Der einfluß von faseroberflächen auf die matrixhärtung bei faserverbundwerkstoffen

The influence of extraction of reinforced fibres on surface properties and the curing reaction of epoxy resin matrix in composites were investigated. With increasing fibre surface polarity, as the result of the extraction, the resin wettability was improved and the reaction rate of curing of the epoxy resin matrix increased. The wettability and the reaction rate oppositely decreased with decreasing fibre surface polarity.     

Mechanisms of Enzyme-Catalyzed Reduction of Two Carcinogenic Nitro-Aromatics, 3-Nitrobenzanthrone and Aristolochic Acid I: Experimental and Theoretical Approaches

This review summarizes the results found in studies investigating the enzymatic activation of two genotoxic nitro-aromatics, an environmental pollutant and carcinogen 3-nitrobenzanthrone (3-NBA) and a natural plant nephrotoxin and carcinogen aristolochic acid I (AAI), to reactive species forming covalent DNA adducts. Experimental and theoretical approaches determined the reasons why human NAD(P)H:quinone oxidoreductase (NQO1) and cytochromes P450 (CYP) 1A1 and 1A2 have the potential to reductively activate both nitro-aromatics. The results also contributed to the elucidation of the molecular mechanisms of these reactions. The contribution of conjugation enzymes such as N,O-acetyltransferases (NATs) and sulfotransferases (SULTs) to the activation of 3-NBA and AAI was also examined. The results indicated differences in the abilities of 3-NBA and AAI metabolites to be further activated by these conjugation enzymes. The formation of DNA adducts generated by both carcinogens during their reductive activation by the NOQ1 and CYP1A1/2 enzymes was investigated with pure enzymes, enzymes present in subcellular cytosolic and microsomal fractions, selective inhibitors, and animal models (including knock-out and humanized animals). For the theoretical approaches, flexible in silico docking methods as well as ab initio calculations were employed. The results summarized in this review demonstrate that a combination of experimental and theoretical approaches is a useful tool to study the enzyme-mediated reaction mechanisms of 3-NBA and AAI reduction.     

Experimental Phase Diagram Determination and Thermodynamic Assessment of the CeO2‐Gd2O3‐CoO System

New phase diagram data and a thermodynamic assessment of the CeO‐Gd₂O₃‐CoO system using the CALPHAD approach are presented. This information is needed to understand the surprisingly low sintering temperature (950°C–1050°C) of CeO₂‐based materials doped with small amounts of transition metal oxide (e.g., CoO). Experimental phase equilibria between 1100°C and 1300°C are reported based on the analysis of annealed and molten samples. No isolated compound exists in the ternary. At 1300°C the Co solubility in the ternary compounds Ce_1?x?yGd_xCo_yO_2?x/2?y (fluorite) is 2.7 mol% and is less than 1 mol% in the Gd_2?xCe_xO_3+x/2 (bixbyite). The Ce solubility in the perovskite GdCoO_3?δ was found to be 1 mol%. The lowest temperature eutectic melt in the ternary has a composition of 57.2 mol% Co and 41.1 mol% Gd melting at an onset temperature of 1303 ± 5°C, which is close to the binary eutectic in the Gd₂O₃‐CoO system at 60 ± 2 mol% Co and 1348 ± 1°C.     

Activation of Polycyclic Aromatic Compounds by cDNA-Expressed Phase I and Phase II Enzymes

A large number of human and other mammalian xenobiotic-metabolizing enzymes have been expressed in target cells of standard mutagenicity tests, such as Ames's Salmonella typhimurium strains and Chinese hamster V79 cells. These recombinant cells are useful for determining the ability of individual enzymes to activate (or inactivate) a given compound. In contrast to standard S9-mediated test systems, they also allow the detection of mutagenic metabolites that do not penetrate cell membranes--a situation often found with reactive phase II metabolites. We present mutagenicity data for benzo[ a ]pyrene and dibenzo[ a,l ]pyrene in V79-derived cells expressing human cytochrome P450 (CYP) 1A1, 1A2, and 1B1, and for 1-hydroxymethylpyrene, R - and S -1-( f -hydroxyethyl) pyrene, 4-hydroxycyclopenta[ def ]chrysene and N -hydroxy-2-acetylaminofluorene in V79-derived cells and/or Salmonella strains expressing the 11 human sulfotransferases (SULTs) identified. In some cases, allelic variants and orthologous enzymes from other mammalian species were also investigated. The data indicate that mutagenicity of many compounds is detected in the appropriate recombinant systems at extremely low substrate concentrations, that the activation of various promutagens is mediated with high specificity by only one or few enzyme forms, and that substantial differences may occur between alloenzymes from the same species and orthologous enzymes from different species. Such information could be important for understanding differences in susceptibility between tissues, species, individual genetic traits, and physiological states.     

Anodic stripping voltammetric measurement of trace heavy metals at antimony film carbon paste electrode

The antimony film carbon paste electrode (SbF-CPE) was prepared in situ on the carbon paste substrate electrode as a “mercury-free” electrochemical sensor. Its aptitude for measuring some selected trace heavy metals has been demonstrated in combination with square-wave anodic stripping voltammetry in non-deaerated model solutions of 0.01 M hydrochloric acid with pH 2. Some important operational parameters, such as deposition potential, deposition time, and concentration of antimony ions were optimized, and the electroanalytical performance of the SbF-CPE was critically compared with both bismuth film carbon paste electrode (BiF-CPE) and mercury film carbon paste electrode (MF-CPE) using Cd(II) and Pb(II) as test metal ions. In comparison with BiF-CPE and MF-CPE, the SbF-CPE exhibited superior electroanalytical performance in more acidic medium (pH 2) associated with favorably low hydrogen evolution, improved stripping response for Cd(II), and moreover, stripping signals corresponding to Cd(II) and Pb(II) at the SbF-CPE were slightly narrower than those observed at bismuth and mercury counterparts. In addition, the comparison with antimony film electrode prepared at the glassy carbon substrate electrode displayed higher stripping current response recorded at the SbF-CPE. The newly developed sensor revealed highly linear behavior in the examined concentration range from 5 to 50 μg L⁻¹, with limits of detection (3σ) of 0.8 μg L⁻¹ for Cd(II), and 0.2 μg L⁻¹ for Pb(II) in connection with 120 s deposition step, offering good reproducibility of ±3.8% for Cd(II), and ±1.2% for Pb(II) (30 μg L⁻¹, n = 10). Preliminary experiments disclosed that SbF-CPE and MF-CPE exhibit comparable performance for measuring trace concentration levels of Zn(II) in acidic medium with pH 2, whereas its detection with BiF-CPE was practically impossible. Finally, the practical applicability of SbF-CPE was demonstrated via measuring Cd(II) and Pb(II) in a real water sample.     

Insights into the simultaneous chronopotentiometric stripping measurement of indium(III), thallium(I) and zinc(II) in acidic medium at the in situ prepared antimony film carbon paste electrode

The simultaneous measurement of microgram per liter concentration levels of indium(III), thallium(I) and zinc(II) at the antimony film carbon paste electrode (SbF-CPE) is demonstrated. The antimony film was deposited in situ on a carbon paste substrate electrode and employed in chronopotentiometric stripping mode in deoxygenated solutions of 0.01 M hydrochloric acid (pH 2). The chronopotentiometric stripping performance of the SbF-CPE was studied and compared with constant current chronopotentiometric stripping and anodic stripping voltammetric operation. In comparison with its bismuth and mercury counterparts, the SbF-CPE exhibited advantageous electroanalytical performance; namely, at the bismuth film electrode, the measurement of zinc(II) was practically impossible due to hydrogen evolution, whereas the mercury film electrode exhibited a poorly developed signal for thallium(I). The SbF-CPE revealed favorable calculated LoDs (3σ) of 1.4 μg L⁻¹ for thallium(I) and 2.4 μg L⁻¹ for indium(III) along with good linear response in the examined concentration range from 10 to 100 μg L⁻¹ with correlations coefficients (R²) of 0.992 for thallium(I) and 0.994 for indium(III) associated with a 120 s deposition time. The chronopotentiometric stripping performance of the SbF-CPE was characterized also by satisfactory reproducibility of 1.62% for indium(III), 3.96% for thallium(I) and 2.11% for zinc(II) (c = 40 μg L⁻¹, n = 11).