Thermal stability and crystallisation of a Zr55Cu30Al10Ni5 bulk metallic glass studied by in situ ultrasonic echography

An original in situ ultrasonic echography technique was used to study the thermal stability and crystallisation of a Zr₅₅Cu₃₀Al₁₀Ni₅ bulk metallic glass between RT and 630 °C. Changes in Young's modulus with temperature were reported allowing to study the supercooled-liquid state and the crystallisation process. Investigations of viscoelastic properties gave information on the correlation factor (hierarchically correlated motion theory) and three distinct crystallisation stages were observed. Their kinetics were studied using Voigt's and Reuss' approximations for a two-phase material and comparisons with the Johnson–Mehl–Avrami–Kolmogorov theory allowed us to consider a mixed surface/internal nucleation for the first stage and a surface nucleation for the two last stages.     

Landmark Matching via Large Deformation Diffeomorphisms on the Sphere

This paper presents a methodology and algorithm for generating diffeomorphisms of the sphere onto itself, given the displacements of a finite set of template landmarks. Deformation maps are constructed by integration of velocity fields that minimize a quadratic smoothness energy under the specified landmark constraints. We present additional formulations of this problem which incorporate a given error variance in the positions of the landmarks. Finally, some experimental results are presented. This work has application in brain mapping, where surface data is typically mapped to the sphere as a common coordinate system.     

Tensile basic creep versus compressive basic creep at early ages: comparison between normal strength concrete and a very high strength fibre reinforced concrete

The paper presents experimental results concerning the comparison of tensile and compressive basic creep behaviours at early ages of two different concretes: a normal strength concrete (NSC) and a very high strength fibre reinforced concrete (HPFRC). This research project has been done in the context of a bilateral collaboration between Polytechnique Montreal and IFSTTAR. Observations on the HPFRC showed specific compressive creep similar to the specific tensile creep. Moreover, the specific creep curves obtained under compressive and tensile loading had always positive values, i.e. they were in same direction of the applied load on specimens. Measurements made on the NSC revealed specific compressive creep with positive values (in the loading direction). However, specific tensile creep presented negative values (opposite direction of loading) for a long period. A physical explanation based on the existence of two mechanisms with opposite effect is proposed to describe these basic creep results. The first mechanism is a coupling between the microcracking process and the water transfers that lead to additional self-drying shrinkage; the second mechanism is the self-healing of concrete induced by the microcracking.     

Impact of Blend Morphology on Interface State Recombination in Bulk Heterojunction Organic Solar Cells

This work is a reinvestigation of the impact of blend morphology and thermal annealing on the electrical performance of regioregular‐P3HT:PC₆₀BM bulk heterojunction organic solar cells. The morphological, structural, and electrical properties of the blend are experimentally investigated with atomic force microscopy, X‐ray diffraction, and time‐of‐flight measurements. Current–voltage characteristics of photodiode devices are measured in the dark and under illumination. Finally, the existence of exponential electronic band tails due to gap states is experimentally confirmed by measuring the device spectral response in the subband gap regime. This method reveals the existence of a large density of gap states, which is partially and systematically reduced by thermal annealing. When the band tails are properly accounted for in the drift and diffusion simulations, experimentally measured charge transport characteristics, under both dark and illuminated conditions and as a function of annealing time, can be satisfactorily reproduced. This work further confirms the critical impact of tails states on the performance of solar cells.     

In Situ TEM Observation of the Behavior of an Individual Fullerene-Like MoS<Subscript>2</Subscript> Nanoparticle in a Dynamic Contact

Inorganic fullerene-(IF)-like nanoparticles made of metal dichalcogenides (IF-MoS₂, IF-WS₂) have been known to be effective as anti-wear and friction modifier additives under boundary lubrication. The lubrication mechanism of these nanoparticles has been widely investigated in the past and even if the exfoliation and third body transfer of molecular sheets onto the asperities constitute the prevalent mechanism for the improved tribological behavior of IF nanoparticles, it has also been suggested that a rolling friction process could also play a role for well crystallized and spherical particles. In this study, in situ Transmission Electron Microscopy (TEM) observations of the behavior of single IF-MoS₂ nanoparticles were conducted using a sample holder that combines TEM and Atomic Force Microscopy (AFM) which simultaneously can apply normal and shear loads. It was shown that depending on the test conditions, either a rolling process or a sliding of the fullerenes could be possible. These in situ TEM observations are the first carried out with IF nanoparticles.     

IL-17A in Human Liver: Significant Source of Inflammation and Trigger of Liver Fibrosis Initiation

IL-17A is considered to guide liver inflammation and fibrosis. From twenty-two human liver samples of different fibrosis stages (F0 to F4), IL-17A, IL-22, and TGFβ1 protein expression in liver tissue lysates were analyzed. Ten paired samples of liver tissue (F0–F1 stage) and blood from the same patient were used to analyze intrahepatic and blood T-lymphoid IL-17A⁺ cells by flow cytometry. The analyses have been performed regardless of pathology, considering the stage of fibrosis. Human liver tissue was used for the primary human liver slice cultures, followed by subsequent cytokine stimulation and fibrotic markers’ analysis by ELISA. IL-17A production in human liver tissue was significantly higher in the early fibrotic stage compared with the advanced stage. Th17 T cells and, to a lesser extent, MAIT cells were the main sources of IL-17A in both compartments, the liver and the blood. Moreover, the presence of liver Th17IL-17A⁺INFγ⁺ cells was detected in the liver. IL-17A stimulation of human liver slice culture increased the expression of profibrotic and pro-inflammatory markers. IL-17A, secreted by Th17 and MAIT cells in the liver, triggered fibrosis by inducing the expression of IL-6 and profibrotic markers and could be a target for antifibrotic treatment. Further amplitude studies are needed to confirm the current results.     

Application of a response surface method to the optimal design of the wall temperature profiles in extrusion die

A new approach to the optimal design of the die wall temperature profile in polymer extrusion processes is presented. In this approach, optimization of the design variables is conducted by a Response Surface Method (RSM) and the Sequential Quadratic Programming (SQP) algorithm. Design of experiment (DoE) needed for the construction of the response surface is used to evaluate the objective and the constraint functions on the basis of a finite element method (FEM). Two designs of experiments are used and the performances of the optimization results are compared with respect to efficiency and ability to obtain a global optimum. Typically, for extrusion die design, the objective function states that the average velocity across the die exit is uniform. Constraints are used to limit the pressure drop in the die. For this purpose, we optimize the wall temperature profile of a coat hanger die in a heterogeneous way, (i.e. the wall temperature may not be constant in the entire die). The melt temperature enables us to locally control the viscosity, which influences the flows in the various zones. The effect of the design variables in the objective and constraint functions is investigated using Taguchi method. The flow analysis results are then combined with an automatic optimization algorithm to provide a new profile of the die wall temperature distributions.     

3-D deformable image registration: a topology preservation scheme based on hierarchical deformation models and interval analysis optimization.

This paper deals with topology preservation in three-dimensional (3-D) deformable image registration. This work is a nontrivial extension of, which addresses the case of two-dimensional (2-D) topology preserving mappings. In both cases, the deformation map is modeled as a hierarchical displacement field, decomposed on a multiresolution B-spline basis. Topology preservation is enforced by controlling the Jacobian of the transformation. Finding the optimal displacement parameters amounts to solving a constrained optimization problem: The residual energy between the target image and the deformed source image is minimized under constraints on the Jacobian. Unlike the 2-D case, in which simple linear constraints are derived, the 3-D B-spline-based deformable mapping yields a difficult (until now, unsolved) optimization problem. In this paper, we tackle the problem by resorting to interval analysis optimization techniques. Care is taken to keep the computational burden as low as possible. Results on multipatient 3-D MRI registration illustrate the ability of the method to preserve topology on the continuous image domain.