A Two-Level Spreading-despreading CDMA System and Its Performance Evaluation

1　IntroductionHowtosuppresstheinterferenceintheCDMAsystems,includingtheSelfInterference(SI) ,Mul tipleAccessInterference(MAI)andtheAdjacentCellInterference(ACI) ,isthekeypointinimprov ingthesystemperformanceandcapacity .Insteadofthecomplicatedspecializedsignalprocessingtech niquesusedbefore[1～ 4] ,spreadingsequenceswithgoodcorrelationpropertiescanimprovethesystemperformanceradically[5] .InRef.[6～ 9],theconceptofZeroCorrelationZone (ZCZ) ,whichisequivalenttothegeneralizedothogonal…     

我国水库移民工作经验分析与对策探讨

水库移民是一项对水利水电事业发展极为重要的复杂工程。文章阐述了工程移民安置的几点经验和教训,对移民过程中出现的问题进行分析并提出具体的解决方案。     

浅谈城市集中供热工程造价的控制

就城市集中供热工程造价的控制问题，从对设计阶段的成本、施工过程，加强材料成本、工程结算的控制几方面对其进行了详细的阐述，最后对工料分析与检查方面进行了论述，以提高供热企业的投资效益。     

奥氏体锰钢轨部件的修理和装配

奥氏体锰钢是一种非常坚硬的无磁性合金钢，它的性能和大多数普遍使用的抗磨损结构钢不同。对许多轨道工程部件来说，它是一种更可取的材料。铁路辙岔和交叉处是重要的，但其它重要部件还包括开关的防护装置、铸造镶嵌件和桥式轨道部件。奥氏体锰钢承载力高，耐久性好。在冲击和负重下不会断裂。它的淬火硬化能力是最主要的一个优势。零部件表面在冲击下硬化，有些变形，但下面的母材仍保留原来的硬度。裂缝的蔓延速度非常慢。     

产品设计方案的多目标决策分析及其智能支持系统

用模糊多目标决策方法对产品设计方案进行决策分析并设计出相应的智能计算机支持系统，实例证明这一方法在实际应用中是有效的和可靠的。     

Effect of Processing Temperature on the Morphology of Silicon Carbide Whiskers

Two kinds of SiC whiskers were annealed at temperatures similar to those for the processing of ceramic matrix composites. The morphology and structure of the as-received and postannealed whiskers were investigated by SEM, TEM, and XRD, and the influence of processing temperature on the mechanical properties of ceramic matrix composites was discussed.     

A reliable and manufacturable method to induce a stress of >1 GPa on a P-channel MOSFET in high volume manufacturing

This letter discusses a reliable and manufacturable integration technique to induce greater than 1 GPa of stress into a p-channel MOSFET, which will be required to increase the drive current beyond 1 mA//spl mu/m at the sub-90-nm process generation. Uniaxial compressive stress is introduced into the p-channel by both a selective deposition of SiGe in the source/drain and an engineered 2.5-GPa compressively stressed nitride. The highest to date compressively stressed SiN film is obtained by heavy ion bombardment during the deposition of the film.     

一种控制盐层段井眼闭合率的钻井液密度新公式

针对钻井过程中钻遇的盐层段井眼蠕变缩径问题,利用弹塑性力学理论,蠕变本构方程采用Heard蠕变方程,在平面应变和均匀地应力假设下,推导出控制井眼收缩的钻井液密度新公式,该公式与前人推导的公式不同。通过理论分析,指出产生差异的根本原因在于蠕变应力差(极坐标下表示的径向应力与切向应力之差)公式的推导上,用有限元法计算结果对理论公式进行检验,证明是可行的。对文中的力学模型采用有限元法建模、求解,利用求解结果对各应力差公式进行验证,得出:根据文中公式计算结果与有限元法计算结果完全一致,而据前人公式计算结果偏离有限元计算值较大,从而间接证明了该钻井液密度新公式的推导更严密,更准确。     

东营凹陷古近系烃源岩超压特征及分布规律

统计分析1307口探井实测压力系数和83l口探井使用的钻井液密度数据，发现东营凹陷古近系沙三段、沙四段普遍存在异常超压，超压(压力系数1．1-1．5)主要出现在2100-3500m深度，强超压(压力系数大于1．5)主要出现在2800-3500m深度。东营凹陷沙三段、沙四段主力烃源岩超压平面分布具有北高南低、东高西低的总体特点，超压主要分布在洼陷带、断裂构造带和中央背斜带上。烃源岩压力系数等值线北部陡坡带比较密集，南部缓坡带相对稀疏。生油洼陷中心附近异常高压带的分布与生油洼陷基本一致，洼陷深陷区压力系数很大，向周围斜坡和构造高部位呈辐射状逐渐减小至正常，压力分布带与洼陷、边缘斜坡和构造较高部位的欠压实与压实带发育、分布规律的一致性很好。图3表l参9     

Insulating safety analysis of the hot-line sweeping robot

This paper presents a method of calculating the insulating safety distances for hot-line working robots at high voltage when dielectric is adulterated with conducts. Also, finite element method is adopted to calculate the electric field strength to find whether it is beyond the critical. The above methods have been applied to analyze the insulating safety of the robot for hot-line sweeping post insulators in a 220 KV substation. They have also been testified by experimentations.