Organic Phenolic Configurationally Locked Polyene Single Crystals for Electro‐optic and Terahertz Wave Applications

We investigate a configurationally locked polyene (CLP) crystal 2‐(3‐(4‐hydroxystyryl)‐5,5‐dimethylcyclohex‐2‐enylidene)malononitrile (OH1) containing a phenolic electron donor, which also acts as a hydrogen bond donor. The OH1 crystals with orthorhombic space group Pna2₁ (point group mm2) exhibit large second‐order nonlinear optical figures of merit, high thermal stability and very favorable crystal growth characteristics. Higher solubility in methanol and a larger temperature difference between the melting temperature and the decomposition temperature of OH1 compared to analogous CLP crystals, are of advantage for solution and melt crystal growth, respectively. Acentric bulk OH1 crystals of large sizes with side lengths of up to 1 cm with excellent optical quality have been successfully grown from methanol solution. The microscopic and macroscopic nonlinearities of the OH1 crystals are investigated theoretically and experimentally. The OH1 crystals exhibit a large macroscopic nonlinearity with four times larger powder second harmonic generation efficiency than that of analogous CLP crystals containing dimethylamino electron donor. A very high potential of OH1 crystals for broadband THz wave emitters in the full frequency range of 0.1–3 THz by optical rectification of 160 fs pulses has been demonstrated.     

Light‐Fueled,Spatiotemporal Modulation of Mechanical Properties and Rapid Self‐Healing of Graphene‐Doped Supramolecular Elastomers

Gaining spatially resolved control over the mechanical properties of materials in a remote, programmable, and fast‐responding way is a great challenge toward the design of adaptive structural and functional materials. Reversible, temperature‐sensitive systems, such as polymers equipped with supramolecular units, are a good model system to gain detailed information and target large‐scale property changes by exploiting reversible crosslinking scenarios. Here, it is demonstrated that coassembled elastomers based on polyglycidols functionalized with complementary cyanuric acid and diaminotriazine hydrogen bonding couples can be remotely modulated in their mechanical properties by spatially confined laser irradiation after hybridization with small amounts of thermally reduced graphene oxide (TRGO). The TRGO provides an excellent photothermal effect, leads to light‐adaptive steady‐state temperatures, and allows local breakage/de‐crosslinking of the hydrogen bonds. This enables fast self‐healing and spatiotemporal modulation of mechanical properties, as demonstrated by digital image correlation. This study opens pathways toward light‐fueled and light‐adaptive graphene‐based nanocomposites employing molecularly controlled thermal switches.     

Ultrathin Polydopamine Films with Phospholipid Nanodiscs Containing a Glycophorin A Domain

Cellular membranes have long served as an inspiration for nanomaterial research. The preparation of ultrathin polydopamine (PDA) films with integrated protein pores containing phospholipids and an embedded domain of a membrane protein glycophorin A as simplified cell membrane mimics is reported. Large area, ultrathin PDA films are obtained by electropolymerization on gold surfaces with 10–18 nm thickness and dimensions of up to 2.5 cm². The films are transferred from gold to various other substrates such as nylon mesh, silicon, or substrates containing holes in the micrometer range, and they remain intact even after transfer. The novel transfer technique gives access to freestanding PDA films that remain stable even at the air interfaces with elastic moduli of ≈6–12 GPa, which are higher than any other PDA films reported before. As the PDA film thickness is within the range of cellular membranes, monodisperse protein nanopores, so‐called “nanodiscs,” are integrated as functional entities. These nanodisc‐containing PDA films can serve as semi‐permeable films, in which the embedded pores control material transport. In the future, these simplified cell membrane mimics may offer structural investigations of the embedded membrane proteins to receive an improved understanding of protein‐mediated transport processes in cellular membranes.     

Novel low-voltage low-power high-precision CCII± based on bulk-driven folded cascode OTA

This paper presents possible approaches to the design of a novel low-voltage, low-power, and high-precision current conveyor of the second generation (CCII±) based on the bulk-driven folded cascode operational transconductance amplifier (OTA) with extended input common-mode voltage range. This CCII± utilizes bulk-driven differential pairs to obtain a nearly rail-to-rail input stage at a low supply voltage. The proposed conveyor operates at a low supply voltage of ±400 mV with a reduced power consumption of only 64 μW. A current-mode multifunction filter is presented as an application of the CCII±. This filter provides five transfer functions simultaneously, namely low-pass, band-pass, high-pass, notch, and all-pass. The filter has the following properties and advantages: it employs three bulk-driven current conveyors BD-CCII±, three grounded resistors, and two grounded capacitors, which is suitable for integrated circuit implementation. Furthermore, the input signal is connected to the low-impedance X terminal of the BD-CCII± whereas the output signals are taken from the high-impedance output terminals Z+ and Z−. Finally, the pole frequency and quality factor of the designed filter are tunable independent of each other. PSpice simulation results using the 0.18 μm CMOS technology are included to prove the results.     

Iron Oxide‐Labeled Collagen Scaffolds for Non‐Invasive MR Imaging in Tissue Engineering

Non‐invasive imaging holds significant potential for implementation in tissue engineering. It can be used to monitor the localization and function of tissue‐engineered implants, as well as their resorption and remodelling. Thus far, however, the vast majority of effort in this area of research have focused on the use of ultrasmall super‐paramagnetic iron oxide (USPIO) nanoparticle‐labeled cells, colonizing the scaffolds, to indirectly image the implant material. Reasoning that directly labeling scaffold materials might be more beneficial (enabling imaging also in the case of non‐cellularized implants), more informative (enabling the non‐invasive visualization and quantification of scaffold degradation), and easier to translate into the clinic (cell‐free materials are less complex from a regulatory point‐of‐view), three different types of USPIO nanoparticles are prepared and incorporated both passively and actively (via chemical conjugation; during collagen crosslinking) into collagen‐based scaffold materials. The amount of USPIO incorporated into the scaffolds is optimized, and correlated with MR signal intensity, showing that the labeled scaffolds are highly biocompatible, and that scaffold degradation can be visualized using MRI. This provides an initial proof‐of‐principle for the in vivo visualization of the scaffolds. Consequently, USPIO‐labeled scaffold materials seem to be highly suitable for image‐guided tissue engineering applications.     

An Extensible Code for Correcting Multiple Cell Upset in Memory Arrays

As the microelectronics technology continuously advances to deep submicron scales, the occurrence of Multiple Cell Upset (MCU) induced by radiation in memory devices becomes more likely to happen. The implementation of a robust Error Correction Code (ECC) is a suitable solution. However, the more complex an ECC, the more delay, area usage and energy consumption. An ECC with an appropriate balance between error coverage and computational cost is essential for applications where fault tolerance is heavily needed, and the energy resources are scarce. This paper describes the conception, implementation, and evaluation of Column-Line-Code (CLC), a novel algorithm for the detection and correction of MCU in memory devices, which combines extended Hamming code and parity bits. Besides, this paper evaluates the variation of the 2D CLC schemes and proposes an additional operation to correct more MCU patterns called extended mode. We compared the implementation cost, reliability level, detection/correction rate and the mean time to failure among the CLC versions and other correction codes, proving the CLCs have high MCU correction efficacy with reduced area, power and delay costs.     

Applications of one-cycle control to improve the interconnection of a solid oxide fuel cell and electric power system with a dynamic load

Adding distributed generation (DG) is a desirable strategy for providing highly efficient and environmentally benign services for electric power, heating, and cooling. The interface between a solid oxide fuel cell (SOFC), typical loads, and the electrical grid is simulated in Matlab/Simulink and analyzed to assess the interactions between DG and the electrical grid. A commercial building load profile is measured during both steady-state and transient conditions. The load data are combined with the following models that are designed to account for physical features: a One-Cycle Control grid-connected inverter, a One-Cycle Control active power filter, an SOFC, and capacitor storage. High penetration of DG without any power filter increases the percentage of undesirable harmonics provided by the grid, but combined use of an inverter and active power filter allows the DG system interconnection to improve the grid tie-line flow by lowering total harmonic distortion and increasing the power factor to unity.     

Theranostic USPIO‐Loaded Microbubbles for Mediating and Monitoring Blood‐Brain Barrier Permeation

Efficient and safe drug delivery across the blood‐brain barrier (BBB) remains one of the major challenges of biomedical and (nano‐) pharmaceutical research. Here, it is demonstrated that poly(butyl cyanoacrylate)‐based microbubbles (MB), carrying ultrasmall superparamagnetic iron oxide (USPIO) nanoparticles within their shell, can be used to mediate and monitor BBB permeation. Upon exposure to transcranial ultrasound pulses, USPIO‐MB are destroyed, resulting in acoustic forces inducing vessel permeability. At the same time, USPIO are released from the MB shell, they extravasate across the permeabilized BBB and they accumulate in extravascular brain tissue, thereby providing non‐invasive R ₂*‐based magnetic resonance imaging information on the extent of BBB opening. Quantitative changes in R ₂* relaxometry are in good agreement with 2D and 3D microscopy results on the extravascular deposition of the macromolecular model drug fluorescein isothiocyanate (FITC)‐dextran into the brain. Such theranostic materials and methods are considered to be useful for mediating and monitoring drug delivery across the BBB and for enabling safe and efficient treatment of CNS disorders.     

Improving Reconfigurable Systems Reliability by Combining Periodical Test and Redundancy Techniques: A Case Study

This paper revises and introduces to the field of reconfigurable computer systems, some traditional techniques used in the fields of fault-tolerance and testing of digital circuits. The target area is that of on-board spacecraft electronics, as this class of application is a good candidate for the use of reconfigurable computing technology. Fault tolerant strategies are used in order for the system to adapt itself to the severe conditions found in space. In addition, the paper describes some problems and possible solutions for the use of reconfigurable components, based on programmable logic, in space applications.