Effect of carbon nanoparticle reinforcement on mechanical and thermal properties of silicon carbide ceramics

This research presents an analysis of the influence of graphene reinforcement on the thermal and mechanical properties of silicon carbide ceramics, at 2.5% (wt%) graphene content. The SiC composites, containing various carbon nanofillers (graphene oxide and graphene nanoparticles), were sintered by the classical two stage spark plasma sintering method. Two current modes were used, the continuous mode and the pulsed current mode. The results from photothermal radiometry and investigations of the mechanical properties showed that graphene additives significantly improve the thermal properties and toughness of material, sintered from a SiC powder. An 45% growth in the toughness was observed, which increased from 1.21 to 1.75?MPa/m^1/2. The thermal diffusivity value also increased from 0.60 to 0.71?cm²/s and giving an improvement in thermal properties of 18%. The friction coefficient reached 7% giving an increase in value from 0.62 to 0.66. Microscopic investigations supported the photothermal radiometry (PTR) results. Whilst, thermal imaging revealed homogeneity of the local thermal properties of the products fabricated from the starting SiC powder.     

Dynamic mechanical behaviour of random copolymers of a LC-methacrylate and octyl methacrylate

The dynamic mechanical behaviour of random copolymers of LC monomer-1-(hexyloxycarbonyl)ethyl 4-[4-(methacryloyloxy)benzoyloxy]benzoate (HB) and octyl methacrylate (OMA) was studied in the main transition and flow regions. Even though the aliphatic end groups of the side chain of HB and OMA are roughly the same, the T _g temperature of poly(HB) is ∼ 80 K higher than that of poly(OMA); this fact is due to the presence of the stiff phenyl benzoate mesogenic group in the side chain of HB. With increasing content of OMA in the copolymer the superimposed curves of the storage G′ _p and loss G′′ _p moduli at a constant temperature shift towards shorter frequencies. It has been shown that this shift is mainly due to an increase of the free volume in the copolymers with increasing content of OMA. While HB monomer shows liquid crystalline (LC) properties, its polymer (poly(HB)) and random copolymers with OMA show only isotropic thermal behaviour because no flexible spacer is present in the side chain of HB which would decouple the main chain and mesogenic group motions. This means that neither the homopolymer of HB, nor its copolymers with a flexible comonomer retain the LC properties of the starting LC monomer, HB. Received: 26 September 1996/Revised: 7 November 1996/Accepted: 7 November 1996     

Corrosion of YBCO bulk superconductor in air

A corrosion process caused by reaction of surfaces of oxygenation cracks of YBCO bulk single‐grain superconductor with air moisture was studied. X‐ray photo‐emission spectroscopy, done on air exposed (001) surfaces, confirmed oxygen bonds related to barium hydroxide. Thermal analyses and mass spectrometry of exposed samples has shown a release of water caused by decomposition of barium hydroxide hydrates during sample heating. The sample weight increase versus time was related to formation of barium hydroxide phases at the surfaces of oxygenation cracks. The morphological changes of these phases at heating were observed with scanning electron microscope.     

Optimization-based cosmetic formulation: Integration of mechanistic model,surrogate model,and heuristics

Multiple functional and hard-to-quantify sensorial product attributes that can be satisfied by a large number of cosmetic ingredients are required in the design of cosmetics. To overcome this problem, a new optimization-based approach for expediting cosmetic formulation is presented. It exploits the use of a hierarchy of models in an iterative manner to refine the search for creating the highest-quality cosmetic product. First, a systematic procedure is proposed for optimization problem formulation, where the cosmetic formulation problem is defined, design variables are specified, and a set of models for sensorial perception and desired product properties are identified. Then, a solution strategy that involves iterative model adoption and two numerical techniques (i.e., generalized disjunctive programming reformulation and model substitution) is applied to improve the efficiency of solving the optimization problem and to find better solutions. The applicability of the proposed procedure and solution strategy is illustrated with a perfume formulation example.     

On the Role of Oxygen Storage in Three-Way Catalysis

The role of the so-called oxygen storage and release capacity (OSC) in promoting the activity of noble metals in the three-way catalysts (TWCs) is critically discussed. It is shown that the promoting effects of CeO₂ in the TWCs cannot be attributed to a simple redox type of effect according to the reaction CeO₂ ? CeO_{2 ? x} + x/2O₂, since multiple and sometimes intriguing effects of CeO₂ promoter have been observed, particularly in the latest generation of TWCs containing modified CeO₂–ZrO₂ mixed oxides.     

Energy-efficient directional routing between partitioned actors in wireless sensor and actor networks

Actor?actor communication is an important part of the functioning of wireless sensor?actor networks and enables the actor nodes to take coordinated action on a given event. Owing to various reasons such as actor mobility and low actor density, the actor network tends to get partitioned. The authors propose to use the underlying sensor nodes, which are more densely deployed, to heal these partitions. In order to maximise the utilisation of the limited energy available with the sensor nodes, a new routing protocol for actor?actor communication using directional antennas on the actor nodes is proposed. The authors contribution is threefold. First, using simulations they show that the problem of partitioning in the actor networks is significant and propose an architecture with directional antennas on actor nodes and sensor bridges to heal these partitions. Second, they identify the routing problem for this architecture based on a theoretical framework and propose centralised as well as distributed solutions to it. Third, they develop a routing protocol based on the distributed solution and show, using network simulations, that the proposed protocol not only heals the network partitions successfully, but also achieves high throughput and fairness across different flows, in addition to maximising the network lifetime.     

Investigation of adequacy of multi-sphere approximation of elliptical particles for DEM simulations

Adequacy of approximation of ellipsoidal particles composed of a set of sub-spheres for numerical Discrete Element Method (DEM) simulations is examined. The algorithm of adaptive hierarchical multi-sphere (MS) model is suggested for composing elliptical particles. Numerical simulation of the piling problem is used as a test problem for evaluating the adequacy of MS model approximation in comparison to the model of smooth ellipses for multiparticle system. The accuracy of MS approximation with the increasing number of sub-spheres is examined in detail by comparison of macroscopic and microscopic parameters of granular dynamics. It was determined that the data on macroscopic parameters yielded by the MS model tend to converge to those of the smooth ellipsoid with the increasing number of the constituent sub-spheres, and the MS model approximates the smooth perfect ellipsoid with a reasonable number of sub-spheres within the limits of the appropriate tolerance. It can be concluded that a multi-sphere model remains a realistic and relatively simple particle model applicable to DEM simulations of the behaviour of the real smooth and rough elliptically shaped particles.     

Determination of Thermal-Diffusivity Dependence on Temperature of Transparent Samples by Thermal Wave Method

The use of a typical measuring cryostat with a standard temperature controller was proposed for investigation of the temperature dependence of the thermal diffusivity of transparent samples. The basic idea is to use the cryostat heater to control the mean sample temperature and to generate the thermal wave in it, simultaneously. Because of the relatively high thermal inertia of the system, the measurements are carried out at frequencies not exceeding 50 mHz. The periodic temperature disturbance in the sample was detected optically by the use of the mirage effect. The proposed method was used for determination of the thermal diffusivity of yttrium aluminum garnet single crystals in a temperature range from 20 °C to 200 °C.     

The effect of solar radiation on the flavonol content in broccoli inflorescence

The effect of solar radiation on the quercetin and kaempferol contents in the inflorescence of three broccoli cultivars (‘Lord’, ‘Marathon’ and ‘Fiesta’) was investigated from 1999 to 2001. Great differences in the contents of both flavonols, dependent on growing time and cultivar, were found. Quercetin and kaempferol contents varied from 14.3 to 81.0 mg kg⁻¹ f.w. and from 35.9 to 213 mg kg⁻¹ f.w., respectively. Inflorescences of the cultivar ‘Lord’ were characterised by the highest mean content of quercetin and those of cultivar ‘Fiesta’ of kaempferol. The contents of both flavonols were highly positively correlated with total solar radiation in the period from planting to the harvest of broccoli inflorescences.     

Impaired antioxidant defence in guinea pig heart tissues treated with halothane

PURPOSE: To investigate the effects of halothane and halothane plus vitamin E treatment on myocardial free radical metabolism in guinea pigs. METHODS: Four groups of seven animals were studied: control, halothane, halothane plus vitamin E and vitamin E groups. In the halothane group, halothane 1.5% in oxygen was given for 90 min over three days. In the halothane plus vitamin E group, 300 mg.kg-1.day-1 vitamin E im was started three days before the first halothane treatment and continued for three days. Following sacrifice, the hearts were assayed for superoxide dismutase (SOD), glutathione peroxidase (GSH-Px) and catalase (CAT) and malondialdehyde (MDA) level was determined. Electron spin resonance (ESR) analysis and electron microscopy (EM) were also performed. RESULTS: In the halothane group, SOD activities and MDA concentrations were increased compared with control and GSH-Px and CAT activities were decreased. In the halothane plus vitamin E group, there were no differences in enzyme activity compared with halothane alone but the MDA level was decreased. In the vitamin E group, enzyme activities were increased compared with control. Mainly the CF3CHCl radical was identified by ESR analysis in heart tissues exposed to halothane and the concentration of this radical was reduced by vitamin E. Electron microscopy showed cytoplasmic vacuolisation and dilation in sarcoplasmic reticulum in the heart tissues exposed to halothane: both were prevented by vitamin E. CONCLUSION: Although halothane causes impairment in enzymatic antioxidant defence potential, due to lowered GSH-Px and CAT activity, and accelerates peroxidative reactions in the tissues affected, no subcellular damage occurred. Vitamin E may protect tissues against free radical attack by scavenging toxic free radicals formed in heart tissue during halothane anaesthesia.