Investigation of bounds on particle packing in pebble-bed high temperature reactors

Models and methods are presented for determining practical limits of the packing density of TRISO particles in fuel pebbles for a pebble-bed reactor (PBR). These models are devised for designing and interpreting fuel testing experiments. Two processes for particle failure are accounted for: failure of touching particles at the pressing stage in the pebble manufacturing process and failure due to inner pressure buildup during irradiation. The second process gains importance with increasing fuel temperature, which limits the particle packing density and the corresponding fuel enrichment. Suggestions for improvements to the models are presented.     

Development of an empirical mathematical model for describing and optimizing the hygiene potential of a thermophilic anaerobic bioreactor treating faeces.

Poor sanitation and insufficient disposal of sewage and faeces are primarily responsible for water associated health problems in developing countries. Domestic sewage and faeces are prevalently discharged into surface waters which are used by the inhabitants as a source for drinking water. This paper presents a decentralized anaerobic process technique for handling of such domestic organic waste. Such an efficient and compact system for treating faeces and food waste may be of great benefit for developing countries. Besides a stable biogas production for energy generation, the reduction of bacterial pathogens is of particular importance. In our research we investigated the removal capacity of the reactor concerning pathogens, which has been operated under thermophilic conditions. Faecal coliforms and intestinal enterococci have been detected as indicator organisms for bacterial pathogens. By the multiple regression analysis technique an empirical mathematical model has been developed. The model shows a high correlation between removal efficiency and both, hydraulic retention time (HRT) and temperature. By this model an optimized HRT for defined bacterial pathogens effluent standards can be easily calculated. Thus, hygiene potential can be evaluated along with economic aspects. In this paper not only results for describing the hygiene potential of a thermophilic anaerobic bioreactor are presented, but also an exemplary method to draw the right conclusions out of biological tests with the aid of mathematical tools.     

Gas-phase selective oxidation of toluene on TiO2–sepiolite supported vanadium oxides: Influence of vanadium loading on conversion and product selectivities

Gas-phase selective oxidation of toluene has been carried out on vanadium oxide systems (5–20 wt.% of V₂O₅, equivalent to 0.4–1.7 theoretical monolayers) supported on TiO₂–sepiolite (with titania loading around the theoretical monolayer, 12 wt.%) and on sepiolite. A study has been made on both the influence of vanadia loading and of the support on the catalytic behaviour of the supported vanadium systems. The reducibility by H₂ TPR was also studied as well as the acid and basic/redox sites from the results of conversion of the 2-propanol test reaction of the solids. Benzaldehyde, benzoic acid and several coupling products were the main ones detected, attaining over 50% selectivity towards the benzaldehyde and benzoic acid products at a total conversion around 10%. The activity and selectivity to the selective products exhibited by vanadium systems supported on mixed support were superior to those exhibited by the systems supported on sepiolite and increased notably in both series with the increase in vanadium loading. The best catalytic behaviour exhibited by the vanadium systems supported on mixed support, which also exhibited the highest density of sites capable of being reduced (as well as their reducibility) and of those responsible for propanone formation, could be attributed not only to the different balance of the vanadia species existing in the two supports (monomeric + oligomeric/polymeric), but also to such other factors as the nature of the support and, concretely, its chemical composition.     

Wide-band fiber optic signal processor

Operation of a 16-tap fiber-optic delay line configured as a bandpass filter with a fundamental frequency of 2.0 GHz over the frequency range from 0 to 12.5 GHz is discussed. Equal tap weights and spacings were used to facilitate comparison of experimental and predicted results. More than 10¹¹ analog multiplications per second are performed in this relatively simple signal processing system. Other processors for performing functions such as matched filtering and correlation can be implemented by appropriate choice of the mirror reflectances and fiber lengths     

Mean value analysis of closed queueing networks with Erlang service time distributions

The classical mean value analysis approach is extended to single class closed queueing networks containing Erlang service time distributions and FCFS scheduling disciplines. A new formula for the mean residence time of jobs is derived. Each iteration provides self-checks for validity, and is repeated whenever invalid results are detected. On the average, the solutions obtained vary by less than five percent from their respective simulation results.     

Development of sealing compositions with nanostructure iron-based fillers

The possibility of utilizing nanopowders of iron and Fe-Co-Ni produced bu a thermochemical method in the fabrication of sealing composition materials is investigated. It is established that such hermetic sealing composition materials function reliably under extremal conditions and guarantee elevated strength of adhesion to the surface of the metal and high corrosion and temperature stability. __________ Translated from Poroshkaya Metallurgiya, Nos. 3–4(448), pp. 112–117, March–April, 2006.     

Applying the common criteria in systems engineering

The National Institute of Standards and Technology has proposed using the common criteria and system-level protection profiles (SLPPs) to specify security requirements in large systems, such as those used in air traffic management. This article summarizes experience with SLPP and security targets for the US Federal Aviation Administration's National Airspace System. The authors review the FAA efforts, highlight the problems encountered, and offer suggestions for future work, calling for more research on linking systems, software, and security requirements engineering with SLPP; clearer ties between security specifications and system certification; and better guidance on the appropriate use of SLPP as a prerequisite to widespread use.