undergoes a clear transition when the hydrogenation degree of the electrode is approximated to its maximum value (H to Y ratio 2.7) and electrochemical process changes from hydrogen uptake to hydrogen evolution.     

Structure-Activity Relationship Explorations and Discovery of a Potent Antagonist for the Free Fatty Acid Receptor 2

Free fatty acid receptor 2 (FFA2) is a sensor for short-chain fatty acids that has been identified as an interesting potential drug target for treatment of metabolic and inflammatory diseases. Although several ligand series are known for the receptor, there is still a need for improved compounds. One of the most potent and frequently used antagonists is the amide-substituted phenylbutanoic acid known as CATPB ( 1 ). We here report the structure-activity relationship exploration of this compound, leading to the identification of homologues with increased potency. The preferred compound 37 (TUG-1958) was found, besides improved potency, to have high solubility and favorable pharmacokinetic properties.