Selectivity enhancement in the catalytic heterogeneous hydrogenation of limonene in supercritical carbon dioxide by an ionic liquid

Ionic liquids as coated catalysts or additives tremendously alter the selectivity pattern of the heterogeneous solid catalyst in the selective hydrogenation of limonene. The conventional monometallic ruthenium over alumina catalyst combined with an ionic liquid enables the one-pot synthesis of the intermediate p-menthene through limonene hydrogenation in supercritical carbon dioxide. Among eight screened imidazolium ILs, [C₁₀mim]NTf₂ was employed as additive, or as the coating agent of ruthenium catalyst in the reaction under supercritical conditions.The coating of the heterogeneous catalyst allows the selective production of p-menthene and increases the conversion level of limonene (>99%) compared to the conversion of limonene in the reaction carried out in the presence of an ionic liquid as an additive. Results of the catalyst recycling indicate that there is no depletion of catalyst reactivity even after four successive cycles of operation under the studied reaction conditions. Further hydrogenation of p-menthene is strongly inhibited by employing an ionic liquid. The solubility of limonene or p-menthene in an ionic liquid governs the selective hydrogenation of limonene towards p-menthene.     

Photoluminescence and energy transfer in transparent glass-ceramics based on GdF3:RE3+ (RE = Tb,Eu) nanocrystals

In the present work,the transparent oxyfluoride glass-ceramic samples containing GdF_3:RE~(3+)(RE=Tb,Eu) nanocrystals(nGCs) were fabricated via controlled heat-treatment of precursor xerogels prepared using a sol-gel method.The formation of GdF_3 nanocrystalline phase from gadolinium(III) trifluoroacetate was verified based on XRD measurements.The average crystal sizes calculated from Scherrer formula were estimated to～10 nm as well as～6 nm for Tb~(3+)-and Eu~(3+)-doped samples,respectively.The optical behavior of prepared sol-gel samples was evaluated based on photoluminescence excitation(PLE) and emission spectra(PL) as well as luminescence decay analysis.Obtained samples exhibit the ~5D_4→~7F_J(J=6-3,Tb~(3+))and the ~5D_0→~7F_J(J=0-4,Eu~(3+)) emission bands recorded within the visible spectral area under excitation at near-UV(393 nm(Eu~(3+)),351,369,378 nm(Tb~(3+))) as well as middle-UV illumination(273 nm(Gd~(3+))).Additionally,based on recorded decay curves,the luminescence lifetimes(τ_m) for the ~5D_4(Tb3+) and the ~5D_0(Eu~(3+))excited states were also evaluated.In general,recorded luminescence spectra and double-exponential character of decay curves for nGCs indicate a successful migration of Tb~(3+) and Eu~(3+) dopant ions from amorphous silicate framework to lowphonon energy GdF_3 nanocrystal phase.     

The Impact of Zeta Potential and Physicochemical Properties of TiO2‐Based Nanocomposites on Their Biological Activity

The aim of this research was to observe the relationship between zeta potential, morphology, surface area, porosity, chemical composition, and ecotoxicity of nanocomposite powders such as Au/TiO₂, Ag₂O/TiO₂, PdO/TiO₂, Ag/TiO₂/SiO₂, Ag/N(C)TiO₂, and SiO₂/TiO₂ from which Ag₂O/TiO₂, Ag/N(C)/TiO_2, and Ag/TiO₂/SiO₂ were exhibiting good antimicrobial properties. It was observed, that nanomaterials characterized by similar morphology and zeta potential revealed the similar toxic behavior. The samples of higher agglomeration and higher zeta potential, especially Ag/TiO₂/SiO₂ xerogel and TiO₂/SiO₂ aerogel were generally less ecotoxic to water organisms and plants. They were also not genotoxic in concentrations up to 500 and 250 mg/L, respectively.     

Selective Behaviour of Honeybees in Acquiring European Propolis Plant Precursors

Honey bees harvest resins from various plant species and use them in the hive as propolis. While there have been a number of studies concerning the chemical composition of this antimicrobial product, little is known about selective behavior and bee preference when different potential plant sources of resin are available. The main objective of this paper was to investigate some aspects of behavioral patterns of honeybees in the context of resin acquisition. Samples of propolis originating from temperate zones of Europe and the supposed botanical precursors of the product were analyzed. Taxonomical markers of bud resins of two white birch species, aspen, black poplar, horse-chestnut, black alder, and Scots pine were determined through GC-MS analysis. All these trees have been reported as sources of propolis, but comparisons of the chemical composition of their bud resins with the compositions of propolis samples from seven European countries have demonstrated the presence of taxonomical markers only from black poplar, aspen, and one species of birch. This suggests selective behavior during the collection of bud resins by honeybees. To examine the causes of such selectivity, the antimicrobial properties of bud resins were determined. Horse-chestnut resins had lower antimicrobial activity than the other resins which did not differ significantly.     

Nanoengineered biocomposite tricomponent polymer based matrices for bone tissue engineering

Nanoengineered biodegradable constructs based on synthetic and natural polymers enriched with hydroxyapatite (HA) nanoparticles have been found to mimic the extracellular matrix of bone tissue. The main objective of this study was to create biocomposite nanostructured scaffolds by incorporating collagen and HA nanoparticles into poly(L-lactic acid)-co-poly(?-caprolactone) by electrospinning. The fiber diameter of the composite PLCL/Col and PLCL/Col/HA fibers was smaller compared to PLCL. In vitro biocompatibility of the scaffolds studied using human fetal osteoblasts and EDX analysis showed high deposition of calcium on PLCL/Col/HA. The results shows that PLCL/Col/HA nanofibrous constructs have huge potential as substrates for bone regeneration.     

Learning-based algorithms in scheduling

The aim of the paper is to present a conception of intelligent learning-based algorithms for scheduling. A general knowledge based model of a vast class of discrete deterministic processes is given. The model is a basis for the method of the synthesis of intelligent, learning-based algorithms, that is described in the paper. The designing simulation experiments that use learning is also described. To illustrate the presented ideas, the scheduling algorithm for a special NP-hard problem is given. The significant feature of the problem is that the retooling time depends not only on a pair of jobs to be processed directly one after the other, but also on the subset of jobs already performed. The proof of the NP-hardness of the problem is also given in the paper.     

PHYSIOLOGICAL TESTING OF CARBON NANOTUBES: ARE THEY ASBESTOS-LIKE?

To determine whether carbon nanotubes can induce any significant health hazards we applied methods routinely used in the pathophysiological testing of asbestos-induced disease to show that the soot with a high content of CNTs does not induce any abnormalities of pulmonary function or measurable inflammation in guinea pigs treated with carbon nanotubes.     

Characterization of black nickel solar absorber coatings electroplated in a nickel chlorine aqueous solution

Black nickel coatings electroplated in a nickel- and sodium chlorine aqueous solution have been prepared and parameters in the process have been optimized to achieve optimal solar selectivity. The best result is a solar absorptance of 0.96 and a thermal emittance of 0.10, as also has been obtained previously for the same type of coating ¹H(¹⁵N, αγ)¹²C nuclear resonance reaction (NRR) have contributed with new information about surface chemical composition, morphology and atomic composition in depth profile. These investigations reveal that the coating is porous and contains mainly metallic nickel at the substrate–coating interface and mainly nickel hydroxide at the front surface.The stability of the coating has been tested regarding high-temperature and condensation at high humidity. It has been found that the solar absorptance changes initially, during the first hour of exposure at high temperature, but will then stabilize. Condensation causes a more severe attack on the coating by cracking it. This is contradictory to the results from previous tests at high temperature and humidity in which the black nickel coating was found to be resistant     

Effects of some technological processes on glucosinolate contents in cruciferous vegetables

Effects of blanching, boiling and freezing of selected cruciferous vegetables (Brussels sprouts, white and green cauliflower, broccoli, and curly cale) on their glucosinolate (GLS) contents were determined. It was found that blanching and cooking of the vegetables led to considerable (P < 0.05) losses of total GLS, from 2.7 to 30.0% and from 35.3 to 72.4%, respectively. No systematic changes in total GLS were found in the vegetables that were blanched and frozen for 48 h. In addition, the highest concentration of cancer-protective compounds, such as aliphatic and indole GLS, were found in Brussels sprouts (sinigrin and glucobrassicin) and in broccoli (glucoraphanin).